Konica Minolta magicolor 4695MF User Manual
Here you can view all the pages of manual Konica Minolta magicolor 4695MF User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
About the Control Panel 27 3TIMER TXSelect this menu item to specify the time when the fax is to be sent. For details, refer to the Facsimile User’s Guide on the Documentation CD/DVD. 4 Transmission modeIndicates the fax transmission mode that is selected. For details on selecting the transmission mode, refer to the Facsimile User’s Guide on the Documentation CD/DVD. 5 Single-sided/ double-sided faxingIndicates the fax document scanning method (sin- gle-sided/double-sided) that is selected. For...
Page 42
About the Control Panel 28 Print Screen When a print job is received, PRINTER: Printing appears in the status section of the main screen. To display the print screen (as shown below), press the * key while PRINTER: Printing is displayed. To cancel printing, press the Stop/Reset key when the print screen appears. Press the Select key to select YES. No. Indication Description 1 Status Displays messages indicating operations such as printing. 2 Media tray/ media sizeIndicates the media tray and media...
Page 43
Checking the Machine Status and Settings 29 Checking the Machine Status and Settings TONER REMAINING With the main screen displayed, press the * key to display the TONER REMAINING screen. From this screen, a general estimate of the amount of toner remaining in the toner cartridges can be viewed. To return to the main screen, press the Back key. If the Select key is held down for at least 2 seconds while the screen described above is displayed, the configuration page will be printed. REPORT/STATUS...
Page 44
Checking the Machine Status and Settings 30 TOTAL PRINT The total number of pages for each of the following can be checked. SUPPLY STATUS The remaining amount of toner in the toner cartridges and the remaining ser- vice life of the imaging units can be displayed as a percentage. TOTAL PRINTThis counter shows the total number of pages printed. MONO COPYThis counter shows the total number of pages copied in black-and-white. COLOR COPYThis counter shows the total number of pages copied in color. MONO...
Page 45
Checking the Machine Status and Settings 31 TX/RX RESULT For details, refer to the Facsimile User’s Guide on the Documentation CD/ DVD. REPORT The machine settings, lists and reports related to fax can be printed. TX RESULT REPORTPrints the results of fax transmissions. For details, refer to the Facsimile User’s Guide on the Documentation CD/DVD. RX RESULT REPORTPrints the results of fax receptions. For details, refer to the Facsimile User’s Guide on the Doc- umentation CD/DVD. ACTIVITY REPORTPrints...
Page 46
Checking the Machine Status and Settings 32 PCL FONT LISTPrints the PCL font list. DIRECTORY LISTPrints the directory list of the hard disk or a CompactFlash card. Downloaded From ManualsPrinter.com Manuals
Page 47
Configuration Menu Overview 33 Configuration Menu Overview To display the settings menu for this machine, select UTILITY in the main screen, and then press the Select key. From the UTILITY menu, settings for the various machine functions can be changed. In addition, Copy mode settings can be specified for PS/PCL printing and memory direct printing. For details, refer to “PS/PCL PRINT Menu” on page 71 and “MEMORY PRINT Menu” on page 103. UTILITY Menu From this menu, various machine settings can be...
Page 48
Configuration Menu Overview 34 * This menu item appears when ADMIN. MANAGEMENT/CAMERA DIRECT is set to ENABLE. FAX RX OPERATION REPORTING SCAN SETTING DIRECT PRINT * Downloaded From ManualsPrinter.com Manuals
Page 49
Configuration Menu Overview 35 MACHINE SETTING Menu MACHINE SETTING AUTO PANEL RESET PREHEAT MODE ENERGY SAVE MODE LCD CONTRAST KEY SPEED TIME TO START INTERVAL LANGUAGE LAMP OFF TIME LAMP WARMUP TIME BUZZER VOLUME INITIAL MODE TONER EMPTY Downloaded From ManualsPrinter.com Manuals
Page 50
Configuration Menu Overview 36 Manufacturer’s default settings appear in bold. TONER NEAR EMPTY I-UNIT NEAR EMPTY AUTO CONTINUE CALIBRATION AUTO PANEL RESETSettingOFF / 30sec / 1min / 2min / 3min / 4min / 5min Specify the length of time until all settings that have not been programmed, such as the num- ber of copies, are cleared and return to their default settings when no operation is performed. To set the machine to perform the auto panel reset operation, select from 30sec, 1min, 2min, 3min, 4min...