Konica Minolta bizhub C35P User Manual
Have a look at the manual Konica Minolta bizhub C35P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Hard Disk Kit HD-P03 10-10 11Reconnect the power cord, and turn on the printer. 12Declare the Hard Disk in the Windows printer driver (Properties/Configure tab). Downloaded From ManualsPrinter.com Manuals
CompactFlash10-11 CompactFlash If you install a CompactFlash card, the followings can be performed: –Collate printing –Fonts forms download –User Authentication/Account Track –Direct printing (including the use of PageScope Direct Print) –XPS printing Only CompactFlash cards with a capacity of 1 GB, 2 GB, 4 GB or 8 GB can be used. The job printing/saving function is not available with a CompactFlash card. These functions require that an optional hard disk kit HD-P03 be installed. A hard disk kit HD-P03 and a CF Adapter MK-725 cannot be installed simultaneously. Installing the CF Adapter MK-725 and CompactFlash card Note If the installed CompactFlash card is used with a device other than this printer, such as a computer or digital camera, the card is automatically formatted and all of its data is deleted. Note It is very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 10-3. In addition, always handle circuit boards by their edges only. Downloaded From ManualsPrinter.com Manuals
CompactFlash 10-12 1Turn off the printer and discon- nect the power cord and inter- face cables. 2Using a screwdriver, remove the back cover. 3Using a screwdriver, remove two screws. Downloaded From ManualsPrinter.com Manuals
CompactFlash10-13 4Slide the panel slightly to the down and lift it off the printer. 5Attach the two cables to the CF adapter. Downloaded From ManualsPrinter.com Manuals
CompactFlash 10-14 6Fully insert the CompactFlash card into the appropriate slot. When the CompactFlash card is correctly inserted, the button on the top side of the slot (circled in the illustration) slightly pops out. Before removing the CompactFlash card, press in this button. 7Insert the CF adapter mounting pins. Downloaded From ManualsPrinter.com Manuals
CompactFlash10-15 8Plug the two cables on the CF disk kit into the connector. 9Reinstall the panel and tighten two screws. 10Attach the back cover and tighten four screws. 11Reconnect all interface cables. 12Reconnect the power cord, and turn on the printer. 13Declare the Memory card in the Windows printer driver (Properties/Con- figure tab). Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit PF-P09 10-16 Lower Feeder Unit PF-P09 You can install up to one optional lower feeder unit PF-P09 (Tray 3). The lower feeder unit PF-P09 increases your printer’s media feed capacity by 500 sheets. Kit Contents „Lower feeder unit with a tray (500-sheet capacity) „Cover Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit PF-P0910-17 Installing a Lower Feeder Unit PF-P09 Note Since consumables are installed in the printer, be sure to keep the printer level when moving it in order to prevent accidental spills. 1Turn off the printer and discon- nect the power cord and inter- face cables. 2Prepare the lower feeder unit. Be sure to place the lower feeder unit on a level surface. 3Attach the cover. 4Open the right side cover of the lower feeder unit. The right side cover of the lower feeder must be opened before the feeder can be installed onto the printer. Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit PF-P09 10-18 5With another person’s help, place the printer on top of the lower feeder unit, making sure that the positioning pins on the lower feeder unit correctly fit into the holes on the bottom of the printer. WARNING! This printer weighs approximately 27 kg (60 lbs) when it is fully loaded with consumables. The printer must be lifted by two people. 6Close the right side cover of the lower feeder unit. 7Reconnect all interface cables. 27 kg 60 lbs Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit PF-P0910-19 8Reconnect the power cord, and turn on the printer. 9Declare Paper Source Unit 3 in the Windows printer driver (Properties/ Configure tab). Downloaded From ManualsPrinter.com Manuals