Fujifilm Camera X100t Owners Manual

							The image will be magnified in the display to assist focus when the focus ring is rotated in
manual focus mode.
[FOCUS CHECK]
002D0020 0032003300310020 002D  
						

							Adjust sound settings.
[OPERATION VOL.]
[SHUTTER VOLUME]
[SHUTTER SOUND]
[PLAYBACK VOLUME]
Adjust the volume of the sounds produced when camera controls are operated. Choose 
(mute) to disable control sounds.
Adjust the volume of the sounds produced wh en the shutter is released. Choose   (mute)
to disable the shutter sound.
Choose the sound made by the shutter.
Adjust the volume for movie playback.
[SOUND SET-UP]
002D0020 0032003300320020 002D  
						

							CONTINUOUS
[1.5 SEC]/[0.5 SEC] [OFF]
Adjust display settings.
[IMAGE DISP.]
[EVF AUTOROTATE DISPLAYS]
[PREVIEW EXP. IN MANUAL MODE]
[MONITOR SUNLIGHT MODE]
[EVF BRIGHTNESS]
[EVF COLOR]
[LCD BRIGHTNESS]
[LCD COLOR]
[PREVIEW PIC. EFFECT]
[FRAMING GUIDELINE]
[AUTOROTATE PB]
[FOCUS SCALE UNITS]
Choose how long images are displayed after shoot ing. Colors may differ slightly from those in
the final image.
Pictures are displayed until the  [MENU/OK] button is pressed
or the shutter button is pressed  halfway. To zoom in on the
active focus point, press the center of the command dial; press
again to cancel zoom.
Pictures are displayed for 1.5 seconds ( [1.5 SEC]) or 0.5
seconds ( [0.5 SEC] ) or until the shutter button is pressed
halfway.
Pictures are not displayed after shooting.
Choose whether the indicators in the viewfi nder rotate to match camera orientation.
The display in the LCD monitor is unaffected.
[SCREEN SET-UP]
002D0020 0032003300330020 002D  
						

							Select [ON] to enable exposure preview in  manual exposure mode. Select  [OFF] when using a
flash or on other occasions on which exposu re may change when the picture is taken.
Select [ON] to make the display in the monitor  easier to read in bright light.
Press and hold the [VIEW MODE] button for monitor sunlight mode.
Adjust the brightness of the display in the electronic viewfinder, or choose  [AUTO] for
automatic brightness adjustment.
Adjust the hue of the display in the electronic viewfinder.
Adjust monitor brightness.
Adjust monitor hue.
Choose  [ON] to preview the effects of film simulation , white balance, and other settings in the
monitor. Choose  [OFF] to make shadows in low-contrast, back-lit scenes and other hard-to-see
subjects more visible.
If  [OFF]  is selected, the effects of camera settin gs will not be visible in the monitor and
colors and tone will differ from those in the final picture. The display will however be
adjusted to show the effects of advanced  filters and of monochrome and sepia settings.
[SCREEN SET-UP]
002D0020 0032003300340020 002D  
						

							GRID 9
GRID 24
HD FRAMING
Choose the type of framing grid available in shooting mode. For “rule of thirds” composition.
A six-by-four grid.
Frame HD pictures in the crop sh own by the lines at the top and
bottom of the display.
[SCREEN SET-UP]
002D0020 0032003300350020 002D  
						

							Choose [ON] to automatically rotate “tall” (portrai t-orientation) pictures during playback.
Choose the units used for the focus distance indicator.
[SCREEN SET-UP]
002D0020 0032003300360020 002D  
						

							[Fn BUTTON]
[FOCUS AREA]
Choose the roles played by the up, down,  left, and right buttons on the selector.
The selector buttons serv e as function buttons.
The selector can be used to position the focus area.
[SELECTOR BUTTON SETTING]
002D0020 0032003300370020 002D  
						

							Choose the items displayed in the quick menu.Display the setup menu and select  [EDIT/SAVE QUICK MENU].
1. 
Highlight the item you wish to change and press  [MENU/OK]. You will be given the
following choice of items to assign to the selected position in the quick menu.
Select  [NONE]  to assign no item to the selected position.
When [SELECT CUSTOM SETTING]  is selected, the quick menu shows current
settings as  [BASE].
2. 
Highlight the desired item and press  [MENU/OK] to assign it to the selected position in
the quick menu.3. 
[SELECT CUSTOM SETTING]
[ISO]
[DYNAMIC RANGE]
[WHITE BALANCE]
[NOISE REDUCTION]
[IMAGE SIZE]
[IMAGE QUALITY]
[FILM SIMULATION]
[HIGHLIGHT TONE]
[SHADOW TONE]
[COLOR]
[SHARPNESS]
[SELF-TIMER]
[FACE DETECTION]
[PHOTOMETRY]
[AF MODE]
[FLASH MODE]
[FLASH COMPENSATION]
[MF ASSIST]
[MOVIE MODE]
[MOVIE ISO]
[MIC LEVEL ADJUSTMENT]
[SILENT MODE]
[EVF/LCD BRIGHTNESS]
[EVF/LCD COLOR]
[ADVANCED FILTER]
[CONVERSION LENS]
[SHUTTER TYPE]
[ND FILTER]
[EDIT/SAVE QUICK MENU]
002D0020 0032003300380020 002D  
						

							Adjust power management settings.
[AUTO POWER OFF]
[OVF POWER SAVE MODE]
[HIGH PERFORMANCE]
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times reduce  the drain on the battery; if [OFF] is selected, the camera
must be turned off manually. Note that in some  situations the camera turns off automatically
even when  [OFF] is selected.
Select [ON] to reduce power consumpt ion and increase the number of pictures that can be
taken on a single charge when pictures are framed in the optical viewfinder.
Power consumption is not redu ced when the electronic viewfinder or electronic range
finder is used.
Select  [ON] for faster focus and to reduce the time  needed to restart the camera after it has
been turned off.
[POWER MANAGEMENT]
002D0020 0032003300390020 002D  
						

							View the approximate number of times the shutter has been released. Other actions may also
increment the counter, for example turning the camera off, changing the viewfinder display
selection, or choosing playback mode.
[SHUTTER COUNT]
002D0020 0032003400300020 002D