Konica Minolta bizhub C652 User Manual

							bizhub C652/C652DS/C552/C552DS/C4525-35
5.4 Application5
Poster Mode
This function enables enlarged copy of the original image to a size exceeding the paper size that can be 
loaded in the machine, such as the 34 e 44 (A0) or 24 e 36 (B0) size. Specify the original size and the output 
size (enlarged copy size) to output enlarged copies of divided sections of the original onto separate sheets 
of paper respectively. Create an enlarged copy of the specified finished size by joining those copies of 
sections.
To create an 34 e 44-size (A0-size) poster, create copies of sections on eight 11 e 17-size (A3-size) sheets 
and join them together.
0Place the original on the original glass.
0In Poster Mode, the number of copies is set to 1. 
%Press [Application] ö [Book Copy/Repeat] ö [Poster Mode].  Set Range Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, or the reading range 
must be specified, select the original size.
Custom Size Enter the original size.
Photo Size Select the photo size.
2/4/8 Repeat 2 Repeat
4 Repeat
8 RepeatRepeats copying of the scanned area of the original 
as many times as specified. Note, however, that an 
image that does not fit within the size of the paper 
used is copied with partial cutoff.
[Repeat Interval Settings] can be configured only 
for [2 Repeat].
Repeat Interval Set-
tingsSpecify the clearance between copied images.
Settings
Image Size Select the finished image size.
Custom Size Enter the finished image size.  Settings
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-36
5.4 Application5
Booklet Original
A catalog with its staples removed can be copied and bound with staples at the center to create copies of 
the original catalog.
0This function is available if a saddle stitcher is installed in the optional finisher.
NOTICE
Load a catalog with the staples removed.
1Load the original.
%To use the original glass, position the pages in order, starting with the side that includes the first 
page, then the side that includes the second page, then the side that includes the third page. Paper Size • North American model(inch):
Configure the width of the binding margin (1/16 inch to 3/4 inch) with 
pressing [+] and [-]. When [None] is selected, the binding margin width is 
set to 0 inch.
• European model(cm):
Enter the width of the binding margin (0.1 mm - 20.0 mm). When [None] 
is selected, the binding margin width is set to 0 mm.
Zoom  Enter the zoom to output a copy of the finished size.
Original Size Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original 
size.
Custom Size Enter the original size.
Photo Size Select the photo size. Settings
72
2
18
2
27
754
4
36
54
4
36
Staples
+
2781
4563
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-37
5.4 Application5
%To use the ADF, load the pages with the side that includes the first page on top.
2Press [Application] ö [Book Copy/Repeat] ö [Booklet Original].
3Press the [Start] key.
4After all original pages have been scanned, press [Finish] and the [Start] key.
5.4.4 Page Margin
Copies can be printed with a binding margin so that the pages can easily be filed. When scanning a 2-sided 
original, you can specify the paper binding position (binding margin for the paper) to prevent the copy from 
being printed upside-down.
Left
Top
Right
0You can specify the binding position without creating a binding margin.
0For 2-sided copy, you need to set the paper binding position and the original direction. Otherwise, the 
original image may be copied up-side-down.
0If the positions of the staples or punched holes are different from the binding position, the positions of 
the staples or punched holes are given priority.
0If part of the image is lost when copied with the specified binding margin settings, reduce the zoom and 
perform copying.
%Press [Application] ö [Page Margin].
3
3
4
6
6
51
1
2
8
8
7
4
4ABCDEFGHI
3
3ABCDEFGHI
2
2ABCDEFGHI
1
1ABCDEFGHI
3
3ABCDEFGHI
12
AB
DE
GH
4
4ABCDEFGHI
2
2ABCDEFGHI
2
2ABCDEFGHI
1
1ABCDEFGHI
4
4ABCDEFGHI
2
2ABCDEFGHI
2
2ABCDEFGHI
1
1ABCDEFGHI
4
4
ABCDEFGHI
3
3
ABCDEFGHI
2
2
ABCDEFGHI
1
1
ABCDEFGHI
3
3
ABCDEFGHI
ABCDEF
12ABCDEF
44
ABCDEFGHIABCDEFGHI
22
ABCDEFGHI
11
ABCDEFGHI33
ABCDEFGHI
12BC
EF
HI
4
4ABCDEFGHI
2
2ABCDEFGHI
2
2ABCDEFGHI
1
1ABCDEFGHI
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-38
5.4 Application5
dReference
To set the zoom:
Press [Basic] ö [Zoom].
Settings
Margin Position Select an option from [Auto], [Left], [Top] and [Right].
When Auto is selected, the binding position is automatically set.
• This function automatically determines the binding position according to 
the orientation of the loaded original. If the original length is 11-11/16 
inch (297 mm) or less, a binding position along the long side of the paper 
is selected. If the original length is more than 11-11/16 inch (297 mm), a 
binding position along the short side of the paper is selected.
• The binding position is set on the upper or left-side end.
• Be sure to load the original so that its top side is placed in the back. If 
the document is loaded in any other orientation, this setting fails.
Image Shift Adjust the image position according to the binding margin.
Change Back Shift Adjust the image position on the back side of the 
paper in the 2-sided copy mode.
Adjust Value • North American model (inch): Configure the width of the binding margin 
(1/16 inch to 3/4 inch) with pressing [+] and [-]. When [None] is selected, 
the binding margin width is set to 0 inch.
• European model (cm): Enter the width of the binding margin (0.1 mm - 
20.0 mm). When [None] is selected, the binding margin width is set to 0 
mm.
Original Direction Select the orientation of the original loaded into the ADF or placed on the 
original glass.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-39
5.4 Application5
5.4.5 Image Adjust
If the paper is larger than the original, you can enlarge the original and copy it into the center of the paper.
Full Size
Center Zoom
Centering
%Press [Application] ö [Image Adjust].
Settings
Full  Size Enlarges the image up to the largest possible paper size that can contain the 
entire original, and copies the image at the center of the paper.
Place the original on the original glass.
Center  Zoom Enlarges the image up to the largest possible paper size that can contain the 
entire original, and copies the image at the center of the paper. However, 
some parts of the image may be lost.
Place the original on the original glass.
Centering Copies the original image at the center of the paper without enlarging it.
Original Size Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original 
size.
Custom Size Enter the original size.
Photo Size Select the photo size.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-40
5.4 Application5
5.4.6 Booklet 
The page order of the scanned original is automatically arranged to produce 2-sided 2 in 1 copies in a page 
layout for center binding, such as for a magazine.
0Center Staple & Fold or Half-Fold is available if the Saddle Stitcher is installed in the optional Finisher.
0Generally, a multiple of 4 pages is required with a 1-sided original, and a multiple of 2 pages is required 
with a 2-sided original. If there are not enough pages, blank pages are automatically added at the end.
0If a booklet is selected with the Auto Paper Select enabled, the zoom is automatically set at 64.7% 
(70.7%).
%Press [Application] ö [Booklet].
Settings
Left Bind/Right Bind Select the output binding position for copies to be output.
Center Staple & Fold Staples copies at two places along the center, then folds the copies in half 
before feeding them out.
Half-Fold Feeds out a copied sheet by folding it in two.
No This setting feeds out a copied sheet without Center Staple & Fold or Half-
Fold.
Paper Select the paper tray loaded with the desired paper.
Cover Sheet Copies the front and back cover sheets onto separate paper when copying 
an original with a front/back cover sheet. When the original to copy does not 
have a front and back cover, you can insert blank sheets of paper as the 
front and back covers.
8
87
73
32
21
1
REPORT
63
6354
81
817
REPORT2
8
87
73
32
21
1
REPORT
36
6645
18
182
REPORT7
Right bindingLeft binding
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-41
5.4 Application5
dReference
To set to an appropriate zoom:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Auto Zoom for Combine/Booklet].
5.4.7 Erase
Frame Erase
Copies can be produced by erasing shadows of punched holes, unnecessary areas around the original text, 
such as the transmission information on received faxes and the shadows of punched holes. All four sides 
around the original can be erased in the same width or in a different width for each side.
%Press [Application] ö [Erase] ö [Frame Erase]. 
Settings
Frame Erases the four sides of the original in the same width.
Top Right Bottom Left Erases each frame side in a different width.
+/- • North American model (inch): Press [+], [-] to set the erasing width be-
tween 1/16 inch and 2 inch.
• European model (cm): Press [+], [-] to set the erasing width between 0.1 
mm and 50.0 mm. The erasing width can also be entered using the key-
pad.
None Sets the erasing width to 0 inch (0 mm).
A
A:1/16 inch to 2 inch (0.1 mm to 50.0 mm)
A
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-42
5.4 Application5
Non-Image Area Erase
This function enables copying with the ADF open while having an original that cannot be loaded in the ADF 
placed at a desired position on the original glass. 
The original is automatically detected and the area outside the original text is erased.
Erase methods include Bevel and Rectangular. Bevel is used when the background of the original is 
thin and Rectangular is used when it is dark.
You can place the original on any position without opening or closing the ADF so that you can make copies 
promptly. In addition, toner consumption will be reduced as the area outside the original text is erased.
0If erasing is not performed as desired, set Erase Operation under Erase Adjustment in Administrator 
Settings.
0The size of the original automatically detected is 3/8 inch e 3/8 inch (10 mm e 10 mm) or larger.
If the detection fails, a blank sheet of paper is output.
0You cannot make copies with the ADF closed.
0The original image may be defected at its top or end.
%Press [Application] ö [Erase] ö [Non-Image Area Erase]. 
dReference
To set Erase Operation:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö 
[Erase Adjustment].
Rectangular erasing
Bevel erasing
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-43
5.4 Application5
5.4.8 Stamp/Composition
Add date and time, page number, stamp, image, or header or footer to make copies.
Item
Date/Time Adds date and time to copies.
Page Number Adds page numbers or chapter numbers to copies.
Stamp Adds preset or registered stamps to copies.
Copy  Security Adds a hidden text for preventing unauthorized copying in a document when 
copying. This function also allows you to copy a text with copy inhibit infor-
mation or password embedded. Using this function, you can prevent original 
information from being leaked.
Stamp Repeat Repeats copying of a stamp or the date and time onto the paper.
Header/Footer Adds date and time to the top or bottom of the paper to print copies.
Watermark Adds a watermark (watery text) to the center of the copied pages.
Overlay Makes copies with the image of the first scanned original page overlapping 
the subsequent original images.
Registered Overlay Saves an image of the scanned original as a registered overlay in the hard 
disk and later overlay the registered image on the copy of another original.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-44
5.4 Application5
Date/Time
You can select the print position and notation format to print the date and time. Specify whether to print on 
all pages or only on the first page.
0The date/time stamp cannot be printed on blank pages inserted using the Cover Sheet, Insert Sheet 
and Chapters functions. Change the setting for printing on blank pages in Administrator Settings to 
enable blank page printing.
0The date/time as of scanning the original is stamped on the paper.
%Press [Application] ö [Stamp/Composition] ö [Date/Time].
dReference
To enable printing on blank pages:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print Settings].
Settings
Date Format Select the type (format) of date and time notation.
Time Format Select the type (format) of date and time notation. When [None] is selected, 
the time is not printed.
Pages Select to print the date/time on all pages or only on the first page.
Print Position Select a position from the nine print position options. 
Adjust Position Adjust horizontal and vertical positions between 
1/16 inch (0.1 mm) and 1-15/16 inch (50.0 mm).
Text Details Set the text color, size and type.
Downloaded From ManualsPrinter.com Manuals