Inter-Tel Glx Plus Issue 2 Installation And Field Maintenance Manual

FEATURES INTER-TEL PRACTICES 
Issue 2, June 1993 GLX-PLUS INSTALIATION & MAINTENANCE 
FIGURE 4-2. DATABASE REPORT FORMAT (Continued) 
SYSTEM FEATURES REPORT: 
------------------------------ top of page ---_-------------------------- 
Inter-Tel GLX-12 
Database Report - System Features 
System Timers: 
Attendant Recall 
Hold Recall 
Inactivity . . 
Call Forward Duration 
Call Forward Warning 
Call Forward No Answer 
Feature Timers: 
C.O. Flash 
C.O. Delay 
Speed-Dial Pause 
Memory-Dial Speed 
C.O. Ring...

INTER-TEL PRACTICES 
FEATURES 
GLX-PLUS INSTALLATION & MAINTENANCE 
Issue 2. June 1993 
FIGURE 4-2. 
DATABASE REPORT FORMAT (Continued) 
STATION FEATURES REPORT: 
------------------------------ top of page 
------------------------------ 
Inter-Tel GLX-12 
Database Report - Station Features 
Station 10 
Restricted Lines 
Ring-In Lines 
Options # 1: 
x,x,x,x,x,x 
# 2: 
x,x,x,x,x,x 
# 3: 
x,x,x,x,x,x,x,x 
. . . 
Station 21 
Restricted Lines 
# 1: 
x,x,x,x,x,x 
Ring-In Lines 
# 2: 
x,x,x,x,x,x 
Options 
#...

FEATURES 
Issue 2, June 1993 INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE 
FIGURE 4-2. DATABASE REPORT FORMAT (Continued) 
SPEED-DIAL NUMBERS REPORT: 
------------------------------ top of page ------------------------------ 
Inter-Tel GLX-12 
Database Report - Speed-Dial Numbers 
Station Speed-Dial Numbers 
Station 10 
1 = All digi;;s in speed-dial location appear, pauses are shown as P 
2 = 
3 = 
4= 
5 = 
6 = 
7 = 
8 = 
9 = 
. . . 
Station 21 
1 = 
2 = 
3= 
4 = 
5 = 
6 = 
7 = 
8 = 
9 =...

INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE FEATURES 
Issue 2, June 1993 
24. SYSTEM A’ITEINDANT STATION 
24.1 The system has one attendant. Intercom number 
10 is assigned to the system attendant’s keyset. The 
attendant station provides the following services: 
Can be called by dialing “0” 
Central operator for incoming calls 
Recall station for unanswered calls 
Places the system in night mode or day mode 
Programs the night security code 
Programs system speed-dial numbers 
Programs all...

FEATURES 
Issue 2, June 1993 INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE 
D. PROGRAMMIN G SYSTEM SPEED-DIAL 
NLJMBERS 
24.11 TO STORE OR CHANCE SYSTEM SPEED-DL4L NUM- 
BERS: 
NOTE: If you make a mistake while dialing the number, 
press any line key. If you press an invalid key or dial an 
invalid location code, you hear four fast tones and the 
keyset returns to the idle state. In either case, the original 
number is retained. 
(1) While on hook, press the SPDL key. The SPDL 
key flutters...

INTER-TEL PRACTICES PROGRAMMING 
GLX-PLUS INSTALLATION & MAINTENANCE Issue 2, June 1993 
PROGRAMMING 
CONTENTS PAGE 
1. Introduction ........................................................ 5-1 
2. Program Planning Sheets ............................................. 5-1 
3. Outline For Programming New Systems ................................ 5-l 
4. Initialize The System ................................................ 5-6 
. KSU Initialization ............................................... 5-6 
B. APM...

PROGRAMMING 
Issue 2, June 1993 INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE 
FIGURE 5-l. PROGRAM PLANNING SHEETS 
SYSTEM FEATURES 
Performed from the attendant’s keyset (intercom number 10). 
SYSTEM TIMERS: Enter numbers in seconds. If the timer is not desired, enter 0. 
Attendant Recall 
Hold Recall 
Inactivity 
Call Fwd to PN Dur. 
Call Fwd to PN Warn 
Call Fwd No Answer 
Make/break Ratio 
Pulse-dial Speed 
Pulse Interdigit 
m 
*11 
*12 
*13 
*14 
*15 
*16 
*31 
*32 
*33 180 seconds...

INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION % MAINTENANCE PROGRAMMING 
Issue 2, June 1993 
FIGURE 5-1. PROGRAM PLANNING SHEETS (Continued) 
SYSTEM OPTIONS: Enter desired option numbers. When the system is initialized, option 1 is preset. 
#5 
----- 
Options are as follows: 
Choose one: 
1 - Restrict calls beginning with 0 or 1. 
2 - Restrict calls beginning with 0 or 1 or >8 digits long. 
3 - Restrict calls beginning with 0 or 1 or ~8 digits long, but allow 1411, 1911, 1-555-xXxX, 
l-XXX-555-XXXX,...

PROGRAMMING 
Issue 2, June 1993 INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE 
FIGURE 5-1. PROGRAM PLANNING SHEETS (Continued) 
STATION FEATURES 
Performed at individual stations. (Place check marks in the appropriate boxes.) 
*Station options are as follows: 
1 - Incoming Page Disable 
2 - Ring Intercom First 
3 - Night Answer 
4 - Speakerphone Activation Pre-select Disable 
6 -Toll Restrict 
8 - Ringing Line preference - Automatic Access 
Page 5-4  

INTER-TEL PRACTICES 
GLX-PLUS INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, June 1993 
FIGURE 5-1. PROGRAM PLANNING SHEETS (Continued) 
APM FEATURES 
Performed at individual single-line stations using an industry-standard 2500 set. 
Each feature programming code is preceded by *09 (APM Database Programming Mode). 
FEATURE 
Call Waiting Tones (#lo no/#20 yes) 
Intercom Ring Cadence (#ll extended/#21 stan- 
dard) 
APY PORT Wl APM PORT #2 
Single-Line Minimum Hookflash Timer (#15 and 
range 01-10)...