InFocus Projector IN5132 User Manual

67
OPTION menu
ItemDescription
USB TYPE B
Using the ▲/▼ buttons selects the function of USB TYPE B port.  To use this function, you need to connect the projector's USB TYPE B port to the computer's Type A USB port.
MOUSE ó USB DISPLAY
MOUSE:  
The remote control works like a simple mouse and keyboard for the computer.USB DISPLAY:  
The port will receive image input signals from the computer (104).• It may take several seconds to project the images from the USB TYPE B port.• In the following...

68
OPTION menu
ItemDescription
MY BUTTON
This item assigns one of the following functions to MY BUTTON (1 to 4) on the remote control (6).
(1)  Use the ▲/▼ buttons on the MY BUTTON menu to select a button from MY BUTTON - 1 to 4 and press the ► or ENTER button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► buttons highlight one of the following functions for the chosen button. Press the ENTER or INPUT button to save the setting.
SLIDESHOW: Selects the USB TYPE A port  input  and...

69
OPTION menu
ItemDescription
SERVICE
Select this to display the SERVICE menu.Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to perform this item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling fans. We recommend leaving it set to AUTO under most circumstances
HIGH-2 ó HIGH-1 ó NORMAL ó AUTO 
AUTO:  
The projector changes the rotation speed automatically to accomodate for altitude and other environmental factors. When...

70
OPTION menu
ItemDescription
SERVICE(continued)
FILTER MESSAGE
Use the ▲/▼ button to set the notification timer for displaying a message to replace the filter unit 
IN5132, IN5134, IN5134a, IN5135: 1000h ó 2000h ó 5000h ó 10000h ó 15000h ó OFF
IN5142, IN5144, IN5144a, IN5145: 1000h ó 2000h ó 5000h ó 10000h ó 15000h ó 20000h ó OFF
After choosing any item except OFF, the message “REMINDER *** HRS PASSED....” will appear after the timer reaches the time intervals set by this feature (11 4). When OFF is...

71
OPTION menu
ItemDescription
SERVICE(continued)
KEY LOCK
(1)  Use the ▲/▼ buttons to choose the control option.
CONTROL PANEL ó REMOTE CONTROL
(2)  Use the ◄/► buttons to select ON or OFF.
ON ó OFF
Selecting ON in Step 2 locks all the buttons except STANDBY, ON and STANDBY/ON for the control option selected in Step 1. Selecting OFF releases the locked buttons on the control option selected in Step 1.• Use this function to prevent tampering and accidental operation. • It is not possible to disable both...

72
OPTION menu
ItemDescription
SERVICE(continued)COMMUNICATION
Selecting this item displays COMMUNICATION menu. In this menu, you can configure the projector's serial communication settings using the CONTROL port.
• Select an item using the cursor buttons ▲/▼. Then press the ► button to open the submenu for setting the item you selected. Or, press the ◄ button instead of the ► button to go back to the previous menui without changing the setup. Each submenu can be operated as described above.• When...

73
OPTION menu
ItemDescription
SERVICE(continued)COMMUNICATION(continued)
SERIAL SETTINGS
Select the CONTROL port serial communication settings.
BAUD RATE
4800bps ó 9600bps ó 19200bps ó 38400bps      
 PARITY
NONE ó ODD ó EVEN    
• When the COMMUNICATION TYPE is OFF (72), the BAUD RATE is set to 19200bps and PARITY is set NONE.
TRANSMISSION METHOD
Select the NETWORK BRIDGE communication transmission method for the CONTROL port.
HALF-DUPLEX ó FULL-DUPLEX
HALF-DUPLEX: This method allows the projector to...

74
OPTION menu
ItemDescription
SERVICE(continued)COMMUNICATION(continued)
RESPONSE LIMIT TIME
Select the time period which the projector should wait to receive response data from a device communicating using the NETWORK BRIDGE and HALF-DUPLEX methods via the CONTROL port.
OFF ó 1s ó 2s ó 3s    
OFF: Select this mode if the responses from the device do not need to be monitored. In this mode, the projector can send data out to the computer continuously.
1s /2s /3s: Select the time period which the...

75
OPTION menu
ItemDescription
SERVICE(continued)
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the COMPONENT ports are working as a SCART RGB input port. Refer to the COMPONENT item in the INPUT menu (50).• This item cannot be selected when there is no signal or sync out.• When MY TEXT DISPLAY is ON, MY TEXT is...

76
NETWORK menu
Remember that incorrect network settings on this 
projector may cause network problems. Contact your 
network administrator before connecting to an existing 
access point on the network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button on the projector or 
remote control, or the ENTER button on the remote control to perform this item. 
Then follow the...