Konica Minolta magicolor 5670EN User Manual

Configuration Menu Overview 37 PRINT MENU
With this menu, printer information, such as the configuration page and the 
demo page can be printed.
* This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
All factory default values are shown in bold.
CONFIGURA-
TION PGSettingsPRINT/CANCEL
Prints the configuration page.
DEMO PAGESettingsPRINT/CANCEL
Prints the demo page.
STATISTICS 
PAGESettingsPRINT/CANCEL
Prints the statistics page such as the number of pages...

Configuration Menu Overview 38
FONT LIST POST
SCRIPTSettingsPRINT/CANCEL
Prints the PostScript font list.
PCLSettingsPRINT/CANCEL
Prints the PCL font list.
MENU MAPSettingsPRINT/CANCEL
Prints the menu map.
DIRECTORY 
LISTSettingsPRINT/CANCEL
Prints the directory list of the hard disk kit or a 
CompactFlash card.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 39 PAPER MENU
With this menu, the paper used for printing can be managed.
DEFAULT TRAY
TRAY1PAPER SIZE
CUSTOM SIZE*
TRAY2
PAPER TYPE
FINISHING*****
TRAY3**
TRAY4**
PAPER SOURCE
COLLATE****
DUPLEX***
COPIES
PAPER TYPE
PAPER SIZE
PAPER TYPE
PAPER SIZE
PAPER MENU
TRAY 
CHAINING
TRAY MAPPING
LOGICAL 
TRAY0
TRAY MAPPING
MODE
LOGICAL 
TRAY9
IMAGE 
ROTATION******
JOB 
SEPARATION*****
WIDTH
LENGTH
PAPER SIZE
CUSTOM 
SIZE*******
PAPER TYPE
WIDTH
LENGTH
SIZE 
SETTING********
Downloaded...

Configuration Menu Overview 40
* This menu item appears only when you select CUSTOM from the 
TRAY 1/PAPER SIZE menu.
** These menu items appear only if one or both of the optional lower 
feeder units are installed.
*** This menu item appears only if the optional duplex unit (Duplex 
Option) is installed.
**** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card of 1 GB or more is installed.
***** This menu item appears only if the optional staple finisher is 
installed....

Configuration Menu Overview 41
All factory default values are shown in bold.
PAPER 
SOURCEDEFAULT 
TRAYSettingsTRAY1/TRAY2/
TRAY3/TRAY4
The Lower Feeder Unit that is normally used can be 
specified.
TRAY 3 and TRAY 4 appear only if the 
optional lower feeder units are installed.
TRAY1 PAPER 
SIZESettingsANY/LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK 
QUARTO/FOOLSCAP/GOVT 
LEGAL/16K/PHOTO 4×6/
KAI 16/KAI 32/ENV C5/
ENV C6/ENV DL/ENV 
MONARCH/ENV CHOU#3/...

Configuration Menu Overview 42
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 1.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 43
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the setting for the type of paper 
loaded into Tray 1.
TRAY2
(500 
sheet 
tray)PAPER 
SIZESettingsLETTER/A4
Select the setting for the size of paper 
loaded into Tray 2.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions are 
A4.
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED
Select the setting...

Configuration Menu Overview 44
TRAY2
(250 
sheet 
tray)PAPER 
SIZESettingsANY/LETTER/EXECUTIVE/
A4/A5/A6/B5(JIS)/
B6(JIS)/GOVT LETTER/
STATEMENT/UK QUARTO/
16K/PHOTO 4×6/KAI 16/
KAI 32/ENV C5/ENV C6/
ENV DL/ENV MONARCH/
ENV CHOU#3/ENV 
CHOU#4/B5(ISO)/ENV 
#10/ENV YOU#4/JPOST/
JPOST-D/CUSTOM
Select the setting for the size of paper 
loaded into Tray 2.
If USER SELECT is selected from 
the 
PAPER MENU/PAPER 
SOURCE/TRAY 2/SIZE 
SETTING
 menu, a user can select 
the paper size.
If 
AUTO is selected from...

Configuration Menu Overview 45
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 2.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 46
PAPER 
TYPESettingANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/ 
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the setting for the type of paper 
loaded into Tray 2.
SIZE 
SETTINGSettingAUTO/USER SELECT
If AUTO is selected, the printer automati-
cally detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size.
TRAY3
TRAY4PAPER 
SIZEThe size of paper loaded in Tray 3 and 
Tray 4 is indicated. For media sizes that 
can...