GE Logiq P5 User Manual

Annotating an Image
LOGIQ 5 Basic User Manual 6-11
Direction 2300002-100 Rev. 2
Adding Comments to an Image
Annotation Retention
Annotations from the B-Mode images are retained and carried 
over when switching to multi-image format or duplex mode.
The position of the comments is adjusted so that it is at the 
same relative position with respect to the display window in the 
new format as it was in the single image format.
NOTE:  Annotations may not be retained when the image is switched to 
M-Mode image...

Scanning/Display Functions
6-12 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Text Overlays
There are 2 layers of the text in annotations, which can be 
selected by toggling the F8 (Text1/Text2) key on the keyboard. 
Text1 is the default choice.
By using this function, users can perform a HIDE TEXT/SHOW 
TEXT, allowing the users to save or printing an image without 
clearing the typed text.
Annotating an image using the library
Press Comment and move the annotation cursor location using 
the...

Annotating an Image
LOGIQ 5 Basic User Manual 6-13
Direction 2300002-100 Rev. 2
Annotating an image with typed words
• Press Comment and type the comments where the cursor 
is currently located (the displays home position) or use the 
Trackball/Arrow keys to place the annotation cursor in the 
desired location before typing.
• Press Return to move to the next line.
NOTE:  Annotations wrap to the next line when they are within one 
character of the right margin if Word Wrapping is selected in the 
Text...

Scanning/Display Functions
6-14 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Annotating an image with typed words (continued)
Editing while
annotatingBackspace over any error(s) made.  Blank spaces take the place 
of the letter(s) that were there.  Continue typing the annotation 
after backspacing over all incorrect letters.
To delete previous character(s):
• Press Backspace as many times as necessary to make the 
deletion. 
•  Once all texts within the selected text group are deleted, 
then...

Annotating an Image
LOGIQ 5 Basic User Manual 6-15
Direction 2300002-100 Rev. 2
Body Patterns
An additional way to annotate the image display is with body 
patterns.  Body patterns are a simple graphic of a portion of the 
anatomy that is frequently scanned. The body pattern and probe 
marker can serve as a reference for a patient and probe 
positioning when images are archived or scanned.
To activate body patterns, press the Body Pattern/Ellipse 
control. A maximum of 6 body pattern packages are...

Scanning/Display Functions
6-16 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Body Patterns (continued)
Select the desired body pattern on the Touch Panel.  The 
selected body pattern is displayed on the monitor.
Press the Move Pattern control on the Touch Panel to 
reposition the body pattern with the Trackball and Set controls.
A probe mark is associated with the body patterns and illustrates 
the probe position on the body pattern.  This marker can be 
placed with the Trackball and rotated...

Annotating an Image
LOGIQ 5 Basic User Manual 6-17
Direction 2300002-100 Rev. 2
Body Patterns (continued)
 Figure 6-6. Body Patterns Available
123 456789
10 11 12 13 14 15 16 17 18
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53 5419 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36
55 56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71 72
91 92 93 94 95 96 97 98 99
100 101 102
1 0 9 11 0 111103 104 105 106 107 108 73 74 75 76 77 78 79 80 81
82 83 84 85 86 87 88 89 90 

Scanning/Display Functions
6-18 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Body Patterns (continued)
1.  abdom1 29. fetus9 57. leg6 85. twin7
2.  abdom2 30. fetus10 58. leg7 86. twin8
3.  abdom3 31. fetus11 59. leg8 87. uro1
4.  abdom4 32. fetus12 60. liver 88. uro2
5.  arm1 33. fetus13 61. neck1 89. uro3
6.  arm2 34. fetus14 62. neck2 90. uro4
7.  arm3 35. fetus15 63. neck3 91. uro5
8.  arm4 36. fetus16 64. neck4 92. uro6
9.  arm5 37. hand1 65. ob1 93. uro7
10. arm6 38. hand2 66. ob2 94....

Using iLinq
LOGIQ 5 Basic User Manual 6-19
Direction 2300002-100 Rev. 2
Using iLinq
iLinq
iLinq is your direct link with GE Online Service Engineer and 
Applications Support. 
Using iLinq
The iLinq Home Page displays the following information:
•  Your most recent mail message is displayed, along with the 
number of unread mail messages in the queue for you to 
read. 
•  Link Buttons along the left side of the screen give you direct 
access to the following points of contact: Contact GE, 
Applications,...

Scanning/Display Functions
6-20 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
iLinq Home Page
From this screen you can access other iLinqs by pressing the 
buttons on the left side of the display. To contact GE to report a 
problem or to get GE telephone numbers, press the Contact GE 
key.