HP LaserJet Enterprise M4555fskm User Manual

							Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1. From the Home screen, scroll to and touch the  Administration button.
2. To enable manual configuration, open each of the following menus:
a.Network Settings
b. Embedded Jetdirect Menu
c. TCP/IP
d. IPV6 Settings
e. Address
f. Manual Settings
g. Enable
Select the  On option, and then touch the  Save button.
3. To configure the address, open  each of the following menus:
● Network Settings
● Embedded Jetdirect Menu
● TCP/IP
● IPV6 Settings
● Address
Use the keypad to enter the address.
NOTE: If you are using the arrow buttons, you must press the  OK button after entering each
digit.
ENWW Connect to a network
81
 
						

							82 Chapter 5   Connect the productENWW
 
						

							6 Paper and print media
●Understand paper use
●
Change the printer driver to match the paper type and size in Windows
●
Supported paper sizes
●
Supported paper types
●
Load paper trays
●
Configure trays
●
Select an output bin (for models with a stapler/stacker)
ENWW 83
 
						

							Understand paper use
This product supports a variety of paper and other print media in accordance with the guidelines in this
user guide. Paper or print media that does not m eet these guidelines might cause poor print quality,
increased jams, and premature wear on the product.
For best results, use only HP-brand paper and print  media designed for laser printers or multiuse. Do
not use paper or print media made for inkjet pr inters. Hewlett-Packard Company cannot recommend
the use of other brands of media because HP cannot control their quality.
It is possible for paper to meet all of the guidelines in this user guide and still not produce satisfactory
results. This might be the result of improper hand ling, unacceptable temperature and/or humidity levels,
or other variables over which Hewlett-Packard has no control.
CAUTION: Using paper or print media that does not meet Hewlett-Packards specifications might
cause problems for the product, requiring repair. This repair is not covered by the Hewlett-Packard
warranty or service agreements.
Special paper guidelines
This product supports printing on special media.  Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be  sure to set the type and size in the printer driver
to obtain the best results.
CAUTION: HP LaserJet products use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this  extreme heat. Using inkjet paper could damage the
product.
Media type DoDo not
Envelopes ●Store envelopes flat.
● Use envelopes where the seam
extends all the way to the corner of
the envelope.
● Use peel-off adhesive strips that are
approved for use in laser printers. ●
Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
● Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
● Do not use self-stick adhesives or
other synthetic materials.
Labels ●Use only labels that have no
exposed backing between them.
● Use labels that lie flat.
● Use only full sheets of labels. ●
Do not use labels that have
wrinkles or bubbles, or are
damaged.
● Do not print partial sheets of labels.
Transparencies ●Use only transparencies that are
approved for use in color laser
printers.
● Place transparencies on a flat
surface after removing them from
the product. ●
Do not use transparent print media
not approved for laser printers.
84 Chapter 6   Paper and print media
ENWW
 
						

							Media typeDoDo not
Letterhead or preprinted forms ●Use only letterhead or forms
approved for use in laser printers. ●
Do not use raised or metallic
letterhead.
Heavy paper ●Use only heavy paper that is
approved for use in laser printers
and meets the weight specifications
for this product. ●
Do not use paper that is heavier
than the recommended media
specification for this product unless
it is HP paper that has been
approved for use in this product.
Change the printer driver to match the paper type
and size in Windows
1.
On the File  menu in the software program, click  Print.
2. Select the product, and then click the  Properties or Preferences  button.
3. Click the Paper/Quality  tab.
4. Select a size from the  Paper size drop-down list.
5. Select a paper type from the  Paper type drop-down list.
6. Click the OK  button.
ENWW Change the printer driver to match the paper type and size in Windows
85
 
						

							Supported paper sizes
NOTE:To obtain best results, select the correct paper size and type in the printer driver before
printing.
Table 6-1   Supported paper and print media sizes
Size and dimensions Tray 1Tray 2Optional Trays
3, 4, and 5 Automatic
duplex printing
Letter
216 x 279 mm (8.5 x 11 in)
Legal
216 x 356 mm (8.5 x 14 in)
Executive
184 x 267 mm (7.24 x 10.51 in)
Statement
140 x 216 mm (5.5 x 8.5 in)   
8.5 x 13
216 x 330 mm (8.5 x 13 in)
3 x 5
76 x 127 mm (3 x 5 in)   
4 x 6
101.6 x 152.4 mm (4 x 6 in)
   
10 x 15 cm
101.6 x 152.4 mm (4 x 6 in)
   
5 x 7
127 x 188 mm (5 x 7 in)
   
5 x 8
127 x 203 mm (5 x 8 in)
   
A4
210 x 297 mm (8.27 x 11.69 in)
A5
148 x 210 mm (5.83 x 8.27 in)
A6
105 x 148 mm (4.13 x 5.82 in)   
86 Chapter 6   Paper and print media ENWW
 
						

							Table 6-1  Supported paper and print media sizes (continued)
Size and dimensions Tray 1Tray 2Optional Trays
3, 4, and 5 Automatic
duplex printing
B5 (JIS)
182 x 257 mm (7.17 x 10.12 in)
B6 (JIS)
128 x 182 mm (5.03 x 7.16 in)   
16K
195 x 270 mm (7.67 x 10.62 in)
184 x 260 mm (7.24 x 10.23 in)
197 x 273 mm (7.75 x 10.74 in)
 
Postcard (JIS)
100 x 148 mm (3.93 x 5.82 in)
   
Double Postcard (JIS)
148 x 200 mm (5.82 x 7.87 in)
   
Custom
76 x 127 mm to 216 x 356 mm (3 x 5 in to
8.5 x 14 in)
1   
Custom
148 x 210 mm to 216 x 356 mm (5.83 x 8.27 in
to 8.5 x 14 in)  
 
Envelope #9
98 x 225 mm (3.85 x 8.85 in)
   
Envelope #10
105 x 241 mm (4.13 x 9.48 in)
   
Envelope Monarch
98 x 191 mm (3.9 x 7.5 in)
   
Envelope B5
176 x 250 mm (6.92 x 9.84 in)
   
Envelope C5
162 x 229 mm (6.37 x 9.01 in)
   
Envelope C6
162 x 114 mm (6.37 x 4.48 in)
   
ENWW Supported paper sizes
87
 
						

							Table 6-1  Supported paper and print media sizes (continued)
Size and dimensions Tray 1Tray 2Optional Trays
3, 4, and 5 Automatic
duplex printing
Envelope DL ISO
110 x 220 mm (4.33 x 8.66 in)
   
1The product can print on 76 x 127 mm (3 x 5 in) size paper from Tray 1 for Extra Heavy (131-175 g/m2) and Cardstock
(176-220 g/m2) paper types.
88 Chapter 6   Paper and print media ENWW
 
						

							Supported paper types
Paper typeTray 1Tray 2Optional Trays 3,
4, and 5Automatic duplex
printing
Plain Paper
Light (60–74 g/m2)
Cardstock (176–220 gm2)   
Transparency
 
Labels
 
Letterhead
Envelope1   
Preprinted
Prepunched
Colored
Bond
Recycled
Rough
1Also supported for the optional envelope feeder.
ENWW Supported paper types
89
 
						

							Load paper trays
Tray and bin capacity
Tray or bin Paper typeSpecificationsQuantity
Tray 1 Paper Range:
60 g/m
2 (16 lb) bond to 200 g/
m2 (53 lb) bond Maximum stack height: 10 mm
(0.39 in)
Equivalent to 100 sheets of 75 g/
m2 (20 lb) bond
Envelopes Less than 60 g/m
2 (16 lb) bond
to 90 g/m2 (24 lb) bond Up to 10 envelopes
Labels Maximum 0.23 mm (0.01 in)
thick Maximum stack height: 10 mm
(0.39 in)
Transparencies Minimum 0.13 mm (0.01 in) thick Maximum stack height: 10 mm
(0.39 in)
Up to 50 sheets
Tray 2 Paper Range:
60 g/m
2 (16 lb) bond to 120 g/
m2 (32 lb) bond Maximum stack height: 56 mm
(2.2 in)
Equivalent to 500 sheets of 75 g/
m2 (20 lb) bond
Maximum stack height for 10 x
15 cm (4 x 6 in) size paper:
15 mm (0.59 in)
Transparencies Minimum 0.13 mm (0.01 in) thick Maximum stack height: 56 mm (2.2 in)
Optional Trays 3,
4, and 5 Paper Range:
60 g/m
2 (16 lb) bond to 120 g/
m2 (32 lb) bond Equivalent to 500 sheets of 75 g/
m
2 (20 lb) bond
Maximum stack height: 56 mm
(2.2 in)
Transparencies Minimum 0.13 mm (0.01 in) thick Maximum stack height: 56 mm (2.2 in)
Output bin Paper Range:
60 g/m
2 (16 lb) bond to 200 g/
m2 (53 lb) bond Up to 500 sheets of 75 g/m
2
(20 lb) bond
Document feeder Paper Range:
60 g/m
2 (16 lb) bond to 220 g/
m2 (59 lb) bond Up to 50 sheets of 75 g/m
2
(20 lb) bond
90 Chapter 6   Paper and print media
ENWW