InFocus Projector IN5132 User Manual

57
AUDIO menu
AUDIO menu
From the AUDIO menu, you can perform the items 
shown in the table below. Select an item using the ▲/▼ 
cursor buttons, and press the ► cursor button or the 
ENTER button to perform this item. Then follow the 
instructions below. 
ItemDescription
VOLUMEUsing the ◄/► buttons adjusts the volume.
Low ó High
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON ó OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
While the image signal from the...

58
AUDIO menu
ItemDescription
HDMI AUDIO
The HDMITM audio mode for the HDMI 1 and 2 ports can be chosen.
(1)  Use the ▲/▼ buttons to select the HDMI port to be set.
(2)  Use the ◄/►buttons to select the mode of HDMITM audio.Check each of the modes provided and select the suitable one for your HDMITM audio device. 

59
SCREEN menu
SCREEN menu
From the SCREEN menu, you can perform the items 
shown in the table below.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or the ENTER button to 
perform this item. Then follow the instructions below.
ItemDescription
LANGUAGE
Using the ▲/▼/◄/► buttons switches the OSD (On Screen Display) language.
ENGLISH ó FRANÇAIS ó DEUTSCH ó  ESPAÑOL         (shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language setting.
MENU...

60
SCREEN menu
ItemDescription
MyScreen
This item allows you to capture a personal MyScreen image which can be used as the BLANK or START UP screen. Display the image you want to capture before accomplishing the following steps.
(1)  Selecting this item displays a dialog titled “MyScreen”. It will ask you if you want to capture the current screen for your MyScreen image.Please wait until the target image is displayed, and press the ENTER or INPUT button. The image will freeze and the frame for capturing...

61
SCREEN menu
ItemDescription
MyScreen Lock
Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON ó OFF
When ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.
• This function cannot be selected when ON is selected to the MyScreen PASSWORD item in SECURITY menu (88).
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
ON ó OFF
When ON is selected, the following messages will appear:
“AUTO IN PROGRESS” while automatically...

62
SCREEN menu
ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1)  Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button.  The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed. The right side of the menu will remain blank until a name is specified.
(3)  Select an icon you would like to...

63
SCREEN menu
ItemDescription
SOURCE NAME
(continued)
(6)  
The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at a time, press the RESET button or press the ◄ and INPUT button simultaneously. Also if you highlight DELETE or ALL CLEAR on screen and press the ENTER or INPUT button, you can erase one character or all characters at a time. The name can be up to 16 characters.
(7)  
To change an...

64
SCREEN menu
ItemDescription
C.C.(Closed Caption)
C.C. displays a transcript or dialog of the audio portion of videos, files and other presentations, including relevant sounds. An NTSC format video or a 480i@60 format component video source supporting closed captioning is required to use this function.Depending on the signal source and the equipment being used, this function may not work properly. In this case, turn off Closed Captioning.
DISPLAY
Select the Closed Captioning DISPLAY option using ▲/▼...

65
OPTION menu
OPTION menu
From the OPTION menu, you can perform the items 
shown in the table below. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or the ENTER button to 
perform this item, except items LAMP TIME and 
FILTER TIME. Then follow the instructions below.
ItemDescription
SOURCE SKIP
Ports can be ignored by the AUTO SEARCH function (below) and when using buttons on the control panel. 
(1)  Choose a picture input port using the ▲/▼ buttons.
(2)  Using the...

66
OPTION menu
ItemDescription
DIRECT POWER ON
Using the ▲/▼ buttons turns the DIRECT POWER ON function on/off,
ON ó OFF
When this function is ON, the lamp inside the projector will automatically turn on when the projector is supplied with power instead of following the usual procedure (24).
• After the lamp is turned on using the DIRECT POWER ON function and the 30 minutes have lapsed without a signal source input or any user operation, the projector will turn off, even when the AUTO POWER OFF function...