Kyocera KM 1635 User Manual

Copying Functions 
OPERATION GUIDE4-21
Saving on toner use
Setting EcoPrint will result in a reduced amount of toner being consumed.
Use this to make test copies or copies where high-quality printing is not 
required. Refer to EcoPrint on page 5-10 for instructions on how to select 
or deselect EcoPrint in the System Menu.
The image will become slightly 
lighter.
1Set the original.
2Press [EcoPrint].
3Press [Start]. The copier will begin copying.
EcoPrint
Not SetEcoPrint
Set
Downloaded From...

Copying Functions 
4-22OPERATION GUIDE
 Program Function
Copy settings that are frequently used can be registered and then recalled 
by pressing [Program]. Even types of copies can be stored.
Registering a program
1Set the Copy Mode to be registered.
2Press [Program] for 3 seconds.
3Input the program number (0 to 9) using the numeric keys and press the 
[Program] key for 3 seconds.
The display of the number input will blink 2 times and the program will be 
registered.
NOTE: If the same number as a...

System Setting 
OPERATION GUIDE5-1
5 System Setting
This chapter covers how to configure various settings of the 
copier using the menus on the operation panel.
• System Menu ............................................................... 5-2
• System Menu Items...................................................... 5-2
• System Menu Operations Procedures ......................... 5-2
• Procedure for Changing the Default Settings ............... 5-8
• Checking the Total Counter...

System Setting 
5-2OPERATION GUIDE
System Menu
The copier will enter System Menu after warm up has been completed or 
when [Reset] has been pressed. The settings automatically set for the 
copier in System Menu are called the Default Settings. These settings can 
be freely changed to match the usage of the copier.
System Menu Items
The following are the System Menu Items.
Change the settings as necessary in order to achieve the most efficient use 
of the copier. The factory default setting is indicated...

System Setting 
OPERATION GUIDE5-3
10.Text Density Adjusts the central exposure value for the copier’s 
manual exposure (Text).1(lightest) to 7(darkest) 
(*4)5-12
11.ReduceStreaks It is possible to make black streaking less noticeable 
when it appears when using the optional Document 
Processor.Off*
Weak
St ro n g5-12
12.OptimizePhoto Setting this to Error Diffusion when copying originals 
with text and photos and Dithering when copying 
originals with mainly photos will result in clearer...

System Setting 
5-4OPERATION GUIDE
19.Cassette1Size Automatically detects the paper size in the supply 
cassettes (1 to 4).
When it is to be detected in inches, set this to 
AutoDetect inch; when paper size is to be detected in 
centimeters, (A⋅B columns) set this to Auto Detect 
mm and when Oficio 2 size is to be used set this to 
Oficio 2.
Cassettes 2, 3 and 4 will be displayed only when the 
optional Paper Feeder is installed.Auto Detect mm 
(*Metric specifications)
AutoDetect inch (*Inch...

System Setting 
OPERATION GUIDE5-5
24.Custom Size 1 Sets the size to be set to the Custom size (1 to 2).
This makes it possible to set the size that do not 
appear on the operation panel.[Inch specifications]
A3 R
A4 R
A4
A5 R
B4 R
B5R
B5
B6 R
A6 R
Hagaki
11 × 15 R
Folio R
Oficio 2
Customized Size
  YYY × XXX (mm)
  Y-direction: 98 to 297mm
  X-direction: 148 to 432mm
[Metric specifications]
B5 R
B6 R*
A6 R
Cardstock
Ledgr R
Legal R
Letter R
Letter
Statement R
Oficio 2
11 × 15 R
Customied Size
  YYY ×...

System Setting 
5-6OPERATION GUIDE
38.Hagaki/A6RDet Select the paper size when copying an original 
document of non-standard size.Hagaki
A6 R*5-18
39.B4R/Folio Det Select the paper size when copying an original 
document of non-standard size.B4 R
Folio R*5-18
40.11x15 Detect When the size of original document is 11 x 15, the 
original document is automatically zoomed.On
Off*5-18
41.Copy Limit Limits the number of copies or sets of copies that can 
be made at one time.1 to 999 (*999) 5-19
42.Duplex 2nd...

System Setting 
OPERATION GUIDE5-7
System Menu Operations Procedures
Follow the procedure listed below to operate in the System Menu.
1Press [Exposure Adjustment] on both 
sides for 3 seconds. System Menu will be 
displayed.
2Press U or V and select System Menu Items.
NOTE: Each of System Menu Items can be selected by pressing the 
numeric keys.
Refer to Procedure for Changing the Default Settings regarding the 
following.
3After completing each operation, press U or V to display 00.Setting 
done....

System Setting 
5-8OPERATION GUIDE
NOTE: The message display will return to the Ready to copy. by  
pressing [Reset].
You can cancel the setting by pressing [Stop/Clear].
4Press [OK].
Procedure for Changing the Default Settings
The procedure for changing each of the items in the System Menu is 
described below.
User Status Report
Outputs a list of the values set for the System Menu items.
NOTE: Check to make sure that Letter/A4 size paper is loaded in the 
cassette.
1Display the System Menu. (Refer to...