Inter-Tel Imx/Gmx 416/832 Installation Manual

INTJm-TELPRArnCEs 
IMX/GMX 416/832 INSTALLATZON & MAINTENANCE PROGRAMMING Issue 1, November 1994 
0 DID group description (up to 20 characters) and dis- 
play identification (up to seven characters) for each 
DID number. 
0 List the trunks that will be in the DID group by cir- 
cuit number. 
0 For each DID group, note the base number and the 
dialed number range that will be received from the 
central oflice. For example, if the customer has pur- 
chased a block of 100 DID numbers starting with...

PROGRAMMING rNTRR-TRLPRAcTIcES 
Issue 1, November 1994 
IMX/GMX 416/832 INS’WLLATION & MAINTENANCE 
J&g-in/Answer Patterns  Actions Setup Exit 
DID Groups 
04 
05 
06 
07 
08 
09 
10 
11 
12 
13.20 TRUNR GROUPS: Up to 102 trunk groups, 
with up to 344 trunks each, 
can be programmed in a stan- 
dard system. Expanded systems can have 142 trunk 
groups with up to 696 trunks each. To program the char- 
acteristics of an individual trunk group, scroll through 
the Trunk Groups list box until the desired...

PROGRAMMING 
Issue 1, November 1994 INTRR-TRLPRACTICES 
IM7UGM.X 
416/832 INSTALLATION & MAINTENANCE 
0 
option. (Dial-repeating trunk groups should have 
this 
option enabled.) If disabled, the 416/832 System 
automatically performs the handshake and then 
waits to receive digits. To enable the 416/832 Sys- 
tem to send dial tone, place an X in the Return Dial 
Tone check box by selecting it. (ln the default state, 
this option is enabled.) 
DID DIGIT TRANSLATION: There are trunks 
available that...

lNTRR-TRLPRAcTIcRS PROGRAMMING 
IMX/GMX 416/832 RWDALLATION & MALNTRNANCE Issue 1, November 1994 
c 
r 
Day Ring-in ‘Qpe 
0 l Single 0 
0 
Multiple 0 
Station: I Night Ring-in Type .-, 
Ring/Answer Pattern 
0 Single 0 l HuntAJCD 0 Single 0 Hunt/UCD 
0 Multiple 0 DISA 
0 Multiple l 0 DISA 
Hunt Group/UCD 
,_____Da;RihgIin_~pe__________,_‘_‘_______‘_____ _____ ___ ____------ 
I Night Ring-in Type -, 
DISA Security Codes 
Night: I1 
I Required for IC calls 
Nigh& Toll Restrictions 
13.32 RING-IN: (This is...

PROGRAMMING 
INTER-TELPRACTICES 
Issue 1, November 1994 
IMX/GMX 416/832 INSTALLA TION 81 MAINTENANCE 
l DISA: To assign the trunk group for DISA ring in, Required for IC Calls check box (by pressing the 
select the DISA option button.-A check box,

PROGRAMMING INTER-TELPRACTICES 
Issue 1, November 1994 IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
Central Office) to indicate whether it is due to PBX 
network installation or local office code absorption. 
ABSORBED DIGITS REPEATABLEz If the local 
central office absorbs digits, determine if they are 
“repeatable” (that is, the digit string is absorbed 
when it is dialed more than once), or if the digit 
string is processed as part of the telephone number 
when dialed a second time; If the digits are...

INTER-TELPRACTICES PROGRAMMING IMX/GMX 416/832 INST4LLATION 8z MAlNTENANCE Issue 1, November 1994 
wcription: Tenant Group: 
cl 
Trunk List 
I IO Tick Tone 
0 Music #2 I 
- - 
Number Day Ring-in Night Ring-in 
Name 
“.““’ 
[Add] (SetRing_in) (DeleteEntIyj 
- s@-mF 
0 Immediate 
0 l Wink 
0 Delay 
- DISA Codes - 
Day: 
I 
N@t: 0 
[ IJay SCOS I 
1 Exit 1 
[ Night SCOS 1 
DID Group Programming Window 
1336 The window shown above appears when an 
item is selected from the DID Groups list box shown on 
page...

PROGRAMMING INTER-TELPEACTICES Issue 1, November 1994 
IMX/GMX 416/832 INSTAJL4TION & MAINTENANCE 
13.42 
DAY/NIGHT SCOS (DISA Class of Service): 
(Available in Extended software packages only.) DISA 
trunks can be given 
day and/or night mode toll restric- 
tions like those described on page 4-27 for individual 
stations (except LCR-Only). When a DISA caller dials 
an outgoing call, the call is checked against the DISA 
trunk’s toll restriction. If the call is disallowed, the 
DISA caller is sent to the...