InFocus Projector IN5132 User Manual

							9
ENGLISH
Tur ning on the power
1. WRWKH
projector and the outlet.
2. Make sure that the POWER
 indicator is 
steady orange. Then remove the lens 
cover.
3. Press the STANDBY/ON
 button on 
the projector or the ON
 button on the 
remote control.
The projection lamp will light up and the 
POWER
 indicator will begin blinking green. 
When the power is completely on, the 
indicator will stop blinking and become 
steady green.
WARNING
  
y$VWURQJOLJKWLVHPLWWHGZKHQWKHSURMHFWRU
						

							10
Adjusting the projector’s elevator
When the projector is placed on a slightly uneven surface, 
use the elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project 
at a suitable angle (up to 9 degrees) to the screen.
This projector has 2 elevator feet and 2 elevator buttons. 
An elevator foot is adjustable when you push the elevator 
button which is on the same side.
1. 
Holding the projector, push the elevator buttons to 
loosen the elevator feet.
2. 
Position the front side of the projector to the desired 
height.
3. 
Release the elevator buttons in order to lock the 
elevator feet.
4. 
After verifying that the elevator feet are locked, put 
the projector down gently.
5. 
If necessary, the elevator feet can be manually   
twisted to make more precise adjustments. Hold the 
projector when twisting the feet.
Adjusting the lens position
Shifting the lens position shifts the projection 
position. 
After pressing the LENS SHIFT
 button on the 
control panel or the remote control, use the 
cursor buttons to shift the lens position.
CAUTION
  
yRQRWSXW\RXU¿QJHUVRUDQ\RWKHU
items around the lens. The moving lens could pinch 
them in the space around the lens and cause injury.
NOTE‡The projector may ignore button operation when the lens is moving.

						

							11
ENGLISH
Displaying the picture
1. Activate your signal source. Turn the signal 
source on, and send the signal to the projector.
2. Press the INPUT
 button on the projector.  
Each time you press the button, the projector 
switches its input port in turn. 
You can also use the remote control to select 
an input signal. Press any of the buttons from 
COMPUTER 1
 / 2
, LAN
, USB TYPE A
 / B
, 
HDMI 1
 / 2
, COMPONENT
, S-VIDEO
 or 
VIDEO
 to select the input signal from each 
port.
3. Use the VOL + / -
 buttons to adjust the volume. 
4. Press the ASPECT
 button on the remote control. 
Each time you press the button, the projector 
switches the mode for aspect ratio in turn.
5. Use the ZOOM
 + / - 
buttons on the remote 
control or ZOOM 
EXWWRQDQG
{
yFXUVRUEXWWRQV
on the projector to adjust the screen size.
6. Use the FOCUS
 + / - 
buttons on the projector or 
the remote control to focus the picture.
CAUTIONSLV
on, use the lens shutter or AV MUTE function (see User’s Manual - Operating 
Guide). Taking any other action may cause the damage on the projector.
NOTE‡The ASPECT button does not work when no proper signal is inputted.
User’s Manual - 
Operating Guide. 
VOL + / -
 
buttons
ASPECT
 
button
Buttons for input portsINPUT
 button
FOCUS -
 / +
 buttons
ZOOM
 button
ZOOM +
 / -
 
buttons
FOCUS +
 / -
 
buttons 
						

							12
Tur ning off  the power
1. Press the STANDBY/ON
 button on the 
projector or the STANDBY
 button on 
the remote control. 
7KHPHVVDJH
						

							13
ENGLISH
Replacing the lamp
$ODPSKDVD
						

							14
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING
  
yThe projector uses a high-pressure mercury glass lamp. The 
lamp may burn out or rupture with a loud bang if the lamp is jolted or scratched, 
handled while hot, or worn over time. Note that each lamp has a different 
lifetime, and some may rupture or burn out soon after you start using them. In 
DVVWRÀ\LQWRWKHODPS
SDUWLFOHVRI
glass to escape from the projector’s vent holes.

yAbout disposal of a lamp: This product contains a mercury lamp; do not put 
it in a trash. Dispose of it in accordance with environmental laws. 
‡)RUODPSUHF\FOLQJJRWRwww.lamprecycle.org (in the US).
‡ 
or www.eiae.org (in the US) or www.epsc.ca (in Canada).
)RUPRUHLQIRUPDWLRQDVN\RXUGHDOHU

						

							15
ENGLISH
Please check and cleDQWKHDLU
						

							16
NOTE  ODFHG
WKHDLU¿OWHUWRHQVXUHSURSHUDLU¿OWHUPHVVDJHV

						

							17
ENGLISH
Item6SHFL¿FDWLRQ
Product name Liquid crystal projector
Liquid Crystal 
Panel
IN5132, IN5142:  
786,432 pixels (1024 horizontal x 768 vertical)
IN5134, IN5134a, IN5144, IN5144a:  
1,024,000 pixels (1280 horizontal x 800 vertical)
IN5135, IN5145:  
2,304,000 pixels (1920 horizontal x 1200 vertical)
LampIN5132, IN5134, IN5134a, IN5135: 245W UHP
IN5142, IN5144, IN5144a, IN5145: 330W UHP
Speaker8 W x2
Power supply, 
Rated current
IN5132, IN5134, IN5134a, IN5135: 
AC100-120 V: 3.8 A, AC220-240 V: 1.9 A
IN5142, IN5144, IN5144a, IN5145:  
AC100-120 V: 4.9 A, AC220-240 V: 2.4 A
Power 
consumption
IN5132, IN5134, IN5134a, IN5135: 
AC100-120 V: 375 W, AC220-240 V: 355 W
IN5142, IN5144, IN5144a, IN5145:  
AC100-120 V: 480 W, AC220-240 V: 455 W
Temperature 
range
IN5132, IN5134, IN5134a, IN5135:  
0 ~ 40 °C (Operating)
IN5142, IN5144, IN5144a, IN5145:  
0 ~ 45 °C (Operating)
* When the projector is used at high altitudes, even with 
the IN5142, IN5144, IN5144a or IN5145, the service life 
of the optical components may be reduced by peripheral 
temperatures of over about 40°C. It is recommended to 
reduce the temperature as far as possible.
Size
498 (W) x 135 (H) x 396 (D) mm

1RWLQFOXGLQJSURWUXGLQJSDUWV5HIHUWR¿JXUHF-5 at the back 
of this manual.
Weight (mass)
IN5132, IN5134, IN5134a: approx. 8.3 kg
IN5135: approx. 8.6 kg
IN5142, IN5144, IN5144a, IN5145: approx. 8.7 kg
(continued on next page)
6SHFL
						

							18
Item6SHFL¿FDWLRQ
Ports
COMPUTER IN1  ..........................  D-sub 15 pin mini jack x1
COMPUTER IN2 (H, V, G/Y, B/Cb/Pb, R/Cr/Pr)  ...  BNC jack x5
HDMI 1  ...................................................  HDMI connector x1
HDMI 2  ...................................................  HDMI connector x1
MONITOR OUT  ............................. D-sub 15 pin mini jack x1
COMPONENT (Y, Cb/Pb, Cr/Pr)  .......................  RCA jack x3
S-VIDEO  .............................................  Mini DIN 4 pin jack x1
VIDEO  ...............................................................  RCA jack x1
AUDIO IN1  ............................... 3.5 mm (stereo) mini jack x1
AUDIO IN2  ............................... 3.5 mm (stereo) mini jack x1
AUDIO IN3 (L, R)  ..............................................  RCA jack x2
AUDIO OUT (L, R)  ............................................  RCA jack x2
USB TYPE A  .................................  USB type A connector x2
USB TYPE B  ................................. USB type B connector x1
CONTROL  ..............................................  D-sub 9 pin plug x1
LAN  ..................................................................  RJ45 jack x1
REMOTE CONTROL IN  ...........  3.5 mm (stereo) mini jack x1
REMOTE CONTROL OUT  .......  3.5 mm (stereo) mini jack x1
Optional parts
L amp:  
   
SP-LAMP-080   
SP-LAMP-081 
F ilter set:  
63),/7(5 
63),/7(5
L ens unit:  /(16)L[HGVKRUWWKURZOHQV 
LENS-070 (Short throw lens) 
LENS-071 (Middle throw lens) 
LENS-072 (Long throw lens) 
LENS-073 (Ultra long throw lens)
USB wireless adapter: SP-DONGLE-USB

)RUPRUHLQIRUPDWLRQSOHDVHFRQVXOW\RXUGHDOHU6SHFL¿FDWLRQVFRQWLQXHG