Konica Minolta bizhub C652 User Manual

							bizhub C652/C652DS/C552/C552DS/C4522-19
2.3 Option2
* Press the output tray switch to move folded and center stapled paper to the end of the folding output tray.4 Horizontal transport unit cover
5 Jam removal dial [FN8]
6 Guide lever [FN7]
7 Guide lever [FN9]
8 Jam removal dial [FN6]
9 Jam removal dial [FN5]
10 Guide lever [FN3]
11 Guide lever [FN4]
12 Punch kit
13 Punch scrap box
14 Guide lever [FN10]
15 Recessed pull
16 Jam removal dial [FN11]
17 Saddle stitcher
18 Output belt
19 Output tray switch
*
20 Folding output tray
21 Jam removal dial [FN2]
22 Guide lever [FN1]
23 Staple replacement door
24 Guide lever [FN13]
25 Guide lever [FN14]
26 Exit cover No. Name
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-20
2.3 Option2
2.3.2 Job separator JS-602
No. Name
1 Finishing tray
2 Job separator cover
21
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-21
2.3 Option2
2.3.3 Z Folding Unit ZU-606
No. Name
1 Z folding/conveyance unit
2 Guide lever [FN1]
3 Punch scrap box
4 Front door
5 Guide lever [FN6]
6 Guide lever [FN7]
7 Guide lever [FN8]
8 Recessed pull [FN2]
9 Jam removal dial [FN5]
1
2
34
589
71110
6
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-22
2.3 Option2
2.3.4 Post Inserter PI-505
10 Guide lever [FN3]
11 Jam removal dial [FN4] No. Name
No. Name
1 Post inserter control panel
2 Lower tray paper guide
3 Lower Tray
4 Upper Tray
5 Upper Tray paper guide
6 Upper unit release lever
6
1
3
45
2
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-23
2.3 Option2
2.3.5 Finisher FS-527/ Saddle Stitcher SD-509/ Punch Kit PK-517/ Job Separator 
JS-603
1234
6 5
7
8
9
10
11
12 13
14
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-24
2.3 Option2
No, Name
1 Output tray 2
2 Output tray 1
3 Front door
4 Horizontal transport unit cover
5Stapler
6 Guide lever [FN3]
7 Jam removal dial [FN2]
8 Guide lever [FN1]
9 Guide lever [FN4]
10 Staple holder
11 Punch scrap box
12 Saddle stitcher
20
17
18
19
1615
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-25
2.3 Option2
2.3.6 Job Separator JS-504
13 Jam removal dial [FN6]
14 Recessed pull [FN5]
15 Transport unit
16 Punch kit
17 Job separator
18 Staple cartridge
19 Recessed pull [FN7]
20 Folding output tray No, Name
No. Name
1 Jam removal dial
2 Eject assist lever
3 Output tray 2
4 Tray extension
5 Output tray 1
1
2
3
4
5
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4522-26
2.3 Option2
2.3.7 Large capacity unit LU-301/LU-204
No. Name
1 Jam removal cover
2 Upper door
3 Paper take-up roller
4 Paper-empty indicator
5 Release lever
13
2
5
4
13
2
5
4
Downloaded From ManualsPrinter.com Manuals 
						

							3Using this machine
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4523-2
3.1 Turning on or off the machine3
3 Using this machine
3.1 Turning on or off the machine
This machine has two power controls: the [main power switch] and [sub power switch].
The [main power switch] turns on or off all functions of the machine. Normally, keep the [main power switch] 
on.
The [sub power switch] turns on and off machine operations, for example, for copying, printing or scanning. 
Turning [sub power switch] off causes the machine to enter power-saving mode.
0When the [sub power switch] is turned on, the indicator on the [Start] key lights up in orange, and a 
screen appears to indicate that the machine is starting up. After a few seconds, the message Warming 
up. Ready to scan. appears in the touch panel, and the indicator on the [Start] key lights up in blue, 
indicating that a job can now be queued.
0A job can also be queued while the machine is warming up after the [sub power switch] is turned on. 
After the machine has finished warming up, the scanned image will be printed.
0The default settings are the settings that are selected immediately after the machine is turned on and 
before any settings are configured from the control panel or touch panel, and those that are selected 
when the [Reset] key is pressed to cancel all settings configured from the control panel or touch panel. 
The default settings can be changed.
0Do not turn off the [main power switch] while a queued job or stored data is waiting to be printed. The 
jobs yet to be printed will be deleted.
0Settings that have not been registered and jobs in the printing queue are cleared when the [main power 
switch] and [sub power switch] are turned off.
0To turn the [main power switch] on immediately after turning it off, wait for 10 or more seconds before 
turning it on again. Not doing so may result in an operation failure.
0Do not turn off the [main power switch] or [sub power switch] while images are being scanned, 
transmitted, or received. Data being scanned or communicated will be deleted.
0Do not turn off the [main power switch] or [sub power switch] during the copying or printing process. If 
you turn it off, a paper jam may occur.
0Do not connect or disconnect the USB cable of the compact keyboard while this machine is turned on. 
Do not also connect another medium to the USB port for the compact keyboard.
1To turn the power on, open the main power switch cover, and then 
press n on the [main power switch].
2Close the main power switch cover.
3Press the [sub power switch].
Check that the touch panel is turned on.
Downloaded From ManualsPrinter.com Manuals