GE Logiq P5 User Manual

Measurement and Calculation Setup
LOGIQ 5 Basic User Manual 7-21
Direction 2300002-100 Rev. 2
Selecting a study or measurement (continued)
To select a folder or measurement: 
1. Move the Trackball to the Selection menu and highlight the 
folder or measurement. 
2. Press Set.
•  If you selected a folder, the system displays the folder in 
the Folder section of the Measurement & Analysis 
screen.
•  If you selected a measurement, the system displays the 
measurement in the Measurement section of the...

General Measurements and Calculations
7-22 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Using folders
When you select a folder in the Selection menu, the system 
displays all folders and measurements that are in the folder. A 
folder can indicate a study, or can indicate a measurement 
group that contains related measurements. For example, a 
calculation such as OB Amniotic Fluid Index (AFI) requires four 
measurements, one of each quadrant. The AFI folder contains 
four measurements. 
 Figure...

Measurement and Calculation Setup
LOGIQ 5 Basic User Manual 7-23
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder
The Folder section of the Measurement & Analysis screen has 
two lists of folders and measurements. This is where you specify 
which items go in a study or folder.
• Available folders and measurements. The left list 
contains all possible folders and measurements for the 
selected study or folder. 
• Measure & Study. The right list has all folders and...

General Measurements and Calculations
7-24 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder (continued)
To add an item to the Measure & Study list:
1.  In the Measure & Study list, move the Trackball to highlight 
where you want to put the item, and press Set. 
 Figure 7-12. Measure & Study list: Select position 

Measurement and Calculation Setup
LOGIQ 5 Basic User Manual 7-25
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder (continued)
2. Move the Trackball to highlight an item in the Available 
folders and measurements list, and press Set.
 Figure 7-13. Available folders and measurements list: Select item 

General Measurements and Calculations
7-26 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder (continued)
3.  Select the arrow between the lists.The item is copied to the 
Measure & Study list. 
The selected item is now displayed in the Touch Panel and 
the Summary Window. See the Touch Panel in Figure 7-15.
 Figure 7-14. Measure & Study list: New item added 

Measurement and Calculation Setup
LOGIQ 5 Basic User Manual 7-27
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder (continued)
 Figure 7-15. Touch Panel for RV/LV Cardiac folder: IVSd 
measurement added
NOTE:  If an item is already in the Measure & Study list, the system does 
not allow you to add it again. To move an item within the 
Measure & Study list, See ‘Moving items in the Touch Panel’ for 
more information..  

General Measurements and Calculations
7-28 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Specifying Which Measurements Go in a Study or Folder (continued)
Touch Panel positions
Each Touch Panel has 16 positions, four across and four down. 
The items in the first row across are numbered 1–4, in the 
second row 5–8, and so on. See Figure 7-16 and Figure 7-17. 
These figures show the OB/GYN Vessel Touch Panel and the 
Measurement & Analysis screen for the OB/GYN Vessel. The 
numbers are shown in...

Measurement and Calculation Setup
LOGIQ 5 Basic User Manual 7-29
Direction 2300002-100 Rev. 2
Touch Panel positions (continued)
 Figure 7-17. Measurement & Analysis: OB/GYN Vessel  

General Measurements and Calculations
7-30 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Moving items in the Touch Panel
To move items that are in the Touch Panel, you move them in 
the Measure & Study list.
1. Move the Trackball to highlight an item in the Measure & 
Study list.
2.  Select the up or down arrow.
The item is displayed at the selected position in the Touch 
Panel.
NOTE:  Some items cannot be moved. For example, Worksheet Display 
and Page Change are in the same place on each Touch...