Konica Minolta magicolor 5670EN User Manual

Configuration Menu Overview 77
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
IP 
ADDRESSSetting000.000.000.000
Set the IP address for this printer on the 
network.
Use the  ,  ,  , and   keys to 
specify the value.
If the IP address is manually specified, 
DHCP, BOOTP and...

Configuration Menu Overview 78
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is...

Configuration Menu Overview 79
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, Dynamic 
DNS is enabled.
If 
NO is selected, Dynamic 
DNS is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, Raw Port 
is enabled.
If 
NO is selected, Raw Port is 
disabled.
BIDI-
REC-
TIONALSettingsON/OFF
If ON is selected, Raw port 
transmissions are enabled.
If 
OFF is selected, Raw port 
transmissions are...

Configuration Menu Overview 80
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD print 
is enabled.
If 
NO is selected, WSD print is 
disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPsec is 
enabled.
If 
NO is selected, IPsec is dis-
abled.
IP 
ADDRESS 
FILTERACCESS 
PER-
MIS-
SIONSettingsENABLE/
DISABLED
Select whether to enable or 
disable access granting.
If 
ENABLE is selected, 
access granting is enabled.
If 
DISABLE is selected, 
access granting is disabled.
ACCESS...

Configuration Menu Overview 81
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, auto 
configuration of IPv6 is 
enabled.
If 
NO is selected, auto config-
uration of IPv6 is disabled.
LINK 
LOCALDisplays the Link-Local 
address.
GLOBAL
ADDRESSDisplays the global address.
GATE-
WAY 
ADDRESSDisplays the gateway 
address.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is enabled.
If 
NO is selected, NetWare is disabled.
APPLE
TALKENABLESettingsYES/NO
If YES is selected, AppleTalk is enabled.
If...

Configuration Menu Overview 82
CAMERA 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable camera direct printing.
If 
ENABLE is selected, camera direct printing is enabled.
If 
DISABLE is selected, camera direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 83 SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE...

Configuration Menu Overview 84
LCD 
CONTRAST
SECURITYCHANGE 
PASSWORD
LOCK PANEL
CLOCKDATE 
(xx.xx.xx)
TIME
HDD FORMAT*USER AREA 
ONLY
ALL
RESTORE 
DEFAULTSRESTORE 
NETWORK
RESTORE 
PRINTER
RESTORE ALL
ENERGY 
SAVER TIME**
MENU 
TIMEOUT
ENERGY 
SAVER
TIME ZONE
HOLD JOB 
TIMEOUT*
CARD FOR-
MAT***USER AREA 
ONLY
ALL
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 85
* These menu items appear only if an optional hard disk kit is installed.
** This menu item appears when you select 
ON from the ENERGY 
SAVER
 menu.
*** This menu item appears only if an optional CompactFlash card is 
installed.
**** These menu items appear only if corresponding optional lower 
feeder unit is installed.
***** This menu item appears only if an optional hard disk kit or a 
CompactFlash card is installed.
ENABLE 
WARNINGPAPER EMPTYTRAY1
TRAY2
TRAY3****...

Configuration Menu Overview 86
All factory default values are shown in bold.
LAN-
GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/
POLISH
The display language of the message window can be changed 
to the selected language.
The language selections appear in the message window in the 
corresponding language. For example, 
GERMAN appears as 
DEUTSCH.
EMULA-
TIONDEF. 
EMULA-
TIONSettingsAUTO/POSTSCRIPT/PCL
Specify...