Inter-Tel Imx/Gmx 416/832 Installation Manual

INTER-TELPRAcTIcEs PROGRAMMING 
IMTVGMX 416/832 INST4LLATION % MAINTENANCE Issue 1, November 1994 
Username: I 
- 
Day Ring-in ‘Qpe 
0 l Single 0 HuntAJCD 
0 Multiple 0 
1 DISA 
Station: I Ring-In/Answer Pattern 
,-’ Night Ring-in ‘Qpe ‘-, 
13.48 DID NUMBERS: The list box shown on page 
5-115 lists the DID numbers, their ring-in types, and 
name. When an item in the list is selected, the window 
shown above appears. 
I 
0 
0 
swer Pattern list box until the desired line is high- 
lighted. The highlighted...

PROGRAMMING INTER-TELPRACTICES 
Issue 1, November 1994 
IMx/GMX 416/832 INSTALLATION & MAINTRNANCE 
changes. To-return to the DID Group X window without 
updating the database, select the Cancel button. 
Ring-In/Answer Patterns Window 
13.50 The 
following window appears when an item is 
selected from the Ring-In/Answer list box shown 
on page 5-108. 
Pattern Title: I I I I 
--- 
(Ring-In List 1 1 &swer List 11 Relay List 1 
--- 
The Answer pattern will always contain 
every station in the Ring-in...

PROGRAMMING INTER-TRLPRACTICES 
Issue 1, November 1994 IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
C. Tl PROGRAMMING 
13.56 The 
Tl Programming window allows you to 
program information that applies to all Tl trunks as well 
as to specific Tl Cards. The information that is pro- 
grammed 
common to all Tl Cards includes: 
l Ermr thresholds: The programmer can set numeri- 
cal thresholds (number per 
hour and number per 
day) forT1 Card errors. 
If a threshold is exceeded, an 
error is printed on the SMDR...

INTER-TELPRACTICES PROGRAMMING 
IMX/GMX 416/832 INSTALLATION & -ANCE Issue 1, November 1994 
- Line build-out (LBO): 
If the optional on-board 
CSU is installed, designate the LB0 attenuation 
of the Tl trunk connected to the card. This value 
is determined by the distance to the nearest pub- 
lic network Tl repeater. 
- 
DSX-1 line length: If the optional on-board 
CSU is 
not installed, designate the length of the 
cabling between the Tl Card and the external 
CSU, or between the Tl Card and the other...

PROGRAMMING 
Issue 1, November 1994 lNTER-TEJ_4PRAcTIcES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
FIGURE 5-l. 
Tl APPLICATIONS AND PROGRAMMING 
NOTE: For all installations, the card type and zero code are programmed to match the Tl span being installed. The 
PCM encoding law is determined by the location in which the Tl span is installed; in the United States it will usually 
be 
“p-law to p-law.” For the line build-out or line length option, select the number closest to the actual installation dis-...

PROGRAMMING INTER-TELPRACTICES 
Issue 1, November 1994 
IMJUGMX 416/832 lNSX4LLATION & MAINTENANCE 
Threshold Name meshold Programming 
Number/Hour Number/Day 
TODV (Transmit One’s Density Violations) 
- Dialing Feedback Configuration 
II 
Tl _Cara Programming 
DTMF Feedback Gain 
III 0 dB 
I I 
Dial-Pulse Feedback Gain 
I -4 dB I I 
. 4 I I 
Dial-Pulse Tone Selection 
L-l 7 
I I I I 1 , , , 
[ 
Backup J [ Exit ] 
13.59 To reach this window, select Tl Rogramming 
from the Trunk Programming menu or enter...