InFocus Projector IN5132 User Manual
Have a look at the manual InFocus Projector IN5132 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
77 NETWORK menu ItemDescription WIRELESS SETUP(continued) DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/off. ON ó OFF Select OFF when the network does not have DHCP enabled. To save the setting, press the ► button. • When DHCP changes to ON, it takes a little time to obtain the IP address from DHCP server.• Auto IP function will assign an IP address if the projector cannot obtain an IP address from the server even if DHCP is ON. IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.• The IP ADDRESS 0.0.0.0 is prohibited. SUBNET MASK Use the ▲/▼/◄/► buttons to enter the SUBNET MASK used by your computer. This function can only be used when DHCP is OFF. • The SUBNET MASK 0.0.0.0 is prohibited. DEFAULT GATEWAY Use the ▲/▼/◄/► buttons to enter the DEFAULT GATEWAY (a node on a computer network that serves as an access point to another network) address.This function can only be used when DHCP is OFF. DNS SERVER Use the ▲/▼/◄/► buttons to input the DNS server address. The DNS server is a system to control domain names and IP addresses on the Network. TIME DIFFERENCE Use the ▲/▼ buttons to enter TIME DIFFERENCE. Set TIME DIFFERENCE to match your computer. If you are unsure what to enter, contact your IT manager. Use the ► button to return to the menu after setting TIME DIFFERENCE. • When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (82). (continued on next page)
78 NETWORK menu ItemDescription WIRELESS SETUP(continued) DATE AND TIME Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hours and Minutes. • When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (82). • When SNTP is enabled, the projector will override this setting and retrieve DATE AND TIME information from the Time server. (3.1.8 Date/Time Settings in the Network Guide)• If STANDBY MODE in the SETUP menu is set to SAVING and the projector is turned off (or AC power is turned off), this setting will be reset.(56). CH Use the ▲/▼ buttons to select the wireless LAN channel to be used when MODE (76) is set to ADHOC. Select the item based on your computer settings.The channels 1 to 11 are available. To save the setting, press the ► button. • Available channels will vary per country. In addition, a wireless network card may be required based on the country.• This item can only be selected when MODE is set to ADHOC. When MODE is set to INFRASTRUCTURE, the channel is automatically selected. ENCRYPTION Use the ▲/▼ buttons to select the encryption method to be used. WPA2-PSK(AES) ó WPA2-PSK(TKIP) OFF WPA-PSK(AES) WEP 64bitóWEP 128bitóWPA-PSK(TKIP) To save the setting, press the ► button. • When MODE (76) is set to ADHOC, WPA-PSK and WPA2-PSK are disabled.• If IEEE802.11 n is used while MODE is set to INFRASTRUCTURE, TKIP and WEP are disabled. Communication will switch automatically to IEEE802.11 b/g unless OFF or AES is selected. (continued on next page)
79
NETWORK menu
ItemDescription
WIRELESS SETUP(continued)SSID
Use the ▲/▼ buttons to select the SSID to display the SSID menu.
#1 DEFAULT ó #2 DEFAULT ó #3 DEFAULT
#5 CUSTOM ó #4 DEFAULT
Select DEFAULT (#1~#4) and press ► or the ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when #5 CUSTOM is selected. The SSID #5 CUSTOM menu will appear.
(1) The current SSID will be displayed on the first line. If nothing has been entered yet, the line will be blank. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button simultaneously. You can also highlight DELETE or ALL CLEAR on the screen and press the ENTER or INPUT button to erase 1 character at a time or all of the characters. The SSID can be up to 32 characters.
(2) To change an existing character, press the ▲/▼ button to move the cursor to one of the first 2 lines, and use the ◄/► buttons to highlight the character to be changed. After pressing the ENTER or INPUT button, the character is selected. Then, repeat item (1) above.
(3) When finished entering text, move the cursor to OK and press the ►, ENTER or INPUT button. To keep the previous name without saving the changes, move the cursor to CANCEL and press
the ◄, ENTER or INPUT button.
(continued on next page)
80 NETWORK menu ItemDescription WIRELESS INFORMATION Select this to display the WIRELESS INFORMATION dialog to view the wireless LAN settings. Use the ▲/▼ buttons to switch the page.The first page shows the wireless LAN settings. The second and subsequent pages display the wireless LAN connection devices signal information • For PASSCODE details, refer to the LiveViewer manual. • Nothing (blank) is shown in the PROJECTOR NAME (83) and SSID (79) field until you setup those items. Only the first 16 characters of the PROJECTOR NAME will be displayed.• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate 0.0.0.0 under the following conditions:(1) The USB wireless adapter is not inserted into the projector.(2) DHCP is ON and the projector did not receive an address from the DHCP server.• Nothing (blank) is shown in the CH and SPEED fields if the USB wireless adapter is not inserted.• The CH field will display actual performance and setting information instead of in the WIRELESS SETUP menu.• An icon is displayed to the left of the device SSID connected to the projector. (continued on next page)
81 NETWORK menu ItemDescription WIRED SETUP Select this to display the WIRED SETUP menu for the wired LAN.Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/off. ON ó OFF Select OFF when the network does not have DHCP enabled. To save the setting, press the ► button. • When the DHCP setting changes to ON, it will take some time to obtain IP address from DHCP server.• Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is ON. IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.• The IP ADDRESS 0.0.0.0 is prohibited. SUBNET MASK Use the ▲/▼/◄/► buttons to enter the same SUBNET MASK used by your computer. This function can only be used when DHCP is OFF. • The SUBNET MASK 0.0.0.0 is prohibited. DEFAULT GATEWAY Use the ▲/▼/◄/► buttons to enter the DEFAULT GATEWAY (a node on a computer network that serves as an access point to another network) address.This function can only be used when DHCP is OFF. DNS SERVER Use the ▲/▼/◄/► buttons to input the DNS server address. The DNS server is a system to control domain names and IP addresses on the Network. (continued on next page)
82 NETWORK menu ItemDescription WIRED SETUP(continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the TIME DIFFERENCE to match your computer. If you are unsure what to enter, contact your IT manager. Use the ► button to return to the menu after setting TIME DIFFERENCE. • When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (77). DATE AND TIME Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hours and Minutes. • When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (78). • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. (3.1.8 Date/Time Settings in the Network Guide)• If STANDBY MODE in the SETUP menu is set to SAVING and the projector is turned off (or AC power is turned off), this setting will be reset.(56). WIRED INFORMATION Select this to display the WIRED INFORMATION dialog to view the wired LAN settings. • For more details about PASSCODE, refer to the LiveViewer manual. • Only the first 16 characters of the PROJECTOR NAME are displayed.• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate 0.0.0.0 when DHCP is ON and the projector has not received an address from DHCP server. (continued on next page)
83 NETWORK menu ItemDescription PROJECTOR NAME (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. A projector name will be pre-assigned by default. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters.To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button simultaneously. Also if you highlight DELETE or ALL CLEAR and push the ENTER or INPUT button, you can erase one character or all characters at a time.The PROJECTOR NAME can be up to 64 characters. (3) To change an existing character, press the ▲/▼ button to move the cursor to one of the first 3 lines, and use the ◄/► buttons to highlight the character to be changed. After pressing the ENTER or INPUT button, the character is selected. Then, repeat item (2) above. (4) To finish entering text, move the cursor to OK and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to CANCEL and press the ◄, ENTER or INPUT button. (continued on next page)
84 NETWORK menu ItemDescription MY IMAGE Select this to display the MY IMAGE menu. Use the application to transfer the image data. It can be downloaded from the InFocus website.(www.infocus.com/support). Use the ▲/▼ buttons to select a still MY IMAGE image (4. My Image Function in the Network Guide) and the ► or ENTER button to display the image. • If no images have been saved, you cannot select an image.• Only 16 characters of the image names can be displayed. To switch the displayed image Use the ▲/▼ buttons. To return to the menu Press the ◄ button on the remote control. To erase the displayed image and its source file in the projector. (1) Press the RESET button on the remote control while displaying the image in the MY IMAGE DELETE menu. (2) Press the ► button to perform to erase. To keep the image, press the ◄ button. AMX D.D.(AMX Device Discovery) Use the ▲/▼ buttons to turn the AMX Device Discovery on/off. ON ó OFF When ON is selected, the projector can be detected by AMX controllers connected to the same network. More information about AMX Device Discovery, visit the AMX website. URL: http://www.amx.com/ (as of Feb. 2012) (continued on next page)
85 NETWORK menu ItemDescription PRESENTATION Select this to display the PRESENTATION menu.Use ▲/▼ buttons to select one of the following items, then press ► or the ENTER button to use the function. • To use Network Presentation, an exclusive application, LiveViewer is required. It can be installed from the bundled application CD. You can also download the latest version and relevant information from the InFocus website (www.infocus.com/support). For more details about Network Presentation and instructions to install the LiveViewer, refer to the LiveViewer manual. QUIT PRESENTER MODE If you set a computer to Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is blocked.Use this function to quit Presenter mode and allow other computers to access the projector.Select this item to display a dialog.Press ► button to choose OK in the dialog. Presenter mode is cancelled and a message is displayed indicating the result.• To choose a Presenter mode setting, use LiveViewer.For details, refer to the LiveViewer manual. MULTI PC MODE If you set one or more computers to the Multi PC mode on LiveViewer and send their images to the projector, you can select the display mode on the projector from the two options below. - Single PC mode: displays the image of a single computer on full screen.- Multi PC mode: displays up to four computer images by dividing the screen into quarter sections.Select this item to display a dialog. Use the dialog to change the display mode as explained below.• To change from Multi PC mode to Single PC mode, select one of computers in the dialog using the ▲/▼/◄/► buttons and press the ENTER or INPUT button.Press the ► button to choose OK, and then press ENTER or INPUT again. The image for the selected computer is displayed on full screen. (continued on next page) (continued on next page)
86 SECURITY menu ItemDescription PRESENTATION(continued) MULTI PC MODE(continued) • To change from Single PC mode to Multi PC mode, press ► button to choose OK in the dialog and press the ENTER or INPUT button.The display mode will change.• For details on how to switch the display mode to Multi PC mode on your computer, refer to the LiveViewer manual.• The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode. The Presenter mode setting is unavailable when the display mode changes to Multi PC mode, regardless of the computer settings.For details, refer to the LiveViewer manual. DISPLAY USER NAME Select this to display the user name. This function helps you identify which computer is sending the current image.• You can choose a user name for each computer in LiveViewer. For details, refer to the LiveViewer manual. SERVICE Executing this item restarts and initializes the network functions.Choose the NETWORK RESTART EXECUTE using the button ►. Then use the button ► to execute. When you choose restart, network communciation will be cut off.If DHCP is ON, the IP address may change.After selecting NETWORK RESTART EXECUTE, the NETWORK menu may not be available for approximately 30 seconds.