Konica Minolta magicolor 5670EN User Manual

Configuration Menu Overview 87
PCL CR/LF 
MAP-
PINGSettingsCR=CR LF=LF/CR=CRLF 
LF=LF/CR=CR 
LF=LFCR/CR=CRLF 
LF=LFCR
Select the definitions of the CR/LF codes 
in the PCL language.
LINES 
PER 
PAGESettings5-60-128
Specify the number of lines per page in the 
PCL language.
FONT 
SOURCEFONT 
NUMBERSettings0-102
Specify the default font in the 
PCL language.
The font numbers that appear 
correspond to the PCL font list. 
For details on printing the font 
list, refer to “PRINT MENU” on 
page 37.
PITCH...

Configuration Menu Overview 88
XPS DIGI-
TAL
SIGNA-
TURESettingsENABLE/DISABLE
Select whether to enable or disable XPS 
digital signatures.
If 
ENABLE is selected, XPS digital 
signatures are enabled.
If 
DISABLE is selected, XPS digital 
signatures are disabled.
XPS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error report is 
printed after an XPS error has occurred.
If 
ON is selected, the error report is printed.
If 
OFF is selected, the error report is not 
printed.
PAPER DEFAULT 
PAPERPAPER...

Configuration Menu Overview 89
CUSTOM 
SIZESpecify the media size when PAPER 
SIZE
 is set to CUSTOM.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm...

Configuration Menu Overview 90
PAPER 
TYPESettingsPLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally 
used.
UNIT 
OF 
MEA-
SURESettingsINCHES/MILLIMETERS
The units for specifying the size of custom media can 
be switched between inches and millimeters.
The default setting for North America is 
INCHES. The default setting for all other 
regions is 
MILLIMETERS.
GRAY 
SCALE 
PAGESettingsAUTO/GRAYSCALE...

Configuration Menu Overview 91
AUTO 
CON-
TINUESettingsON/OFF
Select whether or not printing continues if the size or type of 
media in the selected tray is different from the size or type of 
media for the print job.
If 
AUTO CONTINUE is set to ON, printing automatically contin-
ues after about 10 seconds under the following conditions. At 
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 243)/TRAY EMPTY (Page 
245)
Different media size/type: PAPER...

Configuration Menu Overview 92
LCD 
CON-
TRASTSettings-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is 
-3 and the brightest level setting is 
+3.
SECU-
RITYCHANGE 
PASS-
WORDSpecify the password for locking the control panel.
If the password is set to 
0000 (default), the control 
panel is not locked. In order to lock the control panel, 
be sure to specify a password other than 
0000.
LOCK 
PANELSettingsOFF/MINIMUM/ON
Specify how the control panel is locked.
If...

Configuration Menu Overview 93
CARD 
FORMATUSER 
AREA 
ONLYInitialize the user area of the CompactFlash card. 
When this menu item is selected, the printer is 
automatically restarted.
ALLInitialize the CompactFlash card. When this menu 
item is selected, the printer is automatically restarted.
RESTORE 
DEFAULTSRESTORE 
NETWORKReset the network settings to their defaults. When 
this menu item is selected, the printer is 
automatically restarted.
RESTORE 
PRINTERReset the printer settings to their...

Configuration Menu Overview 94
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
ALIGNMENTTOP 
ADJUSTMENTPLAIN PAPER
THICK
TRANSFER 
POWERSIMPLEX PASS
MAINTENANCE MENU
PRINT MENUEVENT LOG
HALFTONE 64CYAN 64/MAGENTA 64/
YELLOW 64/BLACK 64
CYAN 128/MAGENTA 128/
YELLOW 128/BLACK 128
CYAN 256/MAGENTA 256/
YELLOW 256/BLACK 256
HALFTONE 128
HALFTONE 256
GRADATION
ENVELOPE
TRANSPARENCY
LEFT 
ADJUSTMENTLEFT ADJ...

Configuration Menu Overview 95
IMG ADJ
THICKCYAN
MAGENTA
DUPLEX PASS
YELLOW
BLACK
PLAIN PAPER
THICK 1
POSTCARD
THICK 2
IMG ADJ
BLACK
LABEL
GLOSSY 1
GLOSSY 2
MANUAL 
DUPLEXPLAIN PAPER
LABEL
GLOSSY 2
GLOSSY 1
ENVELOPE
SUPPLIESREPLACETRANS. BELT
TRANS. 
ROLLER
FUSER UNIT
ENVELOPE
QUICK SET-
TING*UPDATE SET-
TING
BACKUP SET-
TING
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 96
*This menu item appears when a USB memory device is plugged into 
the KONICA MINOLTA Digital Camera Direct Port.
All factory default values are shown in bold.
PRINT 
MENUEVENT 
LOGSettingsPRINT/CANCEL
Prints the event log.
HALF-
TONE 
64CYAN/
MAGENTA/
YELLOW/
BLACK 
64
SettingsPRINT/CANCEL
Print cyan/magenta/yellow/black half-
tones at 64 gradations.
HALF-
TONE 
128CYAN/
MAGENTA/
YELLOW/
BLACK 
128
SettingsPRINT/CANCEL
Print cyan/magenta/yellow/black half-
tones at 128...