Key System U.S. Atlas Avm Jr Installation Programming Instruction Manual

 
Atlas AVM JR. Installation and Programming Manual 11-1 11. APPENDIX E  
E.1 E.1   KSX KSX- -32/64/128/256 Detailed Programming 32/64/128/256 Detailed Programming   
E.1.1 Programming Voicemail Ports 
1. Enter system programming from any display telephone by dialing PROG, 
PROG, 1, 2, 3, HOLD. 
The display should show the following: M:. 
     Enter Mode No. 
2. Enter Mode 03 by dialing 03 
3. Enter the first port number that you are attaching to the voicemail. (01-32 for 
KSX-32, 0-64 for KSX-64,...

Appendix E  11-2 Atlas AVM JR. Installation and Programming Manual The display should show the following: M:. 
     Enter Mode No. 
2. Enter mode 67 by dialing 67” 
3. Dial the station group number you wish to assign your voicemail to (1-8). 
4. Dial the first position number of that station group (1 for KSX-32 and 01 for 
KSX-64/128/256). 
5. Dial the port number of the first port of voicemail. 
The display should show the following: M:67  XX  XX   XX 
     ST HUNT GROUP 
 
6. Press the HOLD” key...

 Appendix E Atlas AVM JR. Installation and Programming Manual 11-3 The display should show the following: M:39  1  1 
     ST GP RING - DAY 
  or 
     M:40  1  1 
     ST GP RING - NIT 
5. Press the HOLD key to save changes. 
6. Press the DATA key and repeat steps 1-6 until you have entered all the 
trunks that you wish to ring immediately to voicemail. 
7. Press the RLS key when finished. 
E.1.4  Programming Delayed Ringing 
1. Enter system programming from any display telephone by dialing PROG, 
PROG,...

Appendix E  11-4 Atlas AVM JR. Installation and Programming Manual value can be from 01-24.  This will allow you to program certain 
trunks for a longer delay. 
10. Press the HOLD key to save your programming. 
11. Press the RLS key to exit programming. 
E.2 E.2   KDX KDX- -500 Detailed Programming 500 Detailed Programming   
E.2.1 Programming Voicemail Ports 
1. Enter system programming from any display telephone by dialing PROG, 
PROG, 1, 2, 3, HOLD. 
The display should show the following: PROGRAM...

 Appendix E Atlas AVM JR. Installation and Programming Manual 11-5 The display should show the following: PROGRAM SECTION 
      
 
2. Enter System Programming mode by dialing 3. 
3. Enter Voicemail Station Hunt Group mode by dialing 50. 
4. Enter the first position of the hunt group by dialing 01. 
5. Enter your first port of voicemail (001-400). 
6. Press the HOLD key to save that port. 
7. Press the TRF key to move to the next position in that hunt group. 
8. Enter your next port of voicemail...

Appendix E  11-6 Atlas AVM JR. Installation and Programming Manual 7. You can either press the TRF key to advance to the next trunk and repeat 
steps 5-6 or you may press the DATA key and repeat steps 3-6 until all 
of the trunks you wish to ring directly to voicemail are programmed. 
8. Press the RLS key when you have finished programming. 
E.2.4  Programming Delayed Ringing 
1. Enter system programming from any display telephone by dialing PROG, 
PROG, 1, 2, 3, HOLD. 
The display should show the...