Kyocera KM 1650 User Manual

Printer Settings 
ADVANCED OPERATION GUIDE 2-53
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when 
staples have run out while stapling is performed.
NOTE: This setting is displayed only if the optional Finisher is installed.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Finishing 
Error and press [Enter].
3Press S or T to select Staple 
Setting and press [Enter].
4Press S or T to select On or Off 
and...

Printer Settings 
2-54 ADVANCED OPERATION GUIDE
Printing a Service Status Page
The Service Status Page contains more detailed printer setting information 
than the Status Page. This page is mainly used by service personnel for 
maintenance. Use the following procedure to print this page if required.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Service 
and press [Enter].
3Press S or T to select Print 
Status Page and press [Enter].
4Press S or T to...

ADVANCED OPERATION GUIDE 3-1
3 System Settings
This chapter explains the system settings available on the 
machine.
• Copy Default Settings................................................... 3-2
• Machine Default Settings ........................................... 3-14
• Viewing and Printing the Total Counter ...................... 3-28
• Report Output ............................................................. 3-30
• Language Setting ....................................................... 3-32
• User...

System Settings 
3-2 ADVANCED OPERATION GUIDE
Copy Default Settings
Initial Mode is the state the machine enters after warm-up or if Reset is 
pressed. If no operations are performed for a preset period of time, the 
machine returns to initial mode. Any settings that have been selected will 
be cleared. 
In the factory default setting, paper of the same size as the original is 
selected automatically (Auto Paper Selection mode), the copy 
magnification ratio is set to 100 %, the number of copies to be...

System Settings 
ADVANCED OPERATION GUIDE 3-3
Access the Copy Default Screen
Use the following procedure to access the Copy Default screen.
1Press [System Menu / Counter].
2Press S or T to select Copy 
default and press [Enter].
3Use the keypad to enter the 4 digit 
management code. 
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For further information 
refer to...

System Settings 
3-4 ADVANCED OPERATION GUIDE
Exposure Mode
Set the default Exposure mode to Auto or Manual.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Exposure 
Mode and press [Enter].
3Press S or T to select Auto or 
Manual as the default setting and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Original Image Quality
Use to set the default Original Image Quality mode.
1Display the Copy Default screen, refer to...

System Settings 
ADVANCED OPERATION GUIDE 3-5
3Press S or T to select On to 
enable Ecoprint Mode as the 
default. If you do not wish to use 
EcoPrint Mode as the default, 
select Off. Press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Background Color Adjustment
If the Background Color is too dark or light, use this option to adjust it.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select 
Background adjst and press 
[Enter]....

System Settings 
3-6 ADVANCED OPERATION GUIDE
Paper Type in Auto Paper Selection
Paper selected in Auto Paper Selection mode can be limited to a certain 
paper type.
Paper types that can be set: Plain, Transparency, Preprinted, Labels, 
Bond, Recycled, Vellum, Rough, Letterhead, Color, Prepunched, 
Envelope, Cardstock, Thick paper, High quality, and Custom 1 (to 8)
NOTE: You can select a paper type from the paper types that are 
currently set for the cassettes, refer to Paper Type (cassettes 1 to 4), on...

System Settings 
ADVANCED OPERATION GUIDE 3-7
Priority Cassette
You can select the cassette (1 to 4) that is automatically selected with 
priority.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the 
optional Paper Feeder. For the 20 and 25 ppm models, cassettes 3 and 4 
are included in the optional Paper Feeder. This setting displays only if the 
optional Paper Feeder is installed.
IMPORTANT: You cannot set the Multi-Bypass Tray as the priority 
cassette.
1Display the Copy Default screen,...

System Settings 
3-8 ADVANCED OPERATION GUIDE
Auto Exposure Adjustment
Adjusts the overall density in Auto Exposure mode.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Adj.Auto 
expos and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto OCR Exposure Adjustment
Adjusts the overall density of scanning for...