HP Officejet 6000 Wireless User Manual

7.Clean the electrical contacts inside the product.
To clean the electrical contacts in the product
a. Lightly dampen a clean, lint-free cloth with bottled or distilled water.
b. Clean the electrical contacts in the product by wiping with the cloth from top to
bottom. Use as many fresh, clean cloths as necessary. Clean until no ink shows
on the cloth.
c. Wipe the area dry with a dry lint-free cloth before proceeding to the next step.
8.Make sure the latch handle is raised, and then reinsert the...

9.Carefully lower the latch handle.
NOTE:Make sure you lower the latch handle before reinserting the ink
cartridges. Leaving the latch handle raised can result in incorrectly seated ink
cartridges and problems printing. The latch must remain down in order to correctly
install the ink cartridges.
10.Using the colored shaped icons for help, slide the ink cartridge into the empty slot
until it clicks into place and is seated firmly in the slot.
11.Close the ink cartridge door.
Device Disconnected
Use the...

HP recommends you have a replacement available for when print quality becomes
no longer acceptable.
Use the following to correct the error:
•
Replace the ink cartridges
•
Supplies
NOTE:Ink level alerts and indicators provide estimates for planning purposes only.
When you receive a low-ink alerts, consider having a replacement cartridge available
to avoid possible printing delays. You do not need to replace the ink cartridges until
print quality becomes unacceptable.
For information on recycling used ink...

Cartridge Problem
Choose your error
•
The following cartridge appears to be missing or damaged
•
Cartridge(s) in Wrong Slot - The following cartridges are in the wrong slots
The following cartridge appears to be missing or damaged
Use the following to correct the error:
•
Replace the ink cartridges
•
Supplies
NOTE:Ink level alerts and indicators provide estimates for planning purposes only.
When you receive a low-ink alerts, consider having a replacement cartridge available
to avoid possible printing...

Paper Jam
There is a paper jam (or misfeed). Clear the jam and press the Resume button on
the printer
Use the following to correct the error:
Clear a jam in the device
The printer is out of paper.
Load more paper and press the Resume button on the front of the printer
Use the following to correct the error:
Load media
Incompatible Cartridge(s)
Choose your error
•
The following cartridge is not intended for use in this printer
•
The following cartridges are not intended for use in this printer as it is...

3.On the Printer menu, make sure there are no check marks next to Pause Printing
or Use Printer Offline.
4.If you made any changes, try to print again.
To check if the printer is paused or offline (Mac OS X)
1.Click System Preferences, click Print & Fax, and then click select the printer you
want to use.
2.Double-click the icon for your product to open the print queue.
3.If  Hold is selected, click Resume.
4.If you made any changes, try to print again.
Printer Paused
Your printer is currently paused
Use...

www.hp.com/support.
If prompted, choose your country/region, and then click Contact HP for information on
calling for technical support.
Errors (Windows) 123
 

6 Control-panel lights reference
The control-panel lights indicate status and are useful for diagnosing printing problems.
This section contains information about the lights, what they indicate, and what action to
take if necessary.
•
Interpreting control-panel lights
Interpreting control-panel lights
1Power button and light
2Resume button and light
3Cancel button
4Network button  (available with some models)
Wireless button 
 (available with some models)
5Ink cartridge lights
124 Control-panel lights...

For more information, visit the HP Web site (www.hp.com/support) for the latest
troubleshooting information, or product fixes and updates.
Light description/Light patternExplanation and
recommended action
All lights are off.The device is off.
•Connect the power cable.
•Press  (Power button).
The Power light is on.The device is ready.
No action is required.
The Power light blinks.The device is turning on or off,
or is processing a print job.
No action is required.
The device is pausing for the ink
to...

Light description/Light patternExplanation and
recommended action
loaded. For more information,
see Print on special and custom-sized media
The Power light and the Resume light are on.A cover is not closed
completely.
Make sure all covers are
completely closed.
The Power light is on and the ink cartridge lights blink one after
the the other, from left to right.The printhead is missing or
faulty
•Ensure the indicated
printhead is properly
installed.
•If the error persists, replace
the printhead.
Chapter...