Kyocera KM 1650 User Manual

System Settings 
ADVANCED OPERATION GUIDE 3-9
Exposure Adjustment for Text + Photo Originals
Adjusts the density of the central value in Manual Exposure mode for Text 
+ Photo originals.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Txt+Photo 
Dens and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Exposure...

System Settings 
3-10 ADVANCED OPERATION GUIDE
Exposure Adjustment for Photo Originals
Adjusts the density of the central value in Manual Exposure mode for 
Photo originals.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Photo Ori 
Dnsity and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Sort Copying
If the...

System Settings 
ADVANCED OPERATION GUIDE 3-11
Offset Copying
Use to set Offset Copy mode as the default setting.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Offset and 
press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Rotation Copy
Use to select Auto Rotation Copy mode as the default setting.
1Display the Copy Default screen, refer to Access the Copy Default...

System Settings 
3-12 ADVANCED OPERATION GUIDE
3Press S or T to select the default 
margin width. You can select from 
1/8 to 3/4 in 1/8 increments [1 
mm to 18 mm in 1 mm 
increments] and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Border Erase Width Default Value
Use to set the default value for the Border Erase Width.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Border 
Erase Width and press [Enter].
3Press S or T...

System Settings 
ADVANCED OPERATION GUIDE 3-13
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image) 
appear on copies from the optional Document Processor, you can make 
black streaking less noticeable. Black Streaking Reduction processing 
reduces the reproducibility of fine characters, therefore it is recommended 
to use the factory default setting.
To use the Black Streaking Reduction processing, first select Weak. If 
black streaking is not...

System Settings 
3-14 ADVANCED OPERATION GUIDE
Machine Default Settings
The machine enters Initial Mode after warm-up or if Reset is pressed. The 
options and settings which the machine returns to in Initial Mode are the 
default settings.
Use these instructions to customize the default settings to meet your 
requirements.
The following settings are available:
• Auto Cassette Switching
• Paper Size (cassettes 1 to 4)
• Paper Type (cassettes 1 to 4)
• Multi-Bypass Tray Confirmation Display
• Paper Weight...

System Settings 
ADVANCED OPERATION GUIDE 3-15
Access the Machine Default Screen
Use the following procedure to access the Machine Default screen.
1Press [System Menu / Counter].
2Press S or T to select Machine 
default and press [Enter].
3Use the keypad to enter the 4 digit 
management code. 
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For further information 
refer to...

System Settings 
3-16 ADVANCED OPERATION GUIDE
Auto Cassette Switching
If multiple cassettes contain the same size paper and the paper in one 
cassette runs out during copying, the Automatic Cassette Switching 
function will switch paper feed from the empty cassette to another cassette 
containing paper of the same size and orientation.
To prohibit switching to a cassette that has a different paper type, select 
On/Only Same Paper Type.
NOTE: To use this function on the 16 ppm model, the Optional Paper...

System Settings 
ADVANCED OPERATION GUIDE 3-17
4Press [Reset]. The Copier Basic screen returns.
Paper Type (cassettes 1 to 4)
Use to set the paper types for cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough, 
Letterhead, Color, Prepunched, High quality and Custom 1 to 8.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the 
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4 
are included in the optional Paper Feeder. This setting is...

System Settings 
3-18 ADVANCED OPERATION GUIDE
Paper Weight for Paper Type
Use to set the Paper Weight for each Paper Type.
Paper weight types that can be set: Super-Heavy, Heavy3, Heavy2, 
Heavy1, Middle3, Middle2, Middle1 and Light.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select P.type 
(Weight) and press [Enter].
3Press S or T to select the paper 
type and press [Enter].
4Press S or T to select the paper 
weight and press...