GE Nx 8 Manual

         
 
GE Security g 
LOCATION 208 – BAUD RATE TABLE (1 segment, feature selection data) 
The serial port can operate on a number of different baud rates. Consult the home 
automation information to determine the best baud rate for your application and program 
it in location 208. The default is “2” – 9600 baud or the serial printer baud rate. 
Segment 1 0 = 2400 Baud (2.4K) 
 1 = 4800 Baud (4.8K) 
 2 = 9600 Baud (9.6K) 
 3 = 19200 Baud (19.2K) 
 4 = 38400 Baud (38.4K) 
 5-7 Reserved 
 
LOCATION...

         
 
GE Security g 
LOCATION 211 – PROGRAMMING THE COMMAND / REQUEST ENABLES (4 segments, feature 
selection data) 
The NX-8E has the ability to perform a variety of commands asked of it by the home 
automation system. For example, it is possible to allow arming and disarming of the 
security system, programming of the security system, or bypassing of zones by the home 
automation system. Location 211 is used to select which commands, if any, you wish the 
home automation system to have access....

         
 
GE Security g 
LOCATION 212 – PROGRAMMING THE LCD KEYPAD ADDRESS (1 segment, numerical data) 
Certain commands in the NX-8E require it to know the location of at least 1 LCD keypad 
(if one exist in the system). If your system has a LCD keypad it is recommended that it 
will be placed in location 1 keypad 1. This will allow location 212 to be left at the factory 
default. If the LCD keypad is selected as something other than partition 1 / keypad1, 
program the appropriate address in location...

         
 
GE Security g 
 
NX-8E PROGRAMMING WORKSHEETS 
 (Factory defaults for segments are in bold italic text) 
 
LOC PG DESCRIPTION  DEFAULT  PROGRAMMING DATA 
 
0 32 PHONE 1 14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14  
1 32 PHONE 1, ACCOUNT CODE 10 – 10 – 10 – 10 – 10 – 10  
2 32 PHONE 1, REPORTING FORMAT 0  
3 32 PHONE 1, DIAL ATTEMPTS 
BACKUP CONTROL 
8 
0 
 
PHONE 1, SELECTING EVENTS TO REPORT TO PHONE 1 
Segment 1   (Circle Numbers To Program) Segment 2   (Circle Numbers To...

         
 
GE Security g 
 
PHONE 2, SELECTING WHICH PARTITIONS REPORT TO PHONE 2 
Segment 1   (Circle Numbers To Program) 
1 Partition 1 
2 Partition 2 
3 Partition 3 
4 Partition 4 
5 Partition 5 
6 Partition 6 
7 Partition 7 
11 37 
8 Partition 8 
 
 
12 37 PHONE 3 14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14  
13 37 PHONE 3, ACCOUNT CODE 10 – 10 – 10 – 10 – 10 – 10  
14 38 PHONE 3, REPORTING FORMAT 0  
15 38 PHONE 3, DIAL ATTEMPTS 
BACKUP CONTROL 
8 
0 
 
PHONE 3, SELECTING EVENTS TO...

         
 
GE Security g 
 
DOWNLOAD CONTROL 
Segment 1   (Circle Numbers To Program) 
1 Enables two-call answering machine defeat 
2 Reserved 
3 Requires callback before downloading 
4 Shutdown control panel 
5 Lock out local programming 
6 Lock out communicator programming 
7 Lock out download section 
21 41 
8 Enables callback at autotest interval 
 
 
22 41 CALLBACK PHONE NUMBER 14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14-14  
 
 
PARTITION 1, FEATURE SELECTION 
Segment 1    Segment 2...

         
 
GE Security g 
 
27 47 ZONES 9-16, CONFIGURATION GROUPS  6-6-6-6-6-6-6-6  
ZONES 9-16,  PARTITION SELECTION (Segment 1=Zone 9 thru Segment 8=Zone 16) 
Segments 1 2 3 4 5 6 7 8 
Partition 1 1 1 1 1 1 1 1 1 
Partition 2 2 2 2 2 2 2 2 2 
Partition 3 3 3 3 3 3 3 3 3 
Partition 4 4 4 4 4 4 4 4 4 
Partition 5 5 5 5 5 5 5 5 5 
Partition 6 6 6 6 6 6 6 6 6 
Partition 7 7 7 7 7 7 7 7 7 
28 47 
Partition 8 8 8 8 8 8 8 8 8 
29 48 ZONES 17-24, CONFIGURATION GROUPS  6-6-6-6-6-6-6-6  
ZONES 17-24,...

         
 
GE Security g 
 
SIREN AND SYSTEM SUPERVISION 
Segment 1   (Circle Numbers To Program) 
1 Siren sounds for telephone line cut while armed 
2 Siren sounds for telephone line cut while disarmed 
3 Siren blast at arming (pulse) 
4 Siren blast at exit delay expiration (pulse) 
5 Siren blast at closing kissoff (pulse) 
6 Siren sounds during a cross zone verification time 
7 Siren sounds for a tamper 
8 Siren blast once for keyswitch arming, twice for disarming 
Segment 2   (Circle Numbers To...

         
 
GE Security g 
38  51 SWINGER COUNTDOWN COUNT 0 
KEYPAD SOUNDER CONTROL 
Segment 1   (Circle Numbers To Program) 
1 Keypad sounds for Telephone Line Cut when in the Armed state 
2 Keypad sounds for Telephone Line Cut when in the Disarmed state 
3 Keypad sounds upon AC Power Failure 
4 Keypad sounds upon Low Battery Detection 
5 Keypad sounds during Cross Zone Trip Time 
6 Keypad sounds for Tamper Alarm 
7 Reserved 
39 
 
 
51 
8 Keypad sounds for Expander Trouble 
 
SYSTEM TIMERS 
Segment 1...

         
 
GE Security g 
 
42 52 GO TO PROGRAM CODE 9-7-1-3-0-0  
GO TO PROGRAM CODE PARTITION AND AUTHORIZATION 
Segment 1   (Circle Numbers To Program) 
1 Reserved 
2 Enables “Go To Program Code” as an arm only code 
3 Enables “Go To Program Code” as an arm only code after closing 
4 Enables “Go To Program Code” as a master arm/disarm code (can change user codes) 
5 Enables “Go To Program Code” as an arm/disarm code 
6 Enables “Go To Program Code” to bypass zones 
7 Enables “Go To Program Code”...