GE Nx 8 Manual
Have a look at the manual GE Nx 8 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GE Security g
THE NUMBER IN PARENTHESES FOLLOWING THE EVENT IS THE NUMBER THAT WILL BE
REPORTED AS THE ZONE NUMBER. IF THERE ARE NO PARENTHESES, THE ZONE WILL BE “0”. SEE
APPENDIX 3 FOR THE DEVICE NUMBERS.
* The character transmitted in this slot will be the first character from the event code of the zone that is
bypassed or in trouble (see locations 110 - 169).
NX-8E Installation manual Page 121 Date 08/09/04
GE Security g
APPENDIX 2: REPORTING ZONE CODES IN SIA OR
CONTACT ID
The NX-8E has the ability to report SIA level 1 transmissions to either or both phone numbers. Each report in
SIA consists of an Event Code and a Zone or User ID. The Zone ID will be the zone number that is in alarm.
The event code will come from the chart below, and it will be programmed in the configuration group event
code.
Programmed Event Code SIA Code Description
0 HA Holdup Alarm
1 FA Fire Alarm
2 PA Panic alarm
3 BA Burglary Alarm
4 BA Burglary Alarm
5 BA Burglary Alarm
6 UA Untyped Alarm
7 BA Burglary Alarm
8 BA Burglary Alarm
9 UA Untyped Alarm
10 HA Holdup Alarm
11 MA Medical Alarm
12 PA Panic alarm
13 TA Tamper Alarm
14 RP Periodic Test
15 GA Gas Alarm
16 KA Heat Alarm
17 WA Water Alarm
18 QA Emergency Alarm
19 SA Sprinkler Alarm
20 ZA Freeze Alarm
NX-8E Installation manual Page 122 Date 08/09/04
GE Security g
The NX-8E can report Ademco Contact ID transmissions. Each report in Contact ID consists of an Event
Code and a Zone ID. The zone ID is the zone that generated the alarm. The event code will come from the
chart below, and it will be programmed in the configuration group event code.
Programmed Event Code CONTACT-ID Description
0 122 Silent Panic
1 110 Fire Alarm
2 120 Panic alarm
3 130 Burglary Alarm
4 131 Perimeter Alarm
5 132 Interior Alarm
6 133 24 Hour Burglary
7 134 Entry Alarm
8 135 Day/Night Alarm
9 150 Non Burglary 24 Hour
10 121 Duress Alarm
11 100 Medical Alarm
12 123 Audible Panic Alarm
13 137 Tamper Alarm
14 602 Periodic Test
15 151 Gas Detected
16 158 High Temp
17 154 Water Leakage
18 140 General Alarm
19 140 General Alarm
20 159 Low Temp
21 158 High Temp Alarm
22 115 Manual Fire Alarm
NX-8E Installation manual Page 123 Date 08/09/04
GE Security g
APPENDIX 3: EXPANDER NUMBERS FOR REPORTING
EXPANDER TROUBLE
The tables below list the device numbers that will be reported for each expander/keypad where a trouble
condition is present. For trouble conditions relating to the control panel, the device number is “0”.
Keypads
KEYPAD PART 1 PART 2 PART 3 PART 4 PART 5 PART 6 PART 7 PART 8
1 192 193 194 195 196 197 198 199
2 200 201 202 203 204 205 206 207
3 208 209 210 211 212 213 214 215
4 216 217 218 219 220 221 222 223
5 224 225 226 227 228 229 230 231
6 232 233 234 235 236 237 238 239
7 240 241 242 243 244 245 246 247
8 248 249 250 251 252 253 254 255
Remote power supply NX-320E
Power supply DIP 1 DIP 2 DIP 3 Expander number
reported
1 OFF OFF OFF 84
2 ON 85 OFF OFF
3 OFF ON OFF 86
4 ON ON OFF 87
5 OFF OFF ON 88
6 ON OFF ON 89
7 OFF ON ON 90
8 ON ON ON 91
Wireless receiver NX-448E
Wireless receiver DIP 1 DIP 2 DIP 3 Expander number
reported
1 OFF 35 OFF OFF
2 ON OFF OFF 36
3 OFF ON OFF 37
4 ON ON OFF 38
5 OFF OFF ON 39
6 ON OFF ON 32
7 OFF ON ON 33
8 ON ON ON 34
NX-8E Installation manual Page 124 Date 08/09/04
GE Security g
Output module NX-507E or NX-508E
Output module DIP 1 DIP 2 DIP 3 Expander number
reported
1 ON ON OFF 24
2 OFF OFF ON 25
3 ON OFF ON 26
4 OFF ON ON 27
5 ON ON ON 28
6 OFF OFF OFF 29
7 ON OFF OFF 30
8 OFF ON OFF 31
Hardwired expander NX-216E
Starting zone
number
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 Expander number
reported
Zone 9 ON OFF OFF OFF OFF N/A 23
Zone 17 OFF ON OFF OFF OFF N/A 16
Zone 25 ON ON OFF OFF OFF N/A 17
Zone 33 OFF OFF ON OFF OFF N/A 18
Zone 41 ON OFF ON OFF OFF N/A 19
Zone 49 ON 20 OFF ON OFF OFF N/A
Zone 57 ON ON ON OFF OFF N/A 21
Zone 65 OFF OFF OFF ON OFF N/A 96
Zone 73 ON OFF OFF 97 ON OFF N/A
Zone 81 OFF ON OFF OFF ON N/A 98
Zone 89 ON ON OFF ON OFF N/A 99
Zone 97 OFF OFF ON ON OFF N/A 100
Zone 105 ON OFF N/A ON ON OFF 101
Zone 113 ON OFF ON ON OFF N/A 102
Zone 121 ON ON ON ON OFF N/A 103
Zone 129 OFF OFF OFF OFF ON N/A 104
Zone 137 ON ON OFF OFF OFF N/A 105
Zone 145 OFF ON OFF OFF ON N/A 106
Zone 153 ON ON OFF OFF ON N/A 107
Zone 161 OFF ON OFF ON OFF N/A 108
Zone 169 ON OFF ON OFF ON N/A 109
Zone 177 OFF ON ON OFF ON N/A 110
Zone 185 ON ON N/A ON OFF ON 111
NX-8E Installation manual Page 125 Date 08/09/04
GE Security g
Security g
CE DECLARATION
NX-8E Installation manual Page 126 Date 08/09/04
GE Security g
NX-8E Installation manual Page 127 Date 08/09/04
GE Security g
NX-8E Installation manual Page 128 Date 08/09/04
NX-8E Installation manual Page 129 Date 08/09/04
GE Security g
www.gesecurity.com EMEA Distribution is a division of GE Security EMEA bvba COPYRIGHT ©2004 © GE Security EMEA bvba. All rights reserved. GE Security EMEA bvba grants the right to reprint this manual for internal use only. GE Security EMEA bvba reserves the right to change information without notice.