Kyocera KM 1650 User Manual

System Settings 
ADVANCED OPERATION GUIDE 3-19
4Press S or T to select On or Off 
and press [Enter].
5When you have finished changing 
the settings, press S or T to 
select End and press [Enter].
6Press [Reset]. The Copier Basic screen returns.
Custom Paper Type
Printing onto prepunched paper, preprinted paper or letterhead in one-
sided mode and two-sided mode from the same paper source may cause 
displacement of hole positions, or reverse orientations on both sides. Set 
Match Print Direction to match...

System Settings 
3-20 ADVANCED OPERATION GUIDE
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Special P. 
type and press [Enter].
3Press S or T to select Match 
Print Direction or Fast Mode and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Original Orientation
Use to set the default Original Orientation.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T...

System Settings 
ADVANCED OPERATION GUIDE 3-21
2Press S or T to select Sleep 
mode time and press [Enter].
3Press < or > to select the time 
required from 1 to 240 minutes or 
1 to 120 minutes and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Low Power Time
Use to set the time that elapses before Low Power mode is automatically 
activated.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute...

System Settings 
3-22 ADVANCED OPERATION GUIDE
NOTE: This item is displayed only if the optional Finisher or Job 
Separator is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Copy 
Otput Destn and press [Enter].
3Press S or T to select the output 
destination required and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Fax Output Destination
Use to set the paper output destination with priority for...

System Settings 
ADVANCED OPERATION GUIDE 3-23
Default Operation Mode
Select the default screen to be displayed when the power is switched on. 
The Copy or Fax screen can be displayed.
NOTE: This item is displayed only if the optional Fax kit is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Main 
mode and press [Enter].
3Press S or T to select Copy 
mode or Fax mode and press 
[Enter].
4Press [Reset]. The Copier Basic...

System Settings 
3-24 ADVANCED OPERATION GUIDE
Date and Time
Use to register the current date and time, the time difference from 
Greenwich Mean Time (GMT), and the summer time setting.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Date/Time 
and press [Enter].
3Press S or T to select Time 
Zone.
Press < or > key to set the time 
difference from Greenwich Mean 
Time.
4Press S or T to select Time.
Press the < key or the > key to set...

System Settings 
ADVANCED OPERATION GUIDE 3-25
Display Contrast Adjustment
Use to adjust the Display Contrast if required.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Display 
Contrast and press [Enter].
3Press < or > to adjust the contrast. 
Move left to darken the contrast, 
or right to lightens the contrast 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Administrator Management Code Change
You can change...

System Settings 
3-26 ADVANCED OPERATION GUIDE
Auto Sleep
Use to set the machine to enter sleep mode automatically when a preset 
period of time of non-use elapses.
NOTE: This setting is displayed only on the inch specification machine.
If the Auto Sleep function causes inconvenience, it is recommended to try 
a longer time period before disabling the function. If you disable this 
function, it is not displayed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page...

System Settings 
ADVANCED OPERATION GUIDE 3-27
Auto Clear Time
Use to set the time that elapses from completion of copying to activation of 
the Auto Clear function, if it is enabled.
Time that can be set: 10 to 270 seconds (in 10 second increments)
NOTE: This item is not displayed if the Auto Clear function is Off.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Auto Clear 
Time and press [Enter].
3Press < or > to select the time...

System Settings 
3-28 ADVANCED OPERATION GUIDE
Viewing and Printing the Total Counter
You can view the total counts on the Operation Panel and print a counter 
report.
Viewing the Total Counter
NOTE: You can view the Output Counter and the Scanning Counter.
1Press [System Menu / Counter].
2Press S or T to select Counter 
check and press [Enter].
3Press S or T to select Output 
count or Scan count and press 
[Enter].
4Press S or T to view the counter.
5When you have finished viewing the counters, press S...