Honeywell 1300g2 Manual

							2 - 5
USB PC or Macintosh Keyboard
Scan one of the following codes to program the scanner for USB PC Keyboard 
or USB Macintosh Keyboard.  Scanning these codes also adds a CR and LF.
USB HID POS
Scan the following code to program the scanner for USB HID POS bar code 
scanners.
USB Serial Commands
USB Serial Emulation
Scan the following code to program the scanner to emulate a regular RS232-
based COM Port.  If you are using a Microsoft® Windows® PC, you will need to 
download a driver from the Honeywell website (www.honeywellaidc.com).  The 
driver will use the next available COM Port number.  Apple® Macintosh comput-
ers recognize the scanner as a USB CDC class device and automatically uses a 
class driver. 
Scanning this code also adds a CR and LF.
Note: No extra configuration (e.g., baud rate) is necessary.
U
SB
 
K
ey
b
o
a
rd
 
(
P
C)
USB Keyboard (Mac)
USB HID POS Bar Code 
Scanner
USB Serial Emulation 
						

							2 - 6
CTS/RTS Emulation
ACK/NAK Mode
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell 
bioptic scanner auxiliary port configuration.  This bar code sets the baud rate to 
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.  Character 
RTS/CTS with timeout and 232 ACK/NAK are also enabled.  
Note: If you are having unexpected results with this programming code, scan 
the Resetting the Custom Defaultsbar code on page 1-5 first, then scan 
the programming code above.
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode On
* ACK/NAK Mode Off
Honeywell Bioptic Settings 
						

							2 - 7
Datalogic™ Magellan®Bioptic 
Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic 
Magellan bioptic scanner auxiliary port configuration.  This bar code sets the 
baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.  
Note: If you are having unexpected results with this programming code, scan 
the Resetting the Custom Defaultsbar code on page 1-5 first, then scan 
the programming code above.
Wincor Mode A
Scan the following Plug and Play code to program the scanner for Wincor Mode 
A mode.  This bar code sets the baud rate to 9600 bps and the data format to 8 
data bits, odd parity, 1 stop bit. 
Note: If you are having unexpected results with this programming code, scan 
the Resetting the Custom Defaultsbar code on page 1-5 first, then scan 
the programming code above. 
Datalogic Magellan Bioptic Settings
Wincor Mode A 
						

							2 - 8
Keyboard Country Layout
Scan the appropriate country code below to program the keyboard layout for 
your country or language. As a general rule, the following characters are sup-
ported, but need special care for countries other than the United States:
@  |  $  #  {  }  [  ]  =  /  ‘    <  >  ~
* United States 
Albania
Arabic
Azeri (Cyrillic)
Azeri (Latin)
Belarus
Belgium
Bosnia 
						

							2 - 9
Brazil
Brazil (MS)
Bulgaria (Cyrillic)
Bulgaria (Latin)
Canada (French legacy)
Canada (French)
Canada (Multilingual)
China
Croatia 
						

							2 - 10
Czech
Czech (Programmers)
Czech (QWERTY)
Czech (QWERTZ)
Denmark
Dutch (Netherlands)
Estonia
Faroese
Finland 
						

							2 - 11
France
Gaelic
Germany
Greek
Greek (220 Latin)
Greek (220)
Greek (319 Latin)
Greek (319)
Greek (Latin) 
						

							2 - 12
Greek (MS)
Greek (Polytonic)
Hebrew
Hungarian (101 key)
Hungary
Iceland
Ireland
Italian (142)
Italy 
						

							2 - 13
Japan ASCII
Kazakh
Korea
Kyrgyz (Cyrillic)
Latin America
Latvia
Latvia (QWERTY)
Lithuania
Lithuania (IBM) 
						

							2 - 14
Macedonia
Malta
Mongolian (Cyrillic)
Norway
Poland
Polish (214)
Polish (Programmers)
Portugal
Romania