Fujifilm Camera X100t Owners Manual

							Insert the memory card.
Holding the memory card in the orientation shown, slide it in until it clicks into place at
the back of the slot.
Be sure card is in the correct orientation; do not insert at an angle or use force. If
the memory card is not correctly inserted or no memory card is inserted,   will
appear in the LCD monitor and internal memory will be used for recording and
playback.
3. 
Close the battery-chamber cover.4. 
Inserting the Battery and a Memory Card
002D0020 003500310020 002D  
						

							Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera off  and open the battery-
chamber cover.
To remove the battery, press the battery latch to  the side, and slide the battery out of the
camera as shown.
To remove the memory card, press it in an d release it slowly. The card can then be
removed by hand. When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Inserting the Battery and a Memory Card
002D0020 003500320020 002D  
						

							Rotate the [ON/OFF]  switch to [ON] to turn the camera on. Select  [OFF] to turn the camera
off.
Press the   button to start playback. Pre ss the shutter button halfway to return to
shooting mode.
The camera will turn off automatically if no  operations are performed for the length of
time selected for  [POWER MANAGEMENT]  > [AUTO POWER OFF]  in the setup
menu. To reactivate the camera after it ha s turned off automatically, press the shutter
button halfway or turn the  [ON/OFF] switch to [OFF] and then back to  [ON].
Fingerprints and other marks on the lens or  viewfinder can affect pictures or the view
through the viewfinder. Keep the lens and viewfinder clean.
Turning the Camera on and Off
002D0020 003500330020 002D  
						

							Battery Level
After turning the camera on, check the battery level in the display.
Battery close to fully charged.
Battery about two-thirds charged.
Battery about one-third charged. Charge as soon as possible.
(red) Battery exhausted. Turn came
ra off and recharge battery.
Turning the Camera on and Off
002D0020 003500340020 002D  
						

							A language-selection dialog is displayed the first time the camera is turned on. Set up the
camera as described below (you can reset the clock or change languages at any time using the
[DATE/TIME]  or []  options in the setup menu).
Using the Selector
Press the selector up, down, left, or  right to highlight items and press [MENU/OK] to
select.
Move cursor up
Move cursor right
Move cursor down
Move cursor left
Select highlighted item
Basic Setup
002D0020 003500350020 002D  
						

							Turn the camera on.1. 
Highlight a language and press [MENU/OK].
Press [DISP/BACK]  to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
2. 
The date and time will be displayed. Press the  selector left or right to highlight the year,
month, day, hour, or minute and press up or  down to change. To change the order in
which the year, month, and day are displayed,  highlight the date format and press the
selector up or down. Press  [MENU/OK] when settings are complete.
If the battery is removed for an extended  period, the camera clock will be reset
and the language-selection dialog will be displayed when the camera is turned on.
3. 
Basic Setup
002D0020 003500360020 002D  
						

							Taking Photographs
Viewing Pictures
Deleting Pictures
Basic Photography and Playback
002D0020 003500370020 002D  
						

							This section describes how to take pictures using program AE (mode [P]).
Adjust settings for program AE.
Shutter speed : Select [A] (auto)
Exposure compensation : Select [±0]
Focus mode: Select  [S] (single AF)
Aperture : Select [A] (auto)
1. 
Taking Photographs
002D0020 003500380020 002D  
						

							Confirm that [P] appears in the display.
OVF
EVF/LCD
Viewfinder Display Selection
Use the viewfinder selector to switch  between the optical viewfinder (OVF) and
electronic viewfinder (EVF) displays.
Taking Photographs
002D0020 003500390020 002D  
						

							Ready the camera.
Hold the camera steady with both hands and brace your elbows against your sides.
Shaking or unsteady hands can blur your shots.
To prevent pictures that are out of focus or  too dark (underexposed), keep your fingers
and other objects away from the lens and flash.2. 
Taking Photographs
002D0020 003600300020 002D