HP Photosmart C5383 User Manual

2.In the Edit Photos menu, press the up arrow or down arrow button until  Frame is
highlighted, and then press  OK.
3. Press the left arrow or right arrow  button to scroll through the frames.
4. When the frame you want is highlighted, press  OK.
The selected frame is applied to the photo and shown by itself on the display.
Related topics
“
Print photos” on page 72
Adjust the brightness of your photos
You can adjust the brightness of a photo so that it prints lighter or darker than the original
photo...

2.In the Edit Photos menu, press the up arrow or down arrow button to highlight  Color
Effect , and then press  OK.
3. Press the up arrow or down arrow button to select one of the following color effect
options, and then press  OK:
No EffectDoes not apply any special color effects to your photo.
Black & WhitePrints the photo in black and white.
SepiaApplies brown tones, similar to photos produced in the early 1900s, to
your photo.
AntiqueApplies brown tones along with some pale colors to your photo....

Chapter 8
80 Use the photo features
Photos
 

9 Use the scan features
Scanning is the process of converting text and pictures into an electronic format for your
computer. You can scan almost anything (photos, magazine articles and text documents)
on the HP All-in-One.
You can use the scanning features of the HP All-in-One to do the following:
• Scan text from an article into your word processor and quote it in a report.
• Print business cards and brochures by scanning a logo and using it in your publishing
software.
• Send photos to friends and...

NOTE:When scanning, the HP Photosmart Software enables you to save an image
in the following file form ats: BMP, DCX, FPX, GIF, JPG, PCD, PCX, and TIF.
To scan to a computer
1.Load your original print side down on the right front corner of the glass.
2.Press  Start Scan  on the control panel.
3. Press the down arrow button to highlight  Scan to Computer, and then press OK.
4. The  Scan To  menu appears on the display. Press the down arrow button to select
the job shortcut you want to use, and then press...

To save a scan to the memory card or storage device
1.Make sure your memory card is inserted into the appropriate slot on the product, or
a storage device is connected to the front USB port.
2. Load your original print side down on the right front corner of the glass.
3.Press  Start Scan .
4. Press the down arrow button to highlight  Scan to Memory Card or Scan to USB
Flash Drive , and then press  OK.
The product scans the image and saves the file to the memory card or storage device
in the JPEG...

Stop scanning
To stop scanning
▲Press Cancel on the control panel.
Chapter 9
84 Use the scan features
Scan
 

10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to  Letter  or A4, the paper type to  Plain Paper, and...

2.Load your original print side down on the right front corner of the glass.
3.Press  Start Copy Black  or Start Copy Color  to begin copying.
Preview your copy job
After changing settings on the HP All-in-One for making a copy, you can preview an image
of the expected output on the display before starting the copy.
NOTE:To ensure an accurate preview, change the paper size and type to reflect
the actual paper you have loaded in the input tray. If you use the Automatic settings,
the onscreen preview...

This section contains the following topics:
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type
•
Change copy speed or quality
•
Adjust the lightness and darkness of your copy
Set the number of copies
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
To set the number of copies from the control panel
1. Press  OK when  Copy is...