Konica Minolta bizhub C35P User Manual

							Configuration Menu Overview 4-48
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, auto 
configuration of IPv6 is 
enabled.
If 
NO is selected, auto config-
uration of IPv6 is disabled.
LINK 
LOCALDisplays the Link-Local 
address.
GLOBAL
ADDRESSDisplays the global address.
GATE-
WAY 
ADDRESSDisplays the gateway 
address.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is enabled.
If 
NO is selected, NetWare is disabled.
APPLE
TALKENABLESettingsYES/NO
If YES is selected, AppleTalk is enabled.
If 
NO is selected, AppleTalk is disabled.
SPEED/
DUPLEXSettingsAUTO/10BASE FULL/10BASE 
HALF/100BASE FULL/100BASE 
HALF/1000BASE FULL
Specify the transmission speed for the network and 
the transmission method for bidirectional 
transmission.
IEEE 
802.1XENABLESettingsYES/NO
If YES is selected, IEEE 802.1X is 
enabled.
If 
NO is selected, IEEE 802.1X is dis-
abled.
MEMORY 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If 
ENABLE is selected, memory direct printing is enabled.
If 
DISABLE is selected, memory direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-49 SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
DIGITAL
SIGNATURE
XPS ERROR
PAGE
XPS*****
BLACK 
OVERPRINT
AUTO 
TRAPPING
GRAYSCALE 
PAGE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-50
LCD 
CONTRAST
SECURITYCHANGE 
PASSWORD
LOCK PANEL
CLOCKDATE 
(xx.xx.xx)
TIME
HDD FORMAT*USER AREA 
ONLY
ALL
ENERGY 
SAVER TIME**
MENU 
TIMEOUT
TIME ZONE
HOLD JOB 
TIMEOUT*
CARD FOR-
MAT***USER AREA 
ONLY
ALL
DO STARTUP 
PAGESTARTUP 
OPTIONS
AUTO 
CONTINUE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-51
* These menu items appear only if an optional hard disk kit HD-P03 is 
installed.
** This menu item appears when you select 
ON from the ENERGY 
SAVER
 menu.
*** This menu item appears only if an optional CompactFlash card is 
installed.
**** This menu item appears only if the optional lower feeder unit 
PF-P09 is installed.
***** This menu item appears only if an optional hard disk kit HD-P03 
or a CompactFlash card is installed.
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the contents of 
SYS DEFAULT 
MEMU
 to be displayed.
For details on 
LOCK PANEL, refer to “SYS DEFAULT MENU” on 
page 4-49.
ENABLE 
WARNINGPAPER EMPTYTRAY1
TRAY2
TRAY3****
TONER LOW
I-UNIT LOW
RESTORE 
DEFAULTSRESTORE 
NETWORK
RESTORE 
PRINTER
RESTORE ALL
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-52
All factory default values are shown in bold.
LAN-
GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/
POLISH/HUNGARIAN/SLOVAK/DANISH/
NORWEGIAN/SWEDISH/FINNISH/GREEK/
TURKISH/CATALAN
The display language of the message window can be changed 
to the selected language.
The language selections appear in the message window in the 
corresponding language. For example, 
GERMAN appears as 
DEUTSCH.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-53
EMULA-
TIONDEF. 
EMULA-
TIONSettingsAUTO/POSTSCRIPT/PCL
Specify the printer emulation language.
If 
AUTO is selected, the printer automatically selects 
the printer emulation language from the data stream.
POST-
SCRIPTWAIT 
TIME
OUTSettings0-300
Specify the time until an error is 
determined to be a PostScript error.
If 
0 is selected, no timeout is performed.
PS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error page is 
printed when a Postscript error occurs.
PS 
PROTO-
COLSettingsAUTO/NORMAL/BINARY
Specify the protocol for data transmissions 
with a PostScript data stream.
If 
AUTO is selected, the printer 
automatically selects an applicable 
protocol from the data stream.
AUTO 
TRAPPING
SettingsON/OFF
Select whether or not neighboring colors 
are printed superimposed in order to 
prevent white space around images.
BLACK 
OVER-
PRINTSettingsTEXT/GRAPHIC, TEXT, OFF
Specify whether black objects are printed 
(superimposed) on a neighboring color in 
order to prevent white space around black 
characters or figures.
If 
TEXT/GRAPHIC is selected, 
superimposed printing is applied to text 
and graphics.
If 
TEXT is selected, superimposed printing 
is applied to text.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-54
PCL CR/LF 
MAP-
PINGSettingsCR=CR LF=LF/CR=CRLF 
LF=LF/CR=CR 
LF=LFCR/CR=CRLF 
LF=LFCR
Select the definitions of the CR/LF codes 
in the PCL language.
LINES 
PER 
PAGESettings5-60-128
Specify the number of lines per page in the 
PCL language.
FONT 
SOURCEFONT 
NUMBERSettings0-102
Specify the default font in the 
PCL language.
The font numbers that appear 
correspond to the PCL font list. 
For details on printing the font 
list, refer to “PRINT MENU” on 
page 4-10.
PITCH 
SIZE
(POINT 
SIZE)Settings0.44-10.00-
99.99
(4.00-12.00-
999.75)
Specify the font size in the PCL 
language.
If the selected 
FONT NUMBER 
is for a bitmap font, 
PITCH 
SIZE
 appears. If the selected 
FONT NUMBER is for an 
outline font, 
POINT SIZE 
appears.
SYMBOL 
SETSpecify the symbol set used 
with the PCL language.
The default setting is 
PC8.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-55
XPS DIGI-
TAL
SIGNA-
TURESettingsENABLE/DISABLE
Select whether to enable or disable XPS 
digital signatures.
If 
ENABLE is selected, XPS digital 
signatures are enabled.
If 
DISABLE is selected, XPS digital 
signatures are disabled.
XPS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error report is 
printed after an XPS error has occurred.
If 
ON is selected, the error report is printed.
If 
OFF is selected, the error report is not 
printed.
PAPER DEFAULT 
PAPERPAPER 
SIZESettingsLETTER, LEGAL, EXECU-
TIVE
, A4, A5, A6, B5(JIS), 
B6(JIS), GOVT LETTER, 
STATEMENT, FOLIO, SP 
FOLIO
, UK QUARTO, 
FOOLSCAP, GOVT LEGAL, 
16K, PHOTO 4×6, KAI 16, 
KAI 32, ENV C6, ENV DL, 
ENV MONARCH, ENV 
CHOU#3
, ENV CHOU#4, 
B5(ISO), ENV #10, JPOST, 
JPOST-D, 8 1/8×13 1/4, 8 
1/2×13 1/2, CUSTOM
Select the size of media that is normally 
used.
The default setting for 120V model 
is 
LETTER. The default setting for 
all other models is 
A4.
Depending on the setting selected 
for 
SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE
, 
PHOTO 4×6 may change to 
PHOTO 10×15.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-56
CUSTOM 
SIZESpecify the media size when PAPER 
SIZE
 is set to CUSTOM.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–120V model: 216 mm
–All other models: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–120V model: 8.50 inches
–All other models: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm
(default)
–120V model: 279 mm
–All other models: 297 mm
„For INCHES: 5.83 to 
14.00 inches
(default)
–120V model: 11.00 inches
–All other models: 11.69 inches
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-57
PAPER 
TYPESettingsPLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2/SGL SIDE 
ONLY/SPECIAL PAPER
Select the type of media that is normally 
used.
UNIT 
OF 
MEA-
SURESettingsINCHES/MILLIMETERS
The units for specifying the size of custom media can 
be switched between inches and millimeters.
The default setting for 120V model is 
INCHES. The default setting for all other 
models is 
MILLIMETERS.
GRAY-
SCALE 
PAGESettingsAUTO/GRAYSCALE PRINT/COLOR PRINT
Specify the operation to be performed for black-and-white 
pages in a job specified for color printing.
If 
AUTO is selected, printing is automatically performed accord-
ing to the first page of the job.
If 
GRAYSCALE PRINT is selected, black-and-white printing is 
automatically performed depending on each page.
If 
COLOR PRINT is selected, color printing is performed, even 
for a black-and-white page.
STARTUP 
OPTIONSDO 
START-
UP 
PAGESettingsON/OFF
Select whether or not a startup page is printed when 
the printer is turned on.
Downloaded From ManualsPrinter.com Manuals