GE Nx 8 Manual

         
 
GE Security g 
THE NUMBER IN PARENTHESES FOLLOWING THE EVENT IS THE NUMBER THAT WILL BE 
REPORTED AS THE ZONE NUMBER. IF THERE ARE NO PARENTHESES, THE ZONE WILL BE “0”. SEE 
APPENDIX 3 FOR THE DEVICE NUMBERS. 
* The character transmitted in this slot will be the first character from the event code of the zone that is 
bypassed or in trouble (see locations 110 - 169). 
NX-8E Installation manual Page 121 Date 08/09/04  

         
 
GE Security g 
 
APPENDIX 2: REPORTING ZONE CODES IN SIA OR 
CONTACT ID   
 
The NX-8E has the ability to report SIA level 1 transmissions to either or both phone numbers. Each report in 
SIA consists of an Event Code and a Zone or User ID. The Zone ID will be the zone number that is in alarm. 
The event code will come from the chart below, and it will be programmed in the configuration group event 
code. 
Programmed Event Code SIA Code Description 
0 HA Holdup Alarm 
1 FA Fire Alarm 
2 PA...

         
 
GE Security g 
 
 
The NX-8E can report Ademco Contact ID transmissions. Each report in Contact ID consists of an Event 
Code and a Zone ID. The zone ID is the zone that generated the alarm. The event code will come from the 
chart below, and it will be programmed in the configuration group event code. 
Programmed Event Code CONTACT-ID Description 
0 122 Silent Panic 
1 110 Fire Alarm 
2 120 Panic alarm 
3 130 Burglary Alarm 
4 131 Perimeter Alarm 
5 132 Interior Alarm 
6 133 24 Hour...

         
 
GE Security g 
 
APPENDIX 3: EXPANDER NUMBERS FOR REPORTING 
EXPANDER TROUBLE 
The tables below list the device numbers that will be reported for each expander/keypad where a trouble 
condition is present. For trouble conditions relating to the control panel, the device number is “0”. 
 
Keypads 
KEYPAD PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8 
1 192 193 194 195 196 197 198 199 
2 200 201 202 203 204 205 206 207 
3 208 209 210 211 212 213 214 215 
4 216 217 218 219 220 221 222...

         
 
GE Security g 
Output module NX-507E or NX-508E 
Output module DIP 1 DIP 2 DIP 3 Expander number 
reported 
1 ON ON OFF 24 
2 OFF OFF ON 25 
3 ON OFF ON 26 
4 OFF ON ON 27 
5 ON ON ON 28 
6 OFF OFF OFF 29 
7 ON OFF OFF 30 
8 OFF ON OFF 31 
 
 
Hardwired expander NX-216E 
Starting zone 
number 
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 Expander number 
reported 
Zone 9 ON OFF OFF OFF OFF N/A 23 
Zone 17 OFF ON OFF OFF OFF N/A 16 
Zone 25 ON ON OFF OFF OFF N/A 17 
Zone 33 OFF OFF ON OFF OFF N/A 18...

         
 
GE Security g 
  
Security g 
CE DECLARATION 
NX-8E Installation manual Page 126 Date 08/09/04  

         
 
GE Security g 
 
 
NX-8E Installation manual Page 127 Date 08/09/04  

         
 
GE Security g 
 
 
 
NX-8E Installation manual Page 128 Date 08/09/04  

         
NX-8E Installation manual Page 129 Date 08/09/04 
 
GE Security g  

 
 
 
 
 
 
www.gesecurity.com
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
EMEA Distribution is a division of GE Security EMEA bvba 
 
COPYRIGHT ©2004 
 
© GE Security EMEA bvba.  All rights reserved. GE Security EMEA bvba grants the right to reprint this 
manual for internal use only. GE Security EMEA bvba reserves the right to change information without 
notice.