InFocus Projector IN5132 User Manual

27
Operating
Selecting an aspect ratio
  For a computer signal 
IN5132, IN5142:  
  NORMAL  4:3  16:9  16:10 
         
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:  
 NORMAL  4:3  16:9  16:10  NATIVE 
       
  For a video signal, s-video signal or component video signal 
IN5132, IN5142:  
 4:3  16:9  14:9 
   
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:  
 4:3  16:9  16:10  14:9  NATIVE 
  
  
When there is no signal or an input signal from the LAN, USB TYPE A 
or USB TYPE B...

28
Operating
Adjusting the projector’s elevator
When the projector surface is slightly uneven to the 
left or right, use the elevator feet to place the projector 
horizontally. 
You can also tilt the projector using the feet to project at 
an appropriate angle to the screen, elevating the front 
side of the projector up to 9 degrees.
This projector has 2 elevator feet and 2 elevator buttons. 
To adjust an elevator foot, you must push the elevator 
button which is on the same side as it.
1. 
Holding the...

29
Operating
The ZOOM or FOCUS dialog will appear when you 
press any of the buttons from ZOOM, ZOOM -, 
ZOOM +, FOCUS + and FOCUS -. 
1. Use the ZOOM + / - buttons on the remote 
control or ZOOM button and ◄/► cursor buttons 
on the projector to adjust the screen size.
2. Use the FOCUS + / - buttons to focus the picture.
Adjusting the lens 
Adjusting the zoom and focus
• The projector may ignore button opera-
tions when the lens is moving.
NOTE
Press the LENS SHIFT button. The LENS SHIFT dia-
log will...

30
Operating
• The projector may ignore button operations when the lens is being 
moved.
• You can perform the LOAD function using the LENS MEMORY button.
NOTE
Adjusting the lens (continued)
This projector is equipped with memory functions for 
lens adjustments (LENS SHIFT and LENS TYPE). Up 
to 3 sets of adjustments can be saved.
To use the lens memory feature, press the POSITION 
or FUNCTION button while the LENS SHIFT dialog is 
displayed. Then the LENS MEMORY dialog will ap-
pear. The current lens...

31
Operating
1.Press the POSITION button on the remote control when no menu is 
indicated. The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture 
position.
When you want to reset the operation, press RESET 
button on the remote control during the operation.
To complete this operation, press POSITION button again. Even if you do not do 
anything, the dialog will automatically disappear after a few seconds.
1.Press the AUTO button...

32
Operating
AUTO:  performs an automatic vertical keystone 
correction. (54)
MANUAL:    allows you to adjust the vertical and horizontal 
keystone manually.
PERFECT FIT:   allows you to adjust each of the screen 
corners and sides to correct the 
distortion.
• The menu or dialog will automatically disappear after several seconds 
of inactivity. Press the KEYSTONE button again, or point the cursor at EXIT in 
the dialog and press the ►or the ENTER button to end the operation and close 
the menu or...

33
Operating
   PERFECT FIT: 
When PERFECT FIT is highlighted, pressing the 
► or ENTER button displays the KEYSTONE_
PERFECT FIT dialog.
This projector is equipped with a test pattern for 
PERFECT FIT. Select the test pattern icon  
shown in the lower left of the dialog with the ◄/▼ 
buttons. When you press the ENTER or INPUT 
button, the test pattern appears or disappears.
1. 
If it is necessary to initialize the current 
adjustment, point at RESET in the dialog 
with the RESET button, and press the...

34
Operating
Correcting the distortion (continued)
4. This projector is equipped with a memory feature for PERFECT FIT 
adjustment. Up to 3 sets of adjustments can be saved.
●  SAVE:  
To store the current PERFECT FIT adjustment, select one of the SAVE 
icons  numbered 1 to 3 (number of the memory options) with the ◄ /▲/▼ 
buttons and press the ENTER or INPUT button.  
Remember that the currently saved memory data will be lost when saving 
new data into the memory.
●  LOAD:  
To recall saved adjustments,...

35
Operating
1.
Using the magnify feature
2.
3.
4.
Press the MAGNIFY ON button on the remote 
control.  
The picture will be magnified, and the MAGNIFY 
dialog will appear on the screen. When the 
MAGNIFY ON button is pressed for the first time 
after the projector is turned on, the picture will be 
zoomed 1.5 times. On the dialog, triangle marks to 
show each direction will be displayed.
The projector's display magnification switches with every press 
of the MAGNIFY ON button.
  For computer...

36
Operating
1.Press the SHUTTER button on the control panel.
The mechanical lens shutter closes and the 
screen turns to black. The SHUTTER indicator 
on the projector blinks yellow while the shutter is 
closed.  
To open the shutter and restore the screen, press 
the SHUTTER button again.
Temporarily shutting the screen
• The projector will turn off automatically when the time set up by the 
SHUTTER TIMER passes (66).
• When turning off power normally, the lens shutter opens automatically. If AC...