Kyocera FS C8500DN User Manual

							Machine Parts 1-1
1 Machine Parts
This chapter provides explanations and illustrations for you to 
determine the parts and their functions. Try to be familiar with 
the names and functions of these parts for correct use and 
optimal performance.
This chapter contains explanations on the following topics:
Components at the Front of the Printer 1-2
Components at the Left of the Printer 1-2
Components at the Right of the Printer 1-3
Internal Components 1-4
Operation Panel 1-5
Downloaded From ManualsPrinter.com Manuals 
						

							1-2Machine Parts 
Components at the Front of the Printer
1 Operation Panel
2USB Memory Slot
3 Front Cover
4 Paper Cassette 1
5 Paper Cassette 2
6 Top Cover
7Top Tray
8 Paper Stopper
Components at the Left of the Printer
9 Left Cover 1
10 Left Cover 1 Indicator
11 Left Cover 1 Lever
12 Left Cover 2 Indicator
13 Left Cover 2
14 Left Cover 3
15 Handles
5 1
2
3
48 6
7
9
1011
12
13
14
15
Downloaded From ManualsPrinter.com Manuals 
						

							Machine Parts 1-3
Components at the Right of the Printer
16 USB Port (A2)
17 Network Interface Connector
18 USB Interface Connector (B1)
19 Power Switch
20 Multi Purpose Tray
21 Paper Width Guide
22 Handles
1617
18
19 21
20
22
Downloaded From ManualsPrinter.com Manuals 
						

							1-4Machine Parts 
Internal Components
23 Black Toner Container (K)
24 Black Toner Container (K) Release Lever
25 Yellow Toner Container (Y)
26 Yellow Toner Container (Y) Release Lever
27 Cyan Toner Container (C)
28 Cyan Toner Container (C) Release Lever
29 Magenta Toner Container (M)
30 Magenta Toner Container (M) Release Lever
31 Cleaning Brush
32 Waste Toner Box
33 Waste Toner Tray
34 Release button
35 Paper Feed Unit Cover
36 Paper Feed Unit
37 Green Knob
38 Paper Width Adjusting Tab
39 Paper Length Guide
3123 24 26 28 3025 27 29
32
33 34
38
39
3736
35
Downloaded From ManualsPrinter.com Manuals 
						

							Machine Parts 1-5
Operation Panel
40 Ready Indicator
41 Data Indicator
42 Attention Indicator
43 Message Display
44 [Left Select] Key
45 [Right Select] Key
46 [MENU] Key
47 [Back] Key
48 [Stop] Key
49 [OK] Key
50 USB Memory Slot
51 Arrow Keys
51
4041 42
50
43
44
45
46
4748
49
Downloaded From ManualsPrinter.com Manuals 
						

							1-6Machine Parts 
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-1
2 Printing Operation
This chapter contains explanations on the following topics:
Changing Network Interface Parameters 2-2
Printing a Status Page 2-3
Installing the Printer Driver 2-4
Printing from Application Software 2-9
Status Monitor 2-10
Uninstalling Software (Windows PC) 2-13
Downloaded From ManualsPrinter.com Manuals 
						

							2-2Printing Operation 
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP, 
SSL Server and the IPSec protocols and Security Level. 
The table below shows the items required for each of the settings. 
Configure the printers network parameters as appropriate for your PC 
and your network environment. 
For details of the procedure, refer to the Using the Operation Panel on 
page 4-1.
MenuSubmenuSetting
Network TCP/IP Set. TCP/IP On/Off
IPv4 
SettingDHCP On/Off
Auto-IP On/Off
IP Address IP address
Subnet Mask IP address
Default 
GatewayIP address
Bonjour On/Off
IPv6 
SettingTCP/IP(IPv6) On/Off
RA(Sateless) On/Off
DHCPv6 On/Off
Security Network Security Netware Off/On
Frame type
AppleTalk On/Off
IPP On/Off
SSL 
SettingSSL On/Off
IPP over SSL On/Off
HTTPS On/Off
IPSec On/Off
Note  After all network related settings have been done, turn the 
machine OFF and ON again. This is mandatory to make the 
settings effective!
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-3
Printing a Status Page
After completing the network settings, print a status page. The status 
page allows you to confirm a range of information, including network 
addresses and network protocols. 
To print a status page, select Status Page from the Report Print menu. 
Refer to Report Print on page 4-11 for detailed information.
Downloaded From ManualsPrinter.com Manuals 
						

							2-4Printing Operation 
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing 
the printer driver from the CD-ROM.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps 
to install the printer driver. The example shows you how to connect your 
printer to a Windows Vista PC.
You can use either Express Mode or Custom Mode to install the software. 
Express Mode automatically detects connected printers and installs the 
required software. Use Custom Mode if you want to specify the printer 
port and select the software to be installed.
1Turn on the computer and start up Windows.
If the Welcome to the Found New Hardware Wizard dialog box 
displays, select Cancel.
2Insert the CD-ROM supplied with the printer into the optical drive of 
the PC. In Windows 7, Windows Server 2008 and Windows Vista, the 
user account management window appears. Click Allow.
The installation program launches.
3Click View License Agreement and read the License Agreement. 
Click Accept.
4Click Install software.
The software install wizard starts up.
From this point, the procedure differs depending on your version of 
Windows and your connection method. Proceed to the correct 
procedure for your connection type.
• Express Mode
• Custom Mode 
Note  In Windows 7, Windows Server 2008, Windows Vista, 
Windows Server 2003, Windows XP and Windows 2000, you 
must be logged on with administrator privileges.
Note  If the software install wizard does not launch 
automatically, open the CD-ROM window in Windows 
Explorer and double-click Setup.exe.
Downloaded From ManualsPrinter.com Manuals