InFocus Projector IN5132 User Manual

47
IMAGE menu
IMAGE menu
From the IMAGE menu, you can perform the items 
shown in the table below.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or the ENTER button 
to perform this item. Then follow the instructions 
below.  
ItemDescription
ASPECT
Using the ▲/▼ buttons switches the aspect ratio mode. 
For a computer signal
IN5132, IN5142:   NORMAL ó 4:3 ó 16:9 ó 16:10         
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:   NORMAL ó 4:3 ó 16:9 ó 16:10 ó NATIVE...

48
IMAGE menu
ItemDescription
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (magnifies picture) ó Large (reduces picture)
• This item can only be selected for a video, s-video and component video signal.• For an HDMITM signal, this item can also be selected if either (1) or (2) applies. (1)  HDMI FORMAT item in the INPUT menu for selected port is set to VIDEO.(2)  HDMI FORMAT item in the INPUT menu for selected port is set to AUTO, and the projector recognizes that it receives video...

49
IMAGE menu
ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can only be selected for a computer signal or a component video signal. This function is unavailable with LAN, USB TYPE A / B or HDMI 1 / 2 port signals.
H SIZE
Using the ◄/► buttons adjusts the horizontal size.
Small ó Large
• This item can only be selected for a computer signal. This function is unavailable with LAN, USB TYPE A / B or HDMI 1 / 2 port signals.• When...

50
INPUT menu
INPUT menu
From the INPUT menu, you can perform the items 
shown in the table below.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or the ENTER button to 
perform this item. Then follow the instructions below.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF  
• This function only works for composite, s-video, component and HDMITM signals (of 480i@60 or 576i@50 or 1080i@50/60).• When TV or FILM is selected, the...

51
INPUT menu
ItemDescription
VIDEO FORMAT
You can choose the video format for the S-VIDEO and VIDEO ports.
(1)  Use the ▲/▼ buttons to select the input port.
(2)  Using the ◄/► buttons switches the video format mode.
AUTO  ó  NTSC  ó  PAL  ó  SECAM
       N-PAL ó M-PAL ó NTSC4.43 
• This item only affects video signals from the VIDEO and S-VIDEO ports.• The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well with some signals. If the picture becomes unstable (e.g. an...

52
INPUT menu
ItemDescription
COMPUTER IN
The computer input signal type for COMPUTER IN1 and IN2 ports can be chosen.
(1)  Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select the computer input signal type.
AUTO ó SYNC ON G OFF
• Selecting the AUTO mode allows  you to input a sync on G signal or component video signal from the port.• In the AUTO mode, the picture may be distorted with certain input signals. In this case, remove the signal connector so that no...

53
INPUT menu
ItemDescription
RESOLUTION
The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be chosen on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be  displayed.
(2)  In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons.  Selecting AUTO will set a resolution appropriate to the input signal.
(3)  Pressing the ► or ENTER button when selecting a STANDARD resolution...

54
SETUP menu
ItemDescription
AUTO KEYSTONE 
Selecting this item performs the Automatic Keystone distortion correction. The projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle.When this function is selected, it will only be performed once. When the projector slant changes, perform this function again.
• The adjustable range of this function will vary among inputs. For some inputs, this function may not work well.• When the projector is in one of the...

55
SETUP menu
ItemDescription
 KEYSTONE
Using the ◄/► buttons corrects the horizontal keystone distortion.
Shrink the right of the image ó Shrink the left of the image
• The adjustable range of this function will vary among inputs. For some inputs, this function may not work well.• When the horizontal lens shift is not set to the center, this function may not work well.• This function is unavailable when the TRANSITION DETECTOR (90) is ON or the screen is adjusted by PERFECT FIT (33, 34).
PERFECT FIT...

56
SETUP menu
ItemDescription
STANDBY MODE
Using the▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. 
NORMAL ó SAVING
When SAVING is selected, the power consumption in standby mode is lowered with some functional restrictions as per below:
• When SAVING is selected and the projector is in standby mode, all RS-232 communication and network controls are disabled except the power on command. If COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all of the RS-232...