Key System U.S. Atlas Avm Jr Installation Programming Instruction Manual

 Appendix A  
Atlas AVM JR. Installation and Programming Manual 7-5  OPERATION COMMAND DTMF PC Set break time  
*460 + Day + Starting time + 
Ending time 3.5 4.9 Entering annual holiday dates 
*470 + DD + MM + hh:mm + 
hh:mm 
DD = Day of month 
MM = Month 
HH:MM = Start time 
Hh:mm = End time 
Note: Time as in 24hr format 3.5 4.8.1.2 Delete all holidays 
*470 + # 3.5 4.8.1.2 Delete all holidays on a 
specific date *470 + DD + MM + # 
DD = Day 
MM = Month 3.5 4.8.1.2 Delete all holidays for a 
specific...

Appendix A  
7-6 Atlas AVM JR. Installation and Programming Manual MAILBOX CONFIGURATION COMMANDS (CONT’D) OPERATION COMMAND DTMF PC Create a range of virtual 
mailboxes *520 + First mailbox + Last 
mailbox + # 3.6.1 4.6.2.1 Create a virtual mailbox 
*521 + Mailbox number + # 3.6.1 4.6.2 Play or skip time and date 
stamp for a range of 
mailboxes *530 + First mailbox + Last 
mailbox +B + # 
B = 0; Play the date and time 
B = 1; Skip the date and time 3.6.1 4.6.2.1 Play or skip time and date 
stamp for a...

 Appendix A  
Atlas AVM JR. Installation and Programming Manual 7-7 MAILBOX NOTIFICATION COMMANDS OPERATION COMMAND DTMF PC Set local notification for a 
range of mailboxes *700 + First mailbox + Last 
mailbox + X + #  
X = 0; disabled 
X = 1; LED 1 
X = 2; LED 2 
X = 3; Ring Signs 
X = 4; Rings 3.6.3.1 4.6.2 Set local notification for one 
mailbox *701 + Mailbox  + X + # 
X = 0; disabled 
X = 1; LED 1 
X = 2; LED 2 
X = 3; Ring Signs 
X = 4; Rings 3.6.3.1 4.6.2 Permit remote notification for 
a range of...

Appendix A  
7-8 Atlas AVM JR. Installation and Programming Manual 1
 Refers to PBX codes. Each code contains digits 0-9, *, #, Flash-1, Flash-2, 
Pause and Extension Number. 
When entering a code, dial: 
*0 for extension 
*1 for pause 
*2 for Flash-1 
*3 for Flash-2 
*4 for # 
N/A stands for Not Applicable. *5 for A 
*6 for B 
*7 for C 
*8 for D 
** for * 
 
  

 
Atlas AVM JR. Installation and Programming Manual 8-1 8. APPENDIX B  
The following pages include forms to help you properly setup and maintain the 
AVM JR. system using DTMF programming commands. OPERATION COMMAND VALUE Selecting opening menu *112 ____ ____ __ # 
         ____ ____ __ # 
         ____ ____ __ # 
         ____ ____ __ #  No. Of digits in an extension *300 _____  No. Of rings before the line is 
answered Line 1: *310 1 _____ 
Line 2: *310 2 _____ 
Line 3: *310 3 _____ 
Line 4: *310 4...

Appendix B  8-2 Atlas AVM JR. Installation and Programming Manual OPERATION COMMAND VALUE Flash 1 *370 _____   Voice Sensitivity *376 _____  Message Light On 1 Code *380 __________ #  Message Light On 2 Code *380 __________ #  Message Light Off Code *380 __________ #  Transfer Code *380 __________ #  Recall from Busy Code *380 __________ #  Recall from No Answer Code *380 __________ #  Transfer mode for all extensions 
except the operator *350 _____  Transfer mode for the operator *350 _____  Create a...

 Appendix B Atlas AVM JR. Installation and Programming Manual 8-3  
NOTIFICATION PARAMETERS 
Delay between notification of Ring Signs and Rings: *720 _____ 
Ring time notification of Ring Signs and rings *730 _____ 
Activate the LED notification *760 _____ 
SYSTEM TIME AND DATE 
See Section 3.4 for information on setting the system time and date using codes *420 and *430. 
SETTING THE WORKING TIME 
See Section 3.5 for information on setting the following schedule using codes *450 and *460. 
  Working...

Appendix B  8-4 Atlas AVM JR. Installation and Programming Manual This form contains the programming schedule for up to four script message. Please 
copy the form if you have more than four script messages. 
Note: The following numbers are dedicated to specific script messages: 
· 
Script message number 00 to the Day Mode Opening Menu 
· 
Script message number 10 to the Night Mode Opening Menu 
· 
Script message number 15 to the Break Time Opening Menu 
· 
Script message number 20 to the Holiday Mode...

 
Atlas AVM JR. Installation and Programming Manual 9-1 9. APPENDIX C  
This section lists the AVM JR. system messages and their numbers. You can hear each of 
these messages in the programming mode by dialing: 
*690 + language digit (0, 1 or 2) + system message number 
NO. SYSTEM MESSAGE 
000 This system has not been programmed.  Please refer to the installation manual 
for instructions.  Thank you. 001 Please hang up now. 
002 Please enter your password. 
003 Invalid entry. Please try again. 
004 Pease...

Appendix C  9-2 Atlas AVM JR. Installation and Programming Manual NUMBERS 
010 One 024 Fifteen 
011 Two 025 Sixteen 
012 Three 026 Seventeen 
013 Four 027 Eighteen 
014 Five 028 Nineteen 
015 Six 029 Twenty 
016 Seven 030 Thirty 
017 Eight 031 Forty 
018 Nine 032 Fifty 
019 Ten 033 Sixty 
020 Eleven 034 Seventy 
021 Twelve 035 Eighty 
022 Thirteen 036 Ninety 
023 Fourteen