HP Officejet H470wbt User Manual

ResourceDescriptionLocation
Self-test diagnostic page•Device information:
◦Product name
◦Model number
◦Serial number
◦Firmware version
number
•Accessories installed (for
example, the duplexer)
•Number of pages printed
from the trays and
accessories
•Printing supply status
For more information, seeUnderstand the deviceinformation pages.
HP Web sitesProvide the latest printer
software, and product and
support information.www.hp.com/support
www.hp.com
HP telephone supportLists information to contact
HP....

For users with mobility impairments, the device software functions can be executed
through keyboard commands. The software also supports Windows accessibility
options such as StickyKeys, ToggleKeys, FilterKeys, and MouseKeys. The device
doors, buttons, paper trays, and paper guides can be operated by users with limited
strength and reach.
Support
For more details about the accessibility of this product and HPs commitment to
product accessibility, visit HPs Web site at 
www.hp.com/accessibility.
For...

4Media width guide – Adjusts to accommodate different media sizes. Slide to the right to
accommodate narrow media. This automatically slides the narrow media guide to the left
to ensure that media is aligned for correct print margins.
5Narrow media guide –  When you move the media width guide to the right, this guide
automatically slides to the left to accommodate narrower media.
6Print cartridge latches –  Lift these latches for easy removal and insertion of print
cartridges.
7Print cartridge cradle...

8Security lock slot – Connect a security lock here.
9SD, MMC slots – Accepts a Secure Digital (SD) card or Multimedia Card (MMC) for
printing digital images.
10USB slot –  Accepts 802.11 or Bluetooth wireless USB accessory.
Control Panel
1 (Cancel button) –  Cancels the current print job. The time it takes to cancel
depends on the size of the print job. Press this button only once to cancel a queued
print job.
2 (Resume button) – Resumes a print job that is waiting or after temporary
interruption (for...

Bottom view
1Card holder – Holds a name card or business card.
2Cover of replaceable ink service module –  Provides access to the ink service module.
(See Replace the ink service module .)
Travel tips
The following tips will help you prepare for traveling with your device:
• If you are bringing an extra black  or photo print cartridge, follow these guidelines:
For a partially used black print cartridge or a partially used or full photo print
cartridge, store it in the travel  holder to prevent ink...

• Use only the power adapter that is supplied with the device. Do not use any othervoltage transformer or converter. The power adapter can be used with AC power
sources of 100 to 240 volts, 50 or 60 Hz.
• Remove the battery if you will not be using the device for more than a month.
• When traveling with photo paper, pack it flat  so it doesnt warp or curl. Photo paper
should be flat before printing. If the corners of the photo paper curl more than 10
mm (3/8 inch), flatten the paper by putting it in the...

2Install the accessories
This chapter provides information on optional accessories such as the battery and
wireless printer accessories that are included with certain device models. To order
accessories, see 
Order printing supplies online .
This section contains the following topics:
•
Install and use the battery
•
Install and use 802.11 and Bluetooth accessories
Install and use the battery
The lithium-ion rechargeable battery comes with HP Officejet H470b and HP Officejet
H470wbt printers. It is also...

Important notes
Take note of the following when charging or using the battery:
• Charge the battery for 4 hours before using the battery for the first time. Forsubsequent charges, it takes approximately 2 hours to fully charge the battery.
• The battery charge light is green when the battery is charging. If it is red, the battery might be faulty and need to be replaced.
• The Power light is green when the battery is 41-100% charged, amber when 10-40% charged, and red when less than 10% charged. Charge...

Charge and use the battery
WARNING!Charge the battery for 4 hours before using the battery for the first
time. Because the battery is normally warm while it is charging, do not charge it in
a briefcase or other confined space as this might cause the battery to overheat.
NOTE: The AC adapter is normally warm to the touch when plugged into an AC
outlet.
NOTE: Wireless printing uses more battery power than wired printing. For
information on checking the battery charge level, see 
Install and use the battery...

To remove the battery
1.Slide the battery release slider in the direction of the arrow.
2. Remove the battery.
Install and use 802.11 and Bluetooth accessories
Some models of the device include an 802.11 wireless or Bluetooth wireless USB
accessory.
See 
www.hp.com/support  to learn more about supported wireless accessories.
This section contains the following topics:
•
Install the 802.11 or Bluetooth wireless USB accessory
•
802.11 and Bluetooth wireless printing
Install the 802.11 or Bluetooth wireless...