InFocus Projector IN5132 User Manual

							Projector
IN5132/IN5132c/IN5142/IN5142c/IN5134/
IN5134a/IN5134c/IN5144/IN5144a/IN5144c/
IN5135/IN5135c/IN5145/IN5145c
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
NORSK
NEDERLANDS
PORTUGUÊS
c½
¿—¯i
SVENSKA
JMKKDBC
SUOMI
POLSKI
INDO 
BAHASA
User’s Manual (concise)
Please read this user’s manual thoroughly to ensure the proper use of this product.
Manuel d’utilisation (résumé)
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de 
lappareil.
Bedienungsanleitung (Kurzform)
Um zu gewährleisten, dass Sie die Bedienung des Geräts verstanden haben, lesen Sie dieses Handbuch 
bitte sorgfältig. 
Manual de usuario (resumen)
Lea atentamente el manual de usuario del proyector para garantizar un uso adecuado del mismo.
Manuale distruzioni (breve)
Vi preghiamo di leggere attentamente il manuale distruzioni per garantire una corretta comprensione delle 
istruzioni.
Brukerhåndbok (konsis)
Vennligst les denne brukerhåndbok grundig for å være garantert driftssikker bruk.
Gebruiksaanwijzing (beknopt)
Lees deze gebruikershandleiding grondig door, zodat u de werking ervan begrijpt en correct gebruik 
verzekerd is.
Instruções do proprietário (concisas)
Leia atentamente o presente manual do utilizador para garantir a utilização correcta por via da sua 
compreensão.
G
						

							NOTE

						

							1
ENGLISH
Projector
IN5132/IN5142/IN5134/IN5134a/
IN5144/IN5144a/IN5135/IN5145
Users Manual (concise)
Thank you for purchasing this projector.
Before using this projector, please read through this manual in order to use it 
safely.
WARNING
  
Afterwards, store the manuals in a safe place for future reference.
WKHSURGXFW

	
Safety Information .............................. 2
  Symbols and headings explanation .................. 2
  Important safety instruction .............................. 2
Regulatory notices .............................. 3
  About Electro-Magnetic Interference ................ 3
 
 About Waste Electrical and Electronic Equipment ... 4
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 7
)DVWHQLQJWKHDGDSWHUFRYHU ............... 8
Connecting power supply ................... 8
	
Turning on the power .......................... 9
Adjusting the projectors elevator ..... 10
Adjusting the lens position ................ 10
Displaying the picture ....................... 11
Turning off the power ........................ 12
Replacing the lamp ........................... 13
&OHDQLQJDQGUHSODFLQJWKHDLU¿OWHU .. 15
6SHFL¿FDWLRQV ................................... 17
Troubleshooting  
  - Warranty and after-service ........... 19
End User License Agreement for the 
Projector Software
 ............................20
Contents
NOTE
G³WKHSURGXFW´
means this projector and all the accessories came with the projector. 
						

							2
Safety Infor mation
Symbol and headings explanation
The following symbols and headings are used for the manuals and the product as fol-
lows, for safety purposes. Please review and head this important information.
Impor tant safety instructions
The following instructions are designed to ensure the safe use of this product. 
Always follow these instructions when handling the product. The manufacturer 
assumes no responsibility for any damage caused by mishandling that is beyond 
QRUPDOXVDJHGH¿QHGLQWKHVHSURMHFWRUPDQXDOV
WARNING
   This warns of a serious risk of personal injury or even death.
CAUTION
     This warns of a risk of personal injury or physical damage.
     NOTICE
     This warns of a potential for causing problems.
WARNING
 
yNever use the product during or after an abnormal situation (for 
example, when the projector is smoking, smells strange, had a liquid spilled on it, 
had an object put inside it, is broken, etc.). If an abnormality should occur, unplug 
the projector immediately. 

yKeep the product away from children and pets.
OORZHGFRQVXOWD
physician immediately for emergency treatment.

yDo not use the product when there is a threat of thunder and lightening.

yUnplug the projector from the power outlet when it is not in use.

y
Do not connect the projector to a power supply when a lens unit is not attached to it.

yDo not open or remove any portion of the product, unless the manuals direct 
you so. Internal maintenance should only be accomplished by your dealer or their 
service personnel.
FWXUHU

yDo not modify the projector or accessories.

yDo not let any liquid or objects get inside of the product.

yDo not get the product wet.

y
Do not place the projector where any oils, such as cooking or machine oil, are used. Oil 
may harm the product, resulting in a malfunction, or falling from mounted position.

yDo not apply a shock or pressure to this product.
-  Do not place the product on an unstable place such as an uneven surface or a 
leaning table.
-  Do not place the product in an unstable position. Place the projector so that it 
does not protrude from the surface which it is placed on.
-  Hold the projector using the grips on the bottom of the projector when moving it.
-  Remove all the attachments including the power cord and cables from the 
projector before carrying the projector.

y
Do not look into the lens or openings of the projector, while the lamp is on.

yStay away from the lamp cover and exhaust vents when the projection lamp is on and 
when the lamp has just gone out since they will be very hot.  
						

							3
ENGLISH
Regulator y notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.
This product may cause interference if used in residential areas. Such use must 
be avoided unless the user takes special measures to reduce electromagnetic 
emissions to prevent interference to the reception of radio and television 
broadcasts.
In Canada
This Class A digital apparatus complies with Canadian ICES-003.
In the US and places where the FCC regulations are applicable
VVXEMHFW
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 
This equipment has been tested and found to comply with the limits for a 
&ODVV$GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV
These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential 
area is likely to case harmful interference in which case the user will be required to 
correct the interference at his own expense.
INSTRUCTIONS TO USERS: 
Some cables have to be used with a ferrite 
HFRQQHFWLRQ)RU
cables that have a ferrite core on a single end, connect the ferrite core end to the 
projector.
CAUTION: 

responsible for compliance could void the user’s authority to operate the 
equipment. 
						

							4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Contact your dealer immediately if any 
items are missing.
(1) Remote control (batteries not included)
(2) Power cord 
(3) Computer cable
(4)  Lens cover
(5)  User’s manual (Book x 1)
(6) Adapter  cover
NOTE8VHWKH
original packing materials when moving the projector. Use special caution for 
the lens. 

						

							5
ENGLISH
Preparing for the remote control
Please insert batteries (batteries not included) into the remote control before using 
DWWHULHV¿UVW5HPRYH
the batteries from the remote control and store them in a safe place when the 
remote will not be used for a length of time.
1.
 Holding the hook part of the battery 
cover, remove it.
2. Align and insert two AA batteries 
(HITACHI MAXELL or HITACHI 
MAXELL ENERGY, Part No.LR6 or 
R6P
) according to their plus and minus 
terminals as indicated in the remote 
control.
3. Replace the battery cover in the direction of the arrow and snap it back into 
place.
WARNING
  
y
Always handle the batteries with care and use them only as 
directed. Improper use may result in battery explosion, cracking or leakage, 
XQGLQJHQYLURQPHQW
‡ 
When replacing the batteries, replace both of the batteries with new batteries 
of the same type. Do not use a new battery with a used battery.
‡ 
2QO\XVHWKHEDWWHULHVVSHFL
						

							6
WARNING  
yInstall the projector where you can access the power outlet 
easily.

yInstall the projector in a stable horizontal position.
‡ 
L¿HGE\WKH
manufacturer. Read and keep all accessory manuals.
‡ 
UGHDOHU
TXLUHG
‡RQRWSosition the projector on its side, front or rear.
‡VHVSHFL¿HGLQ
the manual.
DEOHitems.

yDo not place the projector where any oils, such as cooking or machine oil, are 
used.

yDo not place the projector in a place where it may get wet.
CAUTION
  
‡ 
Keep a space of 30 cm or more between the side of the projector and other 
objects such as walls.
‡ 
Do not plug, block or cover the projectors ventilation holes.
‡ 
LF¿HOGVRLQJ
so can cause the cooling fans inside the projector to malfunction.

yAvoid placing the projector in smoky, humid or dusty places.
‡ 
RQRWSODFHWKHSURMHFWRUQHDUKXPLGL¿HUV
NOTICE
  
yPosition the projector to prevent light from directly hitting the 
projector’s remote sensor.

yDo not place the product in a place where radio interference may be caused.

yVerify the ALTITUDE setting in the OPTION>SERVICE menu is correct. 
Under normal circumstances, it is recommended that it be set to AUTO. If the 
projector is using the wrong setting, it may cause damage to the projector itself 
or to the parts inside.)RUdetails, see User’s Manual - Operating Guide
.
Arrangement
Refer to the following table and to tables T- 1 to T- 5 at the back of this manual to 
determine screen size and projection distance. The values shown in the table are 
calculated for a full size screen.
Projector top
Projector bottom

						

							7
ENGLISH
Connecting with your devices
Before connecting the projector to a device, review the device manual to ensure 
projector compatibility and to understand what accessories are needed for 
connection. Consult your dealer when the required accessory did not come with the 
product or the accessory is damaged.
After verifying that the projector and the devices are turned off, connect the 

gures F-1 to F-4 at the 
back of this manual.
)RUGHWDLOVVHHUser’s Manual - Operating Guide. Before connecting the 
projector to a network system, read User’s Manual - Network Guide too. 
WARNING  -
tor and device damage may occur.
‡RU
						

							8
Connecting power supply
1. Plug the power cord into the AC IN
 (AC inlet) 
connector of the projector.
2. )LUPO\SOXJWKHSRZHUFRUG