Konica Minolta bizhub C652 User Manual

							bizhub C652/C652DS/C552/C552DS/C4525-25
5.4 Application5
2Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Insert Image]. 
3Press the [Start] key.
4Place the original to be inserted on the original glass.
5Press the [Start] key.
%To insert a multi-page original, repeat steps 4 and 5 until all pages of the insertion original are 
scanned in the order that they are to be inserted.
6Press [Finish].
7Press the [Start] key.
Copying begins. Settings
P --- Specify the position to insert the page scanned through the original 
glass.
Sort Sorts specified pages in the ascending order.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-26
5.4 Application5
Chapters
When making 2-sided copies, the pages specified as the first page of a chapter can be printed on the front 
side of the paper. If the document was arranged so that the specified page would be printed on the back side 
of a page, the page is left blank and the specified page is printed on the front side of the next page.
0You can set up to 30 positions for the first page of chapters. 
0Enable the Chapters function to set [1-Sided > 2-Sided]. For a 2-sided original, select [2-Sided >2- 
Sided].
0Make sure that the paper loaded for the first page of the chapter and for text copies have the same size 
and orientation.
%Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Chapters]. 
dReference
To configure the 2-sided copy mode:
Press [Basic] ö [Duplex/Combine].
Settings
P --- Specify the first page of the chapters. 
Sort Sorts specified pages in the ascending order.
Chapter Paper Specify the paper tray for paper to be inserted for the first page of the chap-
ter.
Copy Insert Makes copies of the first pages of the chapters on paper of a different type 
from that for the text pages.
None Copies all pages with the same type of paper.
3
7
7
386
6
2
4
4
253
3
3
7
7
385
563
34
8
8
33
7
7
6
65
5
1
1
1
12
1
1
1
12
22
4
4
3
32
2
11
1
1
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-27
5.4 Application5
Program Jobs
When the originals to be copied include different types of materials such as a 1-sided original for full size 
copying and a 2-sided original for enlarged copying among other things, you can use this setting for scanning 
various originals with different settings and then copy them all in a single copying job.
Different Zoom or Paper settings can be specified for a part of the original or Finishing settings or a numbering 
function can be set after the entire original is scanned, and then all copies can be printed together.
0Up to 100 types of originals can be scanned.
0When configuring a program job, the [Group] setting cannot be selected in the Finishing screen. 
Instead, select [Sort].
1Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Program Jobs]. 
2Select the desired copy settings, and then press the [Start] key.
3Press [Fix].
%Press [Retry] to delete the scanned job. Press [Change Setting] to configure the copy settings.
%When the original has been loaded on the original glass, press [Finish].
4Load the next original and press [Change Setting].
4
43
32
21
1REPORT
4
23
32
2
4
43
32
2
1
1
REPORT
1
10001REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-28
5.4 Application5
5Select the desired copy settings, and then press the [Start] key.
%Repeat Steps 3 to 5 until all originals have been scanned.
6After all original pages have been scanned, press [Finish].
7Press [Yes].
8Specify finish settings as needed.
9Press [Start] or the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-29
5.4 Application5
5.4.2 Edit Color
Neg./Pos. Reverse
Use this function to enable the original to be copied with the density and gradations of the image inversed.
The images in the original are copied and output reversed like negative film of photographs.
0If a single color is selected, the images are reversed relative to the selected color.
0If a background color is selected, colors are reversed relative to the selected base color and the color 
of the images.
%Press [Application] ö [Edit Color] ö [Neg./Pos. Reverse]. 
%To cancel the Neg./Pos. Reverse function, press [Neg./Pos. Reverse] again.
dReference
To set Single Color:
Press [Basic] ö [Color] ö [Single Color].
To Set Background Color:
Press [Application] ö [Edit Color] ö [Background Color]. 
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-30
5.4 Application5
Mirror Image
Copy originals as mirror images.
%Press [Application] ö [Edit Color] ö [Mirror Image]. 
Settings
Original Size Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original 
size.
Custom Size Enter the original size.
Photo Size Select the photo size.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-31
5.4 Application5
Background Color
Color the blank area of the original with a specified background color.
%Press [Application] ö [Edit Color] ö [Background Color]. 
Color Adjustment
Adjust the image quality to fit an image based on the color-copied original.
1Press [Application] ö [Edit Color] ö [Color Adjust].  Settings
Select Color Select a background color.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-32
5.4 Application5
2Configure respective functions.
%Press [Sample Copy] to see how it will appear with the currently specified color quality adjustment 
settings. Settings
Brightness Adjust the brightness of the copied image.
Contrast Adjust the copy density balance.
Saturation Adjust how vivid colors should be for full color copies.
Red Adjust how vivid red colors should be for full color copies.
Green Adjust how vivid green colors should be for full color copies.
Blue Adjust how vivid blue colors should be for full color copies.
Hue Adjust the hue for full color copies.
The hue refers to a color trend relative to discrete colors such as red, 
blue and yellow. By adjusting the hue, the image can attain more red-
dish or bluish tone, for example.
Copy Density Adjust copy density (lighter or darker).
Sharpness Adjust the sharpness to emphasize the edges of text so that copied 
text can be read more easily. You can make an overly sharp original 
image softer or a blurry image clearer.
Color Balance Adjust the individual concentrations of yellow (Y), magenta (M), cyan 
(C), and black (K) for full-color copies.
Full-color copy reproduces colors of the original by mixing toners of 
four colors: yellow, magenta, cyan, and black.
By changing the amount of each of the four toners, adjust the tints in 
the copy.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-33
5.4 Application5
5.4.3 Book Copy/Repeat
Book Copy
Divides or does not divide page spreads (such as a book or catalog) into left and right pages to copy data.
This function enables copying with the ADF open by placing the original on the Original Glass. If necessary, 
you can place an original image at the center of the paper to copy.
0Place the original on the original glass.
0If [Book Copy] is selected, [Image Adjust] is set to [Centering] and [Erase] is set to [Non-Image Area 
Erase] automatically. For details on [Centering], refer to page 5-39. For details on [Non-Image Area 
Erase], refer to page 5-41. The automatically set [Centering] or [Non-Image Area Erase] can be 
cancelled.
0When [Book Spread] or [Separation] is selected, pressing the [Start] key starts printing.
0When [Front and Back Cover] is selected, the scanning operation starts with the front cover followed 
by scanning of the back cover, and ends with scanning of all two-page spreads of the body text in the 
order of the page numbers.
0When [Front Cover] is selected, all two-page spreads are scanned in order after the front cover.
0When [Front and Back Cover] or [Front Cover] is selected, wait until all pages in the original are scanned 
and then press [Finish] and then the [Start] key to start printing.
%Press [Application] ö [Book Copy/Repeat] ö [Book Copy]. 
Settings
Book Spread Copies both pages of a two-page spread original as a one page original.
Separation Copies the right and left pages of two-page spreads separately in the order 
of the page numbers.
Front Cover Copies the front cover, the right and left pages of two-page spreads sepa-
rately in the order of the page numbers, and the back cover in this order.
Front and Back Cover Copies the front cover, separate copies of each page in the page spreads 
and the back cover in the original page order.
SURVEYOR’S
REPORTSURVEYOR’S
REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-34
5.4 Application5
Image Repeat
An original image can be repeatedly printed on a single sheet of paper. Specify the original and paper sizes 
or the zoom to automatically calculate the number of images to be copied accordingly. Alternatively, specify 
the desired number of repetitions.
%Press [Application] ö [Book Copy/Repeat] ö [Image Repeat].  Frame Erase Erases projection of the dark shadow around the book.
Frame Configure the width of the area around the entire 
frame to be erased.
Top, Right, Bottom, 
LeftConfigure the width of the top, right side, bottom 
and left side of the frame to be erased.
None Select this settings to not erase the frame.
Center Erase Erases projection of the dark shadow at the center of the book.
Binding Position Select the binding position of the original.
To indicate it, select [Separation], [Front Cover], and [Front and Back Cover].
Settings
With Margin Repeats copying of the scanned area of the original so that the copy area of 
the sheet is filled with the copied image. If the entire image does not fit into 
the copy area, the extra range is not copied.
Without  Margin Repeats copying of the scanned area of the original so that the sheet is filled 
with the copied image. However, some parts of the image may be lost.
Auto Detect Automatically detects the area to be scanned. Settings
Downloaded From ManualsPrinter.com Manuals