Konica Minolta magicolor 5670EN User Manual

Media Types 117
DO NOT use transparencies that
„Have static electricity that will cause them to stick together
„Are specified for inkjet printers only
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that 
the image does not shift. 
DO NOT use glossy media stock that is
„Mixed with any other media (as this will cause printer misfeeding) Capacity Tray 1 
(Manual Feed 
Tray)Up to 20 glossy media sheets, depending on 
their thickness.
Tray 2500 sheet tray: Not supported
250...

Media Types 118
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is 
up to 4 mm (0.157) from the edges of 
the media.
Each media size has a specific image-
able area, the maximum area on which 
the printer can print clearly and without 
distortion. 
This area is subject to both hardware 
limits (the physical media size and the 
margins required by the printer) and 
software constraints (the amount of 
memory available for the full-page frame buffer). The guaranteed...

Loading Media 119
Loading Media 
How do I load media?
Take off the top and bottom sheets of a 
ream of paper. Holding a stack of approx-
imately 100 sheets at a time, fan the 
stack to prevent static buildup before 
inserting it in a tray.
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of 
media types, it is not intended to print exclusively on a single media 
type except plain paper. Continuous printing on media other than plain 
paper (such as...

Loading Media 120
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the paper face down in the 
tray.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 121
Do not load paper above 
the line. Up to 100 sheets 
(80 g/m
2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
6Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 39.
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver...

Loading Media 122
Loading Envelopes
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Open the door at the side of the 
right side cover.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 123
3Turn the two dials on the fuser 
unit to the setting for envelopes.
4Close the door at the side of the 
right side cover.
Plain paper Envelope
Downloaded From ManualsPrinter.com Manuals 

Loading Media 124
5Close the right side cover.
6Open Tray 1.
7Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 125
8Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
9Load the envelopes flap side up 
in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the 
flap along...

Loading Media 126
10Slide the media guides against 
the edges of the envelopes.
Before printing on plain 
paper, be sure to return 
the dials on the fuser unit 
to the setting for plain 
paper.
11Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 39.
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver Tray1 (Manual...