Konica Minolta magicolor 4695MF User Manual

Configuration Menu Overview 67
SCAN SETTING Menu
RX RESULT 
REPORTSettingON / ON(ERROR) / OFF
Select whether the report showing the result of a 
reception is printed automatically after the reception is 
finished.
ON: Prints the report after each reception.
ON(ERROR): Prints the report after a reception only if 
an error occurred.
OFF: Does not print the report after each reception, 
even if an error has occurred.
SCAN SETTING RESOLUTION
IMAGE FORMAT
CODING METHOD
FILE SIZE
QUALITY PRIORITY
DENSITY...

Configuration Menu Overview 68
Manufacturer’s default settings appear in bold.
RESOLUTIONSetting150×150dpi / 300×300dpi / 
600×600dpi
Select the default scanning resolution for scan to 
E-mail operations.
When using the ADF to scan in color or 
grayscale, 
300×300dpi is automatically 
selected, even if the resolution was set to 
600×600dpi.
IMAGE FORMATSettingTIFF / PDF / JPEG
Select the default format for saving files with scan to 
E-mail operations.
PDF data can be opened in Adobe Acrobat 
Reader....

Configuration Menu Overview 69
DIRECT PRINT Menu
This menu item appears when UTILITY/ADMIN. MANAGEMENT/
CAMERA DIRECT
 is set to ENABLE.
Manufacturers default settings appear in bold.
FILE SIZESettingNO SPLIT / SPLIT
Select whether or not to limit the size for scan data 
sent as e-mail attachments.
If 
SPLIT is selected, specify the maximum size 
between 
1 and 10 Mb. If the data to be sent exceeds 
the maximum size allowed, the data is divided and 
sent as multiple attached files.
In order to receive...

Configuration Menu Overview 70
PAPER 
SIZETRAY1 
PAPERMedia 
typePLAIN PAPER / THICK PAPER / 
THICK PAPER2 / LABELS / POST-
CARD
 / GLOSSY / GLOSSY2
Paper 
sizeWhen a setting other than POST-
CARD 
is selected: LETTER / A4 / 
A5 / STATEMENT / B5
When POSTCARD is selected: LET-
TER
 / A4 / A5 / STATEMENT / B5 / 
J-POSTCARD 100×148
When GLOSSY or GLOSSY2 is 
selected:
 LETTER / A4 / A5 / 
STATEMENT / B5 / PHOTO SIZE 
4X6
 / PHOTO SIZE 10X15 / LTR 
2UP SPL
 / A4 4UP SPL / A4 2UP 
SPL
Select the media type...

PS/PCL PRINT Menu 71
PS/PCL PRINT Menu
To display the PS/PCL PRINT menu, select PS/PCL PRINT in the main 
screen (Copy mode), and then press the Select key. From this menu, jobs 
stored on the machines hard disk (optional) can be printed or deleted, and 
various PS/PCL printing settings can be changed.
The PS/PCL PRINT menu is structured as shown below.
To return to the previous screen in the PS/PCL PRINT menu, press the Back 
key. (If the Back key is pressed while settings are being specified, those...

PS/PCL PRINT Menu 72
If no jobs have been stored on the hard disk, the message NO STORED 
JOB
 appears when PROOF/PRINT MENU is selected.
PRINTFollow the procedure described below to print the 
selected job.
1. If a password has been specified for the 
selected job, type in the password, and then 
press the Select key.
2. Specify the number of copies (1 to 9999), 
and then press the Select key.
3. To print color copies, press the Start-Color 
key. To print monochrome copies, press the 
Start-B&W key....

PS/PCL PRINT Menu 73
PAPER MENU
PAPER MENU ANY TRAY SET-
TINGTRAY1 PAPER TRAY1 ANY SIZE
TRAY1 ANY TYPE
TRAY2 PAPER TRAY2 ANY SIZE
TRAY2 ANY TYPE
TRAY3 PAPER
*1TRAY3 ANY TYPE
TRAY CHAINING
TRAY MAPPING TRAY MAPPING MD.
LOGICAL TRAY0
•
•
•
•
LOGICAL TRAY9
DUPLEX
COPIES
COLLATE
*2
Downloaded From ManualsPrinter.com Manuals 

PS/PCL PRINT Menu 74
*1 This menu item appears only if an optional lower feeder unit is installed.*2 This menu item appears only if an optional hard disk kit or a CompactFlash 
card of 1GB or more is installed.
Manufacturers default settings appear in bold.
ANY TRAY 
SETTINGTRAY1 
PAPERTRAY1 
ANY 
SIZESettingON / OFF
Select whether or not the Any Paper 
Size setting is selected for Tray 1.
TRAY1 
ANY 
TYPESettingON / OFF
Select whether or not the Any Media 
Type setting is selected for Tray 1.
TRAY2...

PS/PCL PRINT Menu 75
TRAY 
MAPPINGTRAY MAPPING 
MD.SettingON / OFF
Select whether or not the Tray Mapping 
function is used.
LOGICAL TRAY
0-9SettingPHYSICAL TRAY1 / 
PHYSICAL TRAY2 / 
PHYSICAL TRAY3
Select the tray that is used for printing 
when a print job is received from 
another manufacturers printer driver.
The default settings are 
PHYSICAL 
TRAY1
 for LOGICAL TRAY1 and 
PHYSICAL TRAY2 for other trays.
PHYSICAL TRAY3 appears 
only if an optional lower feeder 
unit is installed.
DUPLEXSettingOFF /...

PS/PCL PRINT Menu 76
QUALITY MENU
QUALITY 
MENUCOLOR MODE
BRIGHTNESS
HALFTONE IMAGE 
PRINTING
TEXT 
PRINTING
GRFX. 
PRINTING
EDGE 
ENHANCEMENTIMAGE 
PRINTING
TEXT 
PRINTING
GRFX. 
PRINTING
EDGE 
STRENGTH
ECONOMY 
PRINT
PCL SETTING CONTRAST
IMAGE 
PRINTINGRGB SOURCE
Downloaded From ManualsPrinter.com Manuals