HP OfficeJet J5520 User Manual

Related topics
•
Tips for selecting and using print media
•
Understand specifications for supported media
Print on special and custom-sized media
To print on special or custom-sized media
1.Load the appropriate media. For more information, see 
Load media.
2.With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
3.Click the Paper/Features tab.
4.Select the media size from the Size is drop-down list.
To set a custom media size:
a. Click the Custom button.
b....

7.Select the media source from the Source is drop-down list.
8.Select the media type from the Type is drop-down list.
9.If you are printing photos, select Best from the Print Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized dpi*
for optimum print quality.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10.Change any...

A group member must be a member of the speed-dial list before you can add the member
to a speed-dial group. You can add up to 20 fax numbers to each group (with up to 50
characters for each fax number).
•HP Photosmart Software: Open the HP Photosmart Software and follow the
instructions in the onscreen Help.
•Control panel: Press the Setup button, and then select the Speed Dial Setup option.
• To add a group: Select Group Speed Dial, select an unassigned speed-dial entry,
and then press OK. Use the arrow...

3Print
This section contains the following topics:
•
Change print settings
•
Print on both sides (duplexing)
•
Cancel a print job
Change print settings
You can change print settings (such as paper size or type) from an application or the
printer driver. Changes made from an application take precedence over changes made
from the printer driver. However, after the application is closed, the settings return to the
defaults configured in the driver.
NOTE:To set print settings for all print jobs, make the...

Guidelines for printing on both sides of a page
• Always use media that conforms to the device specifications. For more information,
see 
Understand specifications for supported media.
• Do not print on both sides of transparencies, envelopes, photo paper, glossy media,
or paper lighter than 16 lb bond (60 g/m
2) or heavier than 28 lb bond (105 g/m2). Jams
might occur with these media types.
• Several kinds of media require a specific orientation when you print on both sides of
a page, such as...

4 Copy
You can produce high-quality color and grayscale copies on a variety of paper types and
sizes.
This section contains the following topics:
•
Make copies from the control panel
•
Change the copy settings
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type from the control panel
•
Change copy speed or quality from the control panel
•
Resize an original to fit onto letter or A4 paper
•
Copy a legal-size document onto letter paper
•
Adjust the lightness and darkness of your...

When you change copy settings, the changes are for the current copy job only. You must
set the changes as defaults for the settings to apply to all future copy jobs.
To save the current settings as defaults for future jobs
1.Make any necessary changes to the settings in the Copy Menu.
2.Press Copy Menu, and then press the arrow keys until Set New Defaults appears.
3.Press the arrow keys to select Yes, and then press OK.
Set the number of copies
You can set the number of copies that you want to print by...

Refer to the following table to determine which paper type setting to choose based on the
paper loaded in the input tray.
Paper typeControl panel setting
Copier paper or letterheadPlain Paper
HP Bright White PaperPlain Paper
HP Premium Plus Photo Paper, GlossyPremium Photo
HP Premium Plus Photo Paper, MattePremium Photo
HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo PaperPremium Photo
HP Premium or Premium Plus Inkjet Transparency FilmTransparency
Other transparency filmTransparency
Change copy speed or...

Resize an original to fit onto letter or A4 paper
If the image or text on your original fills the entire sheet with no margins, use Fit to
Page or Full Page 91% to reduce your original and prevent unwanted cropping of the
text or images at the edges of the sheet.
TIP:You can also use Fit to Page to enlarge a small photo to fit within the printable
area of a full-size page. In order to do this without changing the proportions of the
original or cropping the edges, the device might leave an uneven amount...

To copy a legal-size document onto letter paper
1.Make sure you have paper loaded in the input tray.
2.Load your legal-size document print side up in the document feeder tray.
Place the page in the document feeder tray so that the top edge of the document goes
in first.
3.In the Copy area, press the Reduce / Enlarge button.
4.Press 
 until Legal > Ltr 72% appears.
5.Press START COPY Black or START COPY Color.
Adjust the lightness and darkness of your copy
You can use the Lighter / Darker option to adjust...