GE F650 Manual

CHAPTER 8:  F650 TROUBLESHOOTING GUIDE8.1 SYMPTOMS AND RECOMMENDED ACTIONS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER 8-3
CategorySymptomPossible causeRecommended action
Communications Cannot see properly 
the web 

server in F650 
with Windows XP. 
Some windows are in 
gr
 ey with a red cross 
mark. 1.- Disabled Java options in Advanced 
In

ternet Explorer properties or high 
level of security
2.- Nor Java Virtual Machine installed. 1.1- Go to Advanced in Internet 
options
for Internet explorer and...

8-4F650 DIGITAL BAY CONTROLLER GEK-113000-AF
8.1 SYMPTOMS AND RECOMMENDED ACTIONS CHAPTER 8:  F650 TROUBLESHOOTING GUIDE
CategorySymptomPossible causeRecommended action
Bootware The relay gets stuck at 
“Send

ing f ile 
imagen_kernel...” -The Ethernet connection does not 
work pr
operly. Serial communications work properly 
and the fla
sh memory has been 
erased but Ethernet communication 
does not work properly, check:
•   R
J45 cable used (crossover cable for 
back-to-back connection and straight...

CHAPTER 8:  F650 TROUBLESHOOTING GUIDE8.1 SYMPTOMS AND RECOMMENDED ACTIONS
GEK-113000-AFF650 DIGITAL BAY CONTROLLER 8-5
FirmwareIt is not possible to to 
upgra
de models 
without IEC 61850 to 
models with IEC 61850 
automatically - IEC 61850 upgrade from standard 
mo
dels is password protected. • 
To upgrade from a standard model 
to a 6 model, ask the factory for an 
upgrade package, depending on the 
hardware the existing unit has. If it is 
hardware 00 a hardware and 
firmware change is required...

8-6F650 DIGITAL BAY CONTROLLER GEK-113000-AF
8.1 SYMPTOMS AND RECOMMENDED ACTIONS CHAPTER 8:  F650 TROUBLESHOOTING GUIDE 

GEK-113000-AFF650 DIGITAL BAY CONTROLLER A-1
F650 Digital Bay Controller
Appendix A:  
GE
Grid Solutions
LOGIC OPERANDS
A.1  Operands - F650 - model FX - GX
OPERANDS - F650 - MODEL FX - GX
Internal System Status
autocheck internal states (critical)
DSP Internal States (Critical to metering and 
pr

otection) DSP COMM ERROR
DSP Communication Error: (0) Rignt communications 
between DSP and ma

in processor; (1) Communication 
Error between DSP and main processor
MAGNETIC MODULE 
ERR
 OR Magnetic Module...

A-2F650 DIGITAL BAY CONTROLLER GEK-113000-AF
A.1 OPERANDS - F650 - MODEL FX - GX APPENDIX A:  
IEC61850 Internal StatesICD STATUSUNKNOWN: when the relay has not the IEC61850 
pr

otocol in the relay model the ICD status is unknow to 
the unit
ICD ERROR: There is an error in the ICD file and the 
re
 lay ICD is not operative. To solve this issue it is 
necessary to send a correct ICD to the relay using the 
IEC61850 configurator tool. When the ICD error is raised 
the IEC 61850 will not be operative (the...

APPENDIX A:  A.1 OPERANDS - F650 - MODEL FX - GX
GEK-113000-AFF650 DIGITAL BAY CONTROLLER A-3
Note: It is advisable to use the critical alarms to raise an event or to light a warning LED for maintenance purposes. See 
the example below, the Board X Status depends on the relay model.
Figure A–1: Protection Alarm Signal
Conf igurable Logic Outputs (512 elements) VIRTUAL OUTPUT 000
Configurable logic output 000
VIRTUAL OUTPUT 001 Configurable logic output 001
... ...
VIRTUAL OUTPUT 511 Configurable logic...

A-4F650 DIGITAL BAY CONTROLLER GEK-113000-AF
A.1 OPERANDS - F650 - MODEL FX - GX APPENDIX A:  
Control Event Bits (128 elements)CONTROL EVENT 1
Control Event 1 Activation Bit
CONTROL EVENT 2 Control Event 2 Activation Bit
... ...
CONTROL EVENT 128 Control Event 128 Activation Bit
Latched Virtual Inputs (32 elements) LATCHED VIRT IP 1
Latched virtual input 1
LATCHED VIRT IP 2 Latched virtual input 2
... ...
LATCHED VIRT IP 32 Latched virtual input 32
Self Reset Virtual Inputs (32 elements) SELF-RST VIRT...

APPENDIX A:  A.1 OPERANDS - F650 - MODEL FX - GX
GEK-113000-AFF650 DIGITAL BAY CONTROLLER A-5
Contact Inputs Type 5 Board (Digital Values)CONT IP_X_CC1
Input 1 (CC1) in Board X
CONT IP_X_CC2 Input 2 (CC2) in Board X
... ...
CONT IP_X_CC16 Input 16 (CC16) in Board X
Contact Inputs Type 5 Board (Analog Values) ANALOG_INP_X_01
Analog Input 01 in Board X
ANALOG_INP_X_02 Analog Input 02 in Board X
ANALOG_INP_X_03 Analog Input 03 in Board X
... ...
ANALOG_INP_X_08 Analog Input 08 in Board X
Contact Outputs...

A-6F650 DIGITAL BAY CONTROLLER GEK-113000-AF
A.1 OPERANDS - F650 - MODEL FX - GX APPENDIX A:  
Switchgear states (16 elements)SWITCH 1 OPEN
switchgear 1 open
SWITCH 1 CLOSED switchgear 1 closed
SWITCH 1 00_ERROR Error 00 switchgear 1 (contact A = 0, contact B = 0)
SWITCH 1 11_ERROR Error 11 switchgear 1 (contact A = 1, contact B = 1)
SWITCH 2 OPEN Switchgear 2 open
SWITCH 2 CLOSED Switchgear 2 closed
SWITCH 2 00_ERROR Error 00 switchgear 2 (contact A = 0, contact B = 0)
SWITCH 2 11_ERROR Error 11...