Inter-Tel GMX-48 INSTALLATION & MAINTENANCE Manual

INTER-TEL PRACTICES FEATURES 
GMX.48 INSTALLATION & MAINTENANCE Issue 2, May 1990 
FEATURES 
CONTENTS PAGE 
1. Introduction ......................................................... 4-4 
2. 
Accessing The Features ............................................... 4-4 
.: A. 
B. 
C. 
D. 
E. 
I? 
G. Feature Codes .................................................... 
Feature Keys ..................................................... 4-4 
SPCL And FLASH Keys ........................................... 
C.O....

FEATURES INTER-TEL PRACTICES 
Issue 2, May 1990 GMX-48 INSTALLATION & MAINTENANCE 
CONTENTS PAGE . . 
10. 
11. 
12. 
13. 
14. 
15. 
16. 
17. 
18. 
19. 
20. 
21. Intercom Calls ....................................................... 
A. Programming For Private Intercom Calls 
............................ 
B. Station-To-Station Calling ......................................... 
C. Intercom Camp On And Busy Station Callback (Queue) 
............... 
Inter-Station Messages...

INTER-TEL PRACTICES FEATURES 
GMX-48 INSTALLATION & MAINTENANCE Issue 2, May 1990 
CONTENTS PAGE 
22. 
23. 
24. 
25. 
26. 
27. 
28. 
29. 
30. 
31. 
32. 
33. 
34. 
Speed Dialing ....................................................... 4-74 
A. System Speed Dialing 
............................................. 4-74 
B. Station Speed Dialing ......................................... . ... 
4-78 
Intercom And C.O. Directory (Keysets Only) ............................. 4-80 
A. Intercom Directory...

FEATURES 
Issue 2, May 1990 INTER.TEL PRACTICES 
GMX-48 INSTALLATION dz MAINTENANCE 
1. INTRODUCTION 
1.1 The system, in addition to its sleek, modular ap- 
pearance and easy installation and programming, 
provides over 120 user-friendly features. To describe 
the system features, this portion of the manual has 
been divided into the following sections: 
Accessing the Features: This section contains a list 
of the feature codes and their definitions. 
System Organization: This section describes pos-...

‘. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
D. C.O. LINE ACCESS CODES 
2.5 The feature codes used to access C.O. lines are listed below. 
If a default feature key may be used in place of a 
code, it is indicated at the end of the explanation. 
FEATURE NAME CODE DFFlNlTloN 
Automatic Line Selection 89 Answers the call that has been ringing or holding 
the longest at that station. Refer to page 4-29 for 
the priority list. Or, if no call is ringing or holding, 
the highest-numbered...

FEATURES INTER-TEL PRACTICES 
Issue 2, May 1990 GMX-48 INSTALLATION & MAINTENANCE 
FFATURE HA?& 
Call Forward: 
Call Forward All Calls 
CODE 
355 
PEFlNlTlON 
Immediately forwards all calls to another station or 
to an outside telephone number. (Keysets use the 
FWD key) 
Call Forward If Busy 
Call Forward If No Answer 357 
356 Immediately forwards all calls to another station or 
to an outside telephone number when the station is 
in use. (The keyset FWD key may be 
reprogrammed with this feature code.)...

/ INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
FEATURE NAME 
Conference 
CODE 
5 
Data 
Default Volumes 
Directories: 
System Directory 
CO. Directory 308 
Display Date and Time 
Do-Not-Disturb 370 
Cancel Do-Not-Disturb 371 
Do-Not-Disturb On/Off 372 
Feature Key Default 325 
Feature Key Programming 327 
Feature Key Display 326 
Handsfree Disable 
Handsfree Enable 
Headset Enable 315 
Headset Disable 316  340 
394 
307 
300 
310 
311 FEATURES 
Issue 2, May 1990 
DEFINITION 
Connects from...

FEATURES INTER-TEL PRACTICES 
Issue 2, May 1990 GMX-48 INSTALLATION & MAINTENANCE 
FFATURE NAME 
Hold: 
CODE DEFlNlTlOY 
Individual Hold 336 Places a call on hold so that it can be directly 
accessed only at that station or accessed through a 
reverse transfer from any other station. (HOLD 
key) 
System Hold 335 
(@sets only) Places an outside call on system hold. 
It can be picked up directly at any station that has 
allowed answer, ring in, or outgoing access to the 
line. (Cannot be used on intercom...

INTER-TEL PRACTICES FEATURES 
GMX-48 INSTALLATION & MAINTENANCE Issue 2, May 1990 
FEATURE NAME 
Page Remove 
Page Replace 
Private Call 
Program Redial Mode - 
Last Number Dialed 
Program Redial Mode - 
Last Number Saved 
Queue Request 6 
Cancel Queue Request 376 
Redial 380 
CODE 
332 
333 
369 
320 
321 
Reminder Message 
Cancel Reminder Message 
Reverse Transfer (Call Pick-Up) 305 
306 
4 
Ring Intercom Always 367 
Cancel Ring Intercom Always 368 
Select Ring Tone 328 
Speakerphone On/Off 312...

FEATURES 
Issue 2, May 1990 INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
FFATURE NAME 
CODE PFFINITIOM 
Station Speed Dial 
Program Station Speed Dial 
System Speed Dial 382 
383 
381 Dials/programs one of the 10 station speed-dial 
telephone numbers when followed by a location 
code (O-9). (Keysets use the SPD/BLF keys and 
SLIs use the STN SPD key) 
- 
Dials one of the 100 system or tenant-specific 
speed-dial telephone numbers when followed by a 
location code (00-99). Also used for...