Honeywell 1300g2 Manual

							9 - 19
UPC E Default All UPC E
SettingsUPEDFT6-28
UPC E0 Off UPEEN006-28
*On UPEEN016-28
UPC E1 *Off UPEEN106-28
On UPEEN116-28
UPC E Expand *Off UPEEXP06-29
On UPEEXP16-29
UPC E Check Digit Off UPECKX06-30
*On UPECKX16-30
UPC E Number 
SystemOff UPENSX06-31
*On UPENSX16-31
UPC E 2 Digit 
Addenda*Off UPEAD206-31
On UPEAD216-31
UPC E 5 Digit 
Addenda*Off UPEAD506-31
On UPEAD516-31
UPC E Addenda 
Required*Not Required UPEARQ06-29
Required UPEARQ16-29
UPC E Addenda 
SeparatorOff UPEADS06-30
*On UPEADS16-30
EAN/JAN 13 Default All EAN/
JAN 13 SettingsE13DFT6-32
EAN/JAN 13 Off E13ENA06-32
*On E13ENA16-32
EAN/JAN 13 Check 
DigitOff E13CKX06-32
*On E13CKX16-32
EAN/JAN 13 2 Digit 
Addenda*Off E13AD206-33
On E13AD216-33
EAN/JAN 13 5 Digit 
Addenda*Off E13AD506-33
On E13AD516-33 SelectionSetting
* Indicates default
Serial 
Command
# Indicates a 
numeric entryPage 
						

							9 - 20
EAN/JAN 13 Addenda 
Required*Not Required E13ARQ06-33
Required E13ARQ16-33
EAN/JAN 13 Addenda 
SeparatorOff E13ADS06-34
*On E13ADS16-34
ISBN Translate *Off E13ISB06-34
On E13ISB16-34
EAN/JAN 8 Default All EAN/
JAN 8 SettingsEA8DFT6-35
EAN/JAN 8 Off EA8ENA06-35
*On EA8ENA16-35
EAN/JAN 8 Check 
DigitOff EA8CKX06-35
*On EA8CKX16-35
EAN/JAN 8 2 Digit 
Addenda*Off EA8AD206-36
On EA8AD216-36
EAN/JAN 8 5 Digit 
Addenda*Off EA8AD506-36
On EA8AD516-36
EAN/JAN 8 Addenda 
Required*Not Required EA8ARQ06-29
Required EA8ARQ16-29
EAN/JAN 8 Addenda 
SeparatorOff EA8ADS06-37
*On EA8ADS16-37
MSI Default All MSI 
SettingsMSIDFT6-37
MSI *Off MSIENA06-37
On MSIENA16-37
MSI Check Character *Validate Type 10, but 
Don’t TransmitMSICHK06-38
Validate Type 10 and 
Tr a n s m i tMSICHK16-38
MSI Message Length Minimum (4 - 48) *4 MSIMIN##6-38
Maximum (4 - 48) *48 MSIMAX##6-38
Plessey Code Default All Plessey 
SettingsPLSDFT6-39 SelectionSetting
* Indicates default
Serial 
Command
# Indicates a 
numeric entryPage 
						

							9 - 21
Plessey Code *Off PLSENA06-39
On PLSENA16-39
Plessey Message 
LengthMinimum (4 - 48) *4 PLSMIN##6-39
Maximum (4 - 48) *48 PLSMAX##6-39
GS1 DataBar 
OmnidirectionalDefault All 
GS1 DataBar 
Omnidirectional 
SettingsRSSDFT6-40
GS1 DataBar 
OmnidirectionalOff RSSENA06-40
*On RSSENA16-40
GS1 DataBar Limited Default All GS1 
DataBar
Limited SettingsRSLDFT6-40
GS1 DataBar Limited Off RSLENA06-40
*On RSLENA16-40
GS1 DataBar 
ExpandedDefault All GS1 
DataBar
Expanded SettingsRSEDFT6-41
GS1 DataBar 
ExpandedOff RSEENA06-41
*On RSEENA16-41
GS1 DataBar 
Expanded Msg. 
LengthMinimum (4 - 74) *4 RSEMIN##6-41
Maximum (4 - 74) *74 RSEMAX##6-41
China Post Code Default All China Post 
Code SettingsCPCDFT6-42
China Post Code *Off CPCENA06-42
On CPCENA16-42
China Post Code Msg. 
LengthMinimum (2 - 80) *4 CPCMIN##6-42
Maximum (2 - 80) *80 CPCMAX##6-42
Korea Post Code Default All Korea Post 
Code SettingsCPCDFT6-43
Korea Post Code *Off CPCENA06-43
On CPCENA16-43 SelectionSetting
* Indicates default
Serial 
Command
# Indicates a 
numeric entryPage 
						

							9 - 22
Korea Post Code Msg. 
LengthMinimum (2 - 80) *4 CPCMIN##6-43
Maximum (2 - 80) *80 CPCMAX##6-43
Codablock F Default All Codablock 
F SettingsCBFDFT6-44
Codablock F *Off CBFENA06-44
On CBFENA16-44
Codablock F Msg. 
LengthMinimum (1 - 2048) *1 CBFMIN####6-44
Maximum (1 - 2048) 
*2048CBFMAX####6-44
Code 49 Default All Code 49 
SettingsC49DFT6-45
Code 49 * Off C49ENA06-45
On C49ENA16-45
Code 49 Minimum (1 - 81) *1 C49MIN##6-45
Maximum (1 - 81) *81 C49MAX##6-45
GS1 EmulationGS1 Emulation EANEMU26-46
GS1-128 Emulation EANEMU16-46
*GS1 Emulation Off EANEMU06-46
Label Code *Off LBLENA06-47
On LBLENA16-47 SelectionSetting
* Indicates default
Serial 
Command
# Indicates a 
numeric entryPage 
						

							10 - 1
10
Product Specifications
Hyperion 1300g Product Specifications
Parameter Specification
Mechanical
Height
5.9 inches (15 cm)
Length
4.4 inches (11.2 cm)
Width
3.1 inches (7.9 cm)
Weight
5.6 ounces (160 g)
Electrical
LED source
630 nm visible red LED
Input Voltage
4.5-5.5VDC at imager
Operating Power
200mA @ 5V
Standby Power
125mA @5V
Environmental
Operating Temperature
32 F to +122 F (0 C to +50 C)
Storage Temperature
-40 F to +140 F (-40 C to +60 C)
Humidity
0 to 95% non-condensing
DropOperational after 50 drops from 5 feet 
(1.5 m) to concrete
Environmental Sealing
IP41
Light Levels
70,000 lux
ESD
15 kV to any external surface
Sealant Rating
IP41
Scan Performance
Scan Pattern
Single Line
Motion Tolerance
20 inches (51 cm) per second
Scan Rate
Up to 270 scans per second
Print Contrast
20%
Pitch, Skew
 65
Decode CapabilitiesReads standard 1D and GS1 DataBar 
symbologies
Optional External Power Supply 
RequirementsUse only a Listed Limited Power Source (LPS) or 
Class 2 type power supply with output rated 5 to 
5.2Vdc, 1A 
						

							10 - 2
Standard Connector Pinouts
Keyboard Wedge
10 Pin RJ41 Modular Plug - connects to the scanner handle
Serial Output
10 Pin RJ41 Modular Plug - connects to the scanner handle 
USB
10 Pin Modular Plug - connects to the scanner handle
1 Cable shield
2 Cable select
3 Supply ground
4 Terminal data
5 Terminal clock
6 Keyboard clock
7+5V power
8 Keyboard data
9
10
1 Cable shield
2 Cable select
3 Supply ground
4 Transmit data
5 Receive data - serial data to scanner
6CTS
7 +5V power
8RTS
9
10
1 Cable shield
2 Cable select
3 Supply ground
4
5
6
7+5V power
8
9 Data +
10 Data - 
						

							10 - 3
Required Safety Label Locations
 
Light Source
Item 
Number, 
Serial 
Number 
and 
Revision Compliance 
Label location 
						

							10 - 4 
						

							11 - 1
11
Maintenance
Repairs
Repairs and/or upgrades are not to be performed on this product.  These ser-
vices are to be performed only by an authorized service center.  See Customer 
Supporton page 12-1 for further information.
Maintenance
Your device provides reliable and efficient operation with a minimum of care.  
Although specific maintenance is not required, the following periodic checks 
ensure dependable scanner operation:
Cleaning the Device
Reading performance may degrade if the scanner’s window is not clean.  If the 
window is visibly dirty, or if the scanner isn’t operating well, clean the window 
with a soft cloth or lens tissue dampened with water (or a mild soapy water solu-
tion).  If a soapy water solution is used, rinse with a clean lens tissue dampened 
with water only.
The scanner’s housing may also be cleaned the same way.
Inspecting Cords and Connectors
Inspect the scanner’s interface cable and connector for wear or other signs of 
damage.  A badly worn cable or damaged connector may interfere with scanner 
operation.  Contact your Honeywell distributor for information about cable 
replacement.  Cable replacement instructions are on page 11-2.
!Caution:
Do not submerge the scanner in water. Do not use 
abrasive wipes or tissues on the scanner’s window – 
abrasive wipes may scratch the window.
Never use solvents (e.g., acetone, benzene, ether, or 
phenol-based agents) on the housing or window – 
solvents may damage the finish or the window. 
						

							11 - 2
Replacing the Interface Cable
The standard interface cable is attached to the scanner with an 10-pin modular 
connector.  When properly seated, the connector is held in the scanner’s handle 
by a flexible retention tab.  The interface cable is designed to be field replace-
able.
 Order replacement cables from Honeywell or from an authorized distributor.
 When ordering a replacement cable, specify the cable part number of the 
original interface cable.
Replacing the Interface Cable:
1. Turn the power to the host system 
OFF.
2. Disconnect the scanner’s cable from 
the terminal or computer.
3. Locate the small hole on the side of 
the scanner’s handle.  This is the 
cable release.
4. Straighten one end of a paper clip.
5. Insert the end of the paper clip into the 
small hole and press in.  This 
depresses the retention tab, releasing 
the connector.  Pull the connector out 
while maintaining pressure on the 
paper clip, then remove the paper clip.
6. Replace with the new cable.  
Insert the connector into the opening 
and press firmly.  The connector is 
keyed to go in only one way, and will click into place.
Troubleshooting
The scanner automatically performs self-tests whenever you turn it on.  If your 
scanner is not functioning properly, review the following Troubleshooting Guide 
to try to isolate the problem.
Is the power on?  Is the aiming beam line on? 
If the aiming beam line isn’t illuminated, check that:
 The cable is connected properly.
 The host system power is on (if external power isn’t used).
 The trigger works.
Cable
Release