HP Photosmart C5383 User Manual

To set the paper type for copies
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the Menu bu tton to select Copy Settings .
3.Press the down arrow button to highlight  Paper Type, and then press  OK.
4. Press the down arrow button until the appropriate paper type appears, and then press
OK.
Refer to the following table to determine which paper type setting to choose based
on the paper loaded in the input tray.
Paper typeControl panel setting
Copier paper or letterheadPlain Paper
HP...

Change copy speed or quality
The HP All-in-One provides three options that affect copy speed and quality:
•Best  produces high quality for all paper and eliminates the banding (striping) effect
that sometimes occurs  in solid areas. Best copies slower than the  Normal or Fast
quality settings.
• Normal  delivers high quality and is the recommended setting for most of your
copying.  Normal copies faster than  Best and is the default setting.
• Fast  copies faster than the  Normal setting. The text is...

To set default copy settings from the control panel
1. Make any needed changes to the Copy settings.
2. Press  OK when  Copy is highlighted on the Home Screen.
3. Press the Menu bu tton to select Copy Settings .
4.Press the down arrow button to highlight  Set as New Defaults, and then press OK.
5. Press  OK to confirm.
NOTE: The settings you specify here are only saved on the product. They do not
adjust the settings in the software. You can save your most frequently used software
settings by using the...

Press the down arrow button or the up arrow button to highlight one of the following, and
then press OK.
• Actual Size : This feature enables you to print an exact copy of the original.
• Fit to Page :This feature enables you to copy an original to fit within the printable
margins of a page without the risk of cropping some part of your original.
NOTE: In order to resize your original without changing the proportions or
cropping the edges, the HP All-in-One might leave an uneven amount of white
space...

Shift the left margin
You can shift the left margin of the copies by using the Margin Shift option. This helps
in binding or 3-hole punching for the copies  produced. The HP All-in-One shifts the image
on the copies produced 0.95 cm (3/8 inch) to the right.
NOTE: When the  Margin Shift  feature is enabled, the right side of the copy images
may be cropped.
To shift the margin for your  copy from the control panel
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the Menu bu tton to...

Stop copying
To stop copying
▲Press Cancel on the control panel.
Stop copying 93
Copy
 

Chapter 10
94 Use the copy features
Copy
 

11 Use the reprint features
The HP All-in-One enables you to make reprints of photographic originals placed on the
glass.
This section contains the following topics:
•
Make reprints of your photos
•
Edit a photo before reprinting
Make reprints of your photos
You can scan a printed copy of a photo to make reprints in a variety of sizes, up to the
size of letter or A4 paper.
By default, the HP All-in-One is set to detect the type of paper you are using automatically.
For the best results when reprinting...

To fix a faded original photo when making a reprint
1.Press the Menu button on the reprint selection screen.
2.In the Edit Photo menu, press the up arrow or down arrow button to highlight  Fix
Faded Original , and then press  OK.
3. Press the up arrow or down arrow button to highlight  Yes, and then press  OK.
Related topics
“
Make reprints of your photos” on page 95
Rotate a photo
Depending on how you placed your original on the glass to copy it, the photo might appear
sideways or upside down on the...

To crop a photo
1.Press the Menu button on the reprint selection screen.
2.In the Edit Photo menu, press the up arrow or down arrow button to highlight  Crop,
and then press  OK.
3. Press the Zoom in button or the Zoom out button to zoom closer to or farther away
from the subject of the photo.
An outline appears on the photo to show you an approximate view of the area that
will print.
4. Press the arrows on the directional pad to pan around the photo and select a specific
area to print.
5. Press  OK to...