HP Officejet H470wbt User Manual

NOTE:To use the device with any wireless connection, you must run Setup at
least once from the Starter CD and create a wireless connection. After performing
one setup to create a wireless connection, you can connect the device to additional
networks by configuring new wireless profiles and changing the wireless profile
switch position.
NOTE: If you can see the ink levels in the Toolbox, the Toolbox is communicating
with the device.
1. Open the Toolbox. For more information, see Toolbox (Windows) .
2....

To print on a specific set profile
1.Change the number on the wireless profile switch to that specific profile.
2.Change the wireless network on your computer  to be in that specific profile.
3. Send a print job using the installed printer driver.
After you have configured more than one of  the wireless profiles, you can use the
wireless profile switch on the device to switch between the different profiles.
For example, if you configured profile 1 for printing in an infrastructure environment
(for...

Configure multiple printers for 802.11 (Windows)
You can use the Wireless Profile Configuration Utility to conveniently set up multiple
devices for wireless connection. This utility exports the device’s wireless profile
settings to a USB Flash drive. You can then configure other devices with these
settings by inserting the flash drive into another device’s USB host port.
NOTE:The Wireless Profile Configuration Utility is supported on the following
operating systems: Windows 2000 and Windows XP.
To use...

This section contains the following topics:
•
Set up a Bluetooth wireless connection
•
Configure Bluetooth wireless settings
•
Bluetooth wireless settings options
•
Bluetooth discovery
•
Bluetooth fonts
•
Wireless configuration page
•
Bonding
•
Bluetooth wireless profiles
Set up a Bluetooth wireless connection
This section describes how to set up a Bluetooth wireless connection.
To set up a Bluetooth wireless connection (Windows)
1. Save any open documents. Close any applications that are running on...

6.Open the Bluetooth Setup Assistant:
•Mac OSX (v. 10.3) : From the Finder, select  Utilities from the  Go menu, and
then double-click  Bluetooth Setup Assistant .
• Mac OSX (v. 10.4) : Click System Preferences in the Dock, and from the
Hardware  list, click Bluetooth . Click Devices , and then click  Set Up New
Device  to open the Bluetooth Setup Assistant.
NOTE: Make sure that Bluetooth is turned on, and that the computer is
Discoverable .
7.Follow the instructions on the screen. When prompted, select...

3.Open the HP Printer Utility. For more information, see HP Printer Utility (Mac OS) .
4. Select the device and click  Launch Utility.
5. Click the  Bluetooth Settings  panel.
6. Set the Bluetooth wireless options you want.
For descriptions of the Bluetooth wireless options, see 
Bluetooth wireless settings
options .
7. Click  Apply Now .
The printer ignores any other device that tries to establish a connection. The device
must wait until the original connection is closed before it can establish a new...

To change the device’s Bluetooth device name (Windows)
1.Connect the device to your computer with a USB cable.
2. Open the Toolbox. For more information, see 
Toolbox (Windows) .
3. Click the  Configure Bluetooth Settings  tab.
4. Enter a new device name of up to 60 characters in the  Device Name box.
5. Click  Apply.
The device’s Bluetooth device name is changed.
To change the device’s Bluetooth device name (Mac OS)
1. Connect the device to your computer with a USB cable.
2. Open the HP Printer Utility....

Reset device access
The following steps will clear all bonded devices from the device’s memory.
To reset device access (Windows)
1.Open the Toolbox. For more information, see 
Toolbox (Windows) .
2. Click the  Configure Bluetooth Settings  tab.
3. Click the  Reset Device Access  button.
A warning dialog box appears.
4. Click  OK to close the warning dialog box.
All bonded devices are removed from the device’s memory.
To reset device access (Mac OS)
1. Open the HP Printer Utility. For more information,...

Wireless configuration page
The wireless configuration page shows 802.11 and Bluetooth information you need
when using the device. For more information and instructions on printing this page,
see 
Understand the device information pages.
Bonding
When the printer and a sending device bond, they store each other’s Bluetooth device
address. This allows the device to discover the printer in Private mode.
The printer can bond to up to 31 devices. If you reach this limit and want to bond to an
additional...

Hardcopy cable replacement profile (HCRP)
• The Hardcopy Cable Replacement Profile lets you print with the same features,quality and speed as printing with a cable. The Hardcopy Cable Replacement
Profile provides the same basic functionality as the Serial Port Profile, with the
addition of bi-directional communication (e.g., messages such as “out of paper”,
“out of ink”, and job status). It also supports all of the functions offered with HP all-
in-one devices, such as printing, scanning, faxing, and...