InFocus Projector IN5132 User Manual

77
NETWORK menu
ItemDescription
WIRELESS SETUP(continued)
DHCP  (Dynamic Host Configuration Protocol)
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
Select OFF when the network does not have DHCP enabled. To save the setting, press the ► button.
• When DHCP changes to ON, it takes a little time to obtain the IP address from DHCP server.• Auto IP function will assign an IP address if the projector cannot obtain an IP address from the server even if DHCP is ON.
IP ADDRESS
Use the ▲/▼/◄/► buttons to...

78
NETWORK menu
ItemDescription
WIRELESS SETUP(continued)
DATE AND TIME
Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hours and Minutes.
• When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (82). • When SNTP is enabled, the projector will override this setting and retrieve DATE AND TIME information from the Time server. (3.1.8 Date/Time Settings in the Network Guide)• If STANDBY MODE in the SETUP menu is set to SAVING and...

79
NETWORK menu
ItemDescription
WIRELESS SETUP(continued)SSID
Use the ▲/▼ buttons to select the SSID to display the SSID menu.
#1 DEFAULT ó #2 DEFAULT ó #3 DEFAULT
       #5 CUSTOM ó #4 DEFAULT 
Select DEFAULT (#1~#4) and press ► or the ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when #5 CUSTOM is selected. The SSID #5 CUSTOM menu will appear.
(1)  The current SSID will be displayed on the first line. If nothing has been entered yet, the line will be blank. Use the ▲/▼/◄/► buttons and the...

80
NETWORK menu
ItemDescription
WIRELESS INFORMATION
Select this to display the WIRELESS INFORMATION dialog to view the wireless LAN settings. Use the ▲/▼ buttons to switch the page.The first page shows the wireless LAN settings. The second and subsequent pages display the wireless LAN connection devices signal information
• For PASSCODE details, refer to the LiveViewer manual. 
• Nothing (blank) is shown in the PROJECTOR NAME (83) and SSID (79) field until you setup those items. Only the first 16...

81
NETWORK menu
ItemDescription
WIRED SETUP
Select this to display the WIRED SETUP menu for the wired LAN.Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.
DHCP  (Dynamic Host Configuration Protocol)
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
Select OFF when the network does not have DHCP enabled. To save the setting, press the ► button.
• When the DHCP setting changes to ON, it will take some time to obtain IP address from DHCP server.•...

82
NETWORK menu
ItemDescription
WIRED SETUP(continued)
TIME DIFFERENCE
Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the TIME DIFFERENCE to match your computer. If you are unsure what to enter, contact your IT manager. Use the ► button to return to the menu after setting TIME DIFFERENCE.
• When this item is set, TIME DIFFERENCE in the WIRED SETUP menu will be overwritten with the same setting (77). 
DATE AND TIME
Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hours and...

83
NETWORK menu
ItemDescription
PROJECTOR NAME
(1)  Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed.
(2)  
The current PROJECTOR NAME will be displayed on the first 3 lines. A projector name will be pre-assigned by default.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters.To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button simultaneously. Also...

84
NETWORK menu
ItemDescription
MY IMAGE
Select this to display the MY IMAGE menu. Use the application to transfer the image data. It can be downloaded from the InFocus website.(www.infocus.com/support).
Use the ▲/▼ buttons to select a still MY IMAGE image (4. My Image Function in the Network Guide) and the ► or ENTER button to display the image.
• If no images have been saved, you cannot select an image.• Only 16 characters of the image names can be displayed.
To switch the displayed image 
Use the ▲/▼...

85
NETWORK menu
ItemDescription
PRESENTATION
Select this to display the PRESENTATION menu.Use ▲/▼ buttons to select one of the following items, then press ► or the ENTER button to use the function.
• To use Network Presentation, an exclusive application, LiveViewer is required. It can be installed from the bundled application CD. You can also download the latest version and relevant information from the InFocus website (www.infocus.com/support). For more details about Network Presentation and...

86
SECURITY menu
ItemDescription
PRESENTATION(continued)
MULTI PC MODE(continued)
• To change from Single PC mode to Multi PC mode, press ► button to choose OK in the dialog and press the ENTER or INPUT button.The display mode will change.• For details on how to switch the display mode to Multi PC mode on your computer, refer to the LiveViewer manual.• The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode.  The Presenter mode setting  is...