Konica Minolta magicolor 5670EN User Manual

Loading Media 127
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the media face down in the 
tray.
Up to 20 sheets can be 
loaded into the tray at 
one time.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 128
5Slide the media guides against 
the edges of the media.
6Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 39.
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver Tray1 (Manual Feed), it is not necessary to 
change the configuration menu setting.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 129
Loading Banner Paper
Paper up to 1200 mm long can be loaded into the bypass tray and printed 
one at a time.
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 130
4With the side of the banner 
paper to be printed on facing 
down, insert the end of the paper 
as much as possible into the 
feed slot.
One sheet of banner 
paper can be loaded into 
the tray at one time.
In order to avoid toner 
smudges, do not load 
curled paper.
5Slide the media guides against 
the edges of the banner paper.
6Raise the bypass tray, and 
secure the banner paper. 
Return the bypass tray to its 
original position.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 131
7Secure the banner paper with 
the left and right media guides.
When printing multiple 
copies on banner paper, 
repeat the procedure 
starting from step 2.
8Select Tray 1(Manual Feed) from the Paper Source list and specify a cus-
tom size in the Original Size list of the printer driver, and then print.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 132
Tray 2 (500 sheet tray)
Loading Plain Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 133
3Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 500 sheets 
(80 g/m2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
4Close Tray 2.
5Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 39.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 134
Tray 2 (250 sheet tray)
Loading Plain Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them. 
Downloaded From ManualsPrinter.com Manuals 

Loading Media 135
4Load the paper face up in the 
tray. 
Do not load above the  
mark. Up to 250 sheets 
(80 g/m
2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time. 
5Slide the media guides against 
the edges of the paper. 
Downloaded From ManualsPrinter.com Manuals 

Loading Media 136
6Close Tray 2.
7Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 39.
Other Media
When loading media other than plain paper, set the media mode (Envelope, 
Label, Letterhead, Thick 1, Thick 2, Glossy 1, Glossy 2, or Transparency) in 
the driver for optimum print quality.
Loading Envelopes
1Pull the lever, and then open the 
right side...