Konica Minolta bizhub C652 User Manual

							bizhub C652/C652DS/C552/C552DS/C4525-5
5.1 Basic5
5.1.2 Paper
Select the paper type and size to be printed, or to change the paper size and paper type settings specified 
for each paper tray.
The paper size can be selected automatically according to the original size or it can be specified manually.
0If you select [Transparency], specify [Black] for [Color] in advance.
0The auto zoom setting and the auto paper setting cannot be selected at the same time.
0If a setting for special paper is selected for a paper tray, that tray is not selected automatically with the 
Auto Paper setting. (However, a paper tray set to Single Side Only is given priority to be selected with 
1-sided printing.) When setting special paper in the paper tray, be sure to set the paper type. For details 
on special paper, refer to page 12-2.
%Press [Basic] ö [Paper].
Settings
Auto Automatically selects the paper size according to the original size.
1-4 Trays Allows you to specify the paper manually.
#(Bypass Tray)
L Large capacity unit 
(Optional)
Change Tray Settings Specify the paper type and paper size for the selected paper tray.
Paper Type Specify the paper type for the selected paper tray.
Paper Size Specify the paper size for the selected paper tray.
[Auto Detect]:
Automatically detects the paper size.
[12-1/4e18 w] (Only for Tray 1 and Tray 2):
Enables 12-1/4e18 w to be selected.
[Standard Size] (only for Bypass Tray):
Specify a paper size to use the bypass tray as a 
paper tray dedicated to the paper size.
[Custom Size] (only for Bypass Tray):
Enter the paper size.
[Wide Paper]:
Select a paper size larger than the original.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-6
5.1 Basic5
Configuring a custom size
%[Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Custom Size].
Configuring wide paper
%[Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Wide Paper]. Settings
X/Y • North American model (inch): Configure the length [X] and width [Y] with 
pressing [+] or [-].
• European model (cm): Enter the length [X] and width [Y] of the paper.
Store Register custom paper sizes.
memory  1  to  5 Select the memory button where the paper size is 
to be stored.
Change Custom Size 
NameRename memory button names.
Settings
Wide Paper Select the size of the paper to be loaded.
Change Size X/Y Enter the length [X] and width [Y] of the paper.
Preset Paper Sizes Enables 12 e18 w to be selected.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-7
5.1 Basic5
5.1.3 Zoom
The original image size in the original can be enlarged or reduced.
0The auto zoom setting and the auto paper setting cannot be selected at the same time.
0If the auto zoom setting is selected and an enlargement is to be copied on paper larger than the original, 
load the original with the same orientation as the paper.
%Press [Basic] ö [Zoom].
dReference
To set image rotation:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Enlargement Rotation].
Settings
Auto Automatically selects the most appropriate zoom ratio based on the size of 
the loaded original and the specified paper size.
Full Size Copies the original image in the size identical to the original (100%).
Manual • Enter the zoom ratio (25.0% - 400.0%) of the copy.
• Under Set Individual Zoom, you can enter different zoom ratios for 
the X and Y directions.
Set Zoom Enter the desired zoom and select the button to 
register the value with.
User Preset Zoom indicates the registered 
zoom.
Minimal Copies an original image slightly smaller than the original size or the spec-
ified size. The image in the original is centered on the paper without any 
cutoff.
Select this setting when you want to copy the entire scope of the original 
within the paper used.
-/+ Configure the zoom ratio (25.0% - 400.0%) of the copy without changing 
the aspect ratio.
Fixed Zoom Select a preset zoom when copying from a fixed size original onto a fixed 
size paper.
User Preset Zoom Select a registered copy zoom value. To change the registered zoom val-
ues, use [Set Zoom].
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-8
5.1 Basic5
5.1.4 Duplex/Combine
Configure whether to scan one side or both sides of the originals and whether to print on one side or both 
sides of the paper. Multiple (2, 4 or 8) pages of original images can be reduced in size and printed on a single 
page.
Using the Duplex/Combine function, you can save paper sheets for copying.
%Press [Basic] ö [Duplex/Combine].
Settings
1-Sided > 1-Sided
2-Sided > 1-Sided
1-Sided > 2-Sided
2-Sided > 2-Sided
Binding Position Configure the binding position of the original and copies to be output.
Without setting the Binding Position, the resulting copy may not be what 
you intended.
When [1- Sided > 1- Sided] is selected, the binding position cannot be set.
Original Binding 
PositionSelect the original binding position from [Left-
Bind], [Right-Bind], [Top] and [Auto].
• If the binding position for the original is set to 
[Auto], the position of the binding margin is 
automatically selected. A binding margin 
along the long side of the paper is selected if 
the original length is 11-11/16 inch (297 mm) 
or less. If the original length is more than 11-
11/16 inch (297 mm), a binding margin along 
the short side of the paper is selected.
• If [Auto] is selected for the original binding po-
sition, the binding margin is set at the top or 
on the left.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-9
5.1 Basic5
Binding Position Output Binding Posi-
tionSelect the output binding position from [Left 
Bind], [Right Bind], [Top] and [Auto]. 
• If the binding position for the copy is set to 
[Auto], the binding position is automatically 
determined according to the orientation of the 
loaded original. If the original length is 11-
11/16 inch (297 mm) or less, a binding posi-
tion along the long side of the paper is select-
ed. If the original length is more than 11-11/16 
inch (297 mm), a binding position along the 
short side of the paper is selected.
• If Output Binding Position is set to [Auto], the 
binding position is set at the top or on the left.
Original Direction Select the orientation of the original loaded into the ADF or placed on the 
original glass.
Without setting original direction, the resulting copy may not be what you 
intended.
No Disables combined copy.
2in1 Copies images on two original pages on one sheet of paper.
Portrait original pages
Landscape original pages
4in1/8in1 4in1 Copies images of four original pages on one 
sheet of paper.


8in1 Copies images of eight original pages on one 
sheet of paper.


Horizontal Specify the combine order of the original (Num-
bering Direction setting).
Vertical Settings
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-10
5.1 Basic5
5.1.5 Finishing
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
0The Staple settings are available only if the optional finisher is installed.
0The Punch settings are available only if the Punch Kit PK-516 or Z Folding Unit is installed on the 
Finisher FS-526 or the Punch Kit PK-517 is installed on the Finisher FS-527.
0The Fold/Bind is available only if the Saddle Stitcher is installed on the optional Finisher.
0The Z-fold settings are available only if the Z Folding Unit is installed on the optional Finisher FS-526.
0Staple cannot be used together with Offset.
0The Half-Fold, Center Staple & Fold or Tri-Fold function cannot be used together with any of Offset, 
Staple or Punch.
%Press [Basic] ö [Finishing].
Settings
Sort Prints the copied sets separately when a multi-page original is copied. 
Group Makes multiple copies of each page when you make multiple copies of a multi-
page original.
111432
1
432111
1
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-11
5.1 Basic5
Offset Yes/No Specify whether to separate each set of copies from another set in the output 
tray when copying multiple sets of multi-page originals.
When the Finisher or Job Separator JS-504 is not installed:
If the following conditions are met, printed copies are fed out and sorted in an 
alternating crisscross pattern.
•8-1/2 e 11, A4 or B5 paper is used
• Paper of the same size and type is loaded with the w orientation in one pa-
per tray and with the v orientation in another tray
• Auto paper selection is specified for the paper size setting
When the Finisher or Job Separator JS-504 is installed:
The copies are fed out and stacked on top of each other with each set shifted 
to separate it.
Fold/Bind When the Saddle Stitcher SD-508 is installed on the Finisher FS-526:
Half Fold Center Staple & Fold Tri-Fold
Z-Fold
To configure the Z folding setting, install the Z Folding Unit ZU-606.
When the Saddle Stitcher SD-509 is installed on the Finisher FS-527:
Half Fold Center Staple & Fold
Staple Staples copies in corner or at two points before they are output.
Punch Punches holes in copies before they are output. Settings
1
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-12
5.1 Basic5
5.1.6 Post Inserter
When the Post Inserter PI-505 is installed on the Finisher FS-526, you can manually operate the Finisher 
FS-526 using the post inserter control panel.
Reference
-Only the lower tray can be used as the output tray. The upper tray is not available.
Keys on control panel
Position Setting Configure desired staple or hole-punch positions.
Select Auto, and the machine automatically judges the staple or punch posi-
tions for the paper relative to the original direction loaded.
• A staple or hole-punch position is set along the long side of the paper if the 
original length is 11-11/16 inch (297 mm) or less.
• Staple or hole-punch positions are set along the short side of the paper if 
the original length is more than 11-11/16 inch (297 mm).
• Staple or punching positions are set on the upper or left-side end.
• Be sure to load the original so that its top side is placed in the back.
• If desired, press [Original Direction], and then select the original direction. Settings
No. Name
1 Corner staple lamp
2  Center staple & fold lamp
3 [Finishing] key
4 2-hole lamp
5 3-hole lamp
6 [Select punch] key
7 [Start/stop] key
8 4-hole lamp
9 Tri-fold lamp
10  2 position staple lamp
7635421
8 9 10
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-13
5.1 Basic5
Finishing using Post Inserter
1Place paper in the lower tray of the Post Inserter, and align the lateral guide to the paper size.
%Set the paper by placing it so that its top side faces the back of the machine.
%To use the corner staple or 2-staple option, load the paper face up.
%To perform Punch, load the paper face up.
%To perform Bind, load the front side of the bound paper face down.
%To perform Tri-Fold, load the outside of the tri-folded paper face down.
2Press [Finishing] key and [Select punch] key, and select the desired finishing.
%To configure Finishing settings, press [Finishing] key to turn the LED on. To configure punch 
settings, press [Select punch] key to turn the LED on.
%Punch settings are available together with the corner staple or 2-staple option.
3Press the [Start/stop] key.
%If [Start/stop] key is pressed during operation, the operation will be stopped.
5.1.7 Separate Scan
When the original contains pages exceeding the capacity of the ADF, you can divide the original into several 
batches to handle each lot as a single copy job. You can also use the copy function by switching between 
the ADF and the original glass for scanning the originals.
0Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling 
of the original or failure of the machine.
0When making 2-sided or combined copies using the original glass, the machine can scan a number of 
original pages without enabling Separate Scan.
1Load the original.
2In the Basic tab, press [Separate Scan].
ABC
Front
CoverFront
Cover
ABCABCABC
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-14
5.1 Basic5
3Press the [Start] key.
The original is scanned.
4Load the next batch of the original, and then press the [Start] key.
%To change the scanning settings, press [Change Setting].
5Repeat Step 4 until all pages of the original are scanned.
6After all original pages have been scanned, press [Finish].
7Press the [Start] key.
dReference
To set the Separate Scan output method:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method].
5.1.8 Auto Rotate OFF
Select this setting to copy the original according to the paper orientation without rotating the image.
0For some paper sizes or zoom values, part of the image may be cut off.
%Press [Basic] ö [Auto Rotate OFF].
Downloaded From ManualsPrinter.com Manuals