HP Photosmart C5383 User Manual

3.Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
4. Click the  Printing Shortcuts  tab.
5. In the  Printing Shortcuts  list, click the printing shortc ut that you want to delete.
6. Click  Delete .
The printing shortcut is removed from the list.
NOTE: Only the shortcuts that you have created can be deleted. The original HP
shortcuts cannot be deleted.
Perform...

3.Make sure the product is  the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Size list, click  More, and then select the size of photo paper loaded in the photo
tray.
If a borderless image can be printed on the specified size, the  Borderless printing
check box is enabled.
7. In the  Paper Type...

4.Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Basic Options  area, from the  Paper Type drop-down list, select  More. Then,
select the appropriate photo paper type.
7. In the  Resizing Options  area, from the Size drop-down list, select  More. Then, select
the appropriate paper size.
If the paper size and paper type are...

displays the optimized dots per inch (dpi) that the HP All-in-One printer will print. Printing
in maximum dpi is supported on the following paper-types only:
•HP Premium Plus Photo Paper
• HP Premium Photo Paper
• HP Advanced Photo Paper
• Photo Hagaki cards
Printing in maximum dpi takes longer than printing with other settings and requires a large
amount of disk space.
To print in Maximum dpi mode
1. Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application,...

To print directly onto a CD/DVD
1.Use the software that came with the product to create and print a CD/DVD label.
2. When prompted, load a CD/DVD into the CD/DVD holder on the product.
3. Push the CD/DVD holder into the product until the green lines on the CD/DVD holder
line up to the green lines on the CD/DVD tray.
NOTE: The product pulls the CD/DVD holder while printing on the media.
Related topics
“
Load a CD/DVD” on page 45
Print on both sides of the page
You can print two-sided pages with the HP...

7.For binding, do one of the following:
• For binding on the top like a notebook or calendar, select the  Flip Pages Up check
box.
This causes the odd and even pages of your document to print opposite of each
other top-to-bottom. This ensures that the top of the page is always at the top of
the sheet when you flip the pages up in your bound document.
• For binding on the side like a book or magazine, click to clear the  Flip Pages
Up  check box.
This causes the odd and even pages of your document to...

To print a multiple-page document as a booklet
1.Load paper into the input tray.
The paper should be thick enough so that the images do not show through to the
other side.
2. On the  File menu in your software application, click  Print.
3. Make sure the product is  the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features...

Figure 7-2 Right-edge binding for right-to-left languages
Print multiple pages on a single sheet
You can print up to 16 pages on a single sheet of paper.
To print multiple pages on a single sheet
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the product is  the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,...

Print a multiple-page document in reverse order
Because of the way the paper feeds through the HP All-in-One, the first page that prints
is print side up at the bottom of the stack. Usually this means you need to put the printed
pages in the correct order.
A better way is to print the document in reverse order so that the pages are stacked
correctly.
TIP:Set this option as a default setting so you do not have to remember to set it
every time you print a multiple-page document.
To print a multiple-page...

To reverse an image for iron-on transfers
1.On the  File menu in your software application, click  Print.
2. Make sure the product is  the selected printer.
3. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
4. Click the  Features  tab.
5. In the  Paper Type  drop-down list, click  More, and then select  HP Iron-on Transfer
from the list.
6. If the selected size...